我使用的是 2008 MegaRAID SAS 8888ELP。我无法启动到 webbios，尽管我能够将 storcli 安装到我的 arch linux 设置上。虽然我是 raid 和 storcli 的新手，但 raid 运行良好。
目前，我运行的storcli /c0 show结果是：
Controller = 0
Status = Success
Description = None
Product Name = MegaRAID SAS 8888ELP
Serial Number = P037780510
SAS Address = 500605b001d4afa0
PCI Address = 00:01:00:00
System Time = 10/17/2016 21:02:12
Mfg. Date = 02/06/10
Controller Time = 10/17/2016 21:02:11
FW Package Build = 9.0.1-0038
FW Version = 1.20.42-0525
BIOS Version = 2.01.00
Driver Name = megaraid_sas
Driver Version = 06.811.02.00-rc1
Vendor Id = 0x1000
Device Id = 0x60
SubVendor Id = 0x1000
SubDevice Id = 0x1006
Host Interface = PCI-E
Device Interface = SAS-3G
Bus Number = 1
Device Number = 0
Function Number = 0
Total foreign drive groups = 0
Physical Drives = 3
PD LIST :
=======
-------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
-------------------------------------------------------------------------
252:0 44 UGood - 1.999 TB SATA HDD N N 512B TOSHIBA DT01ACA300 U
252:4 46 UGood - 1.999 TB SATA HDD N N 512B ST4000DM000-1F2168 U
252:5 45 UGood - 1.999 TB SATA HDD N N 512B ST3000DM001-9YN166 U
-------------------------------------------------------------------------
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
磁盘的大小表示为1.999 TB。如果你向右看一点，它描述了磁盘的实际大小。ST4000DM000是一个4 TB驱动器，ST3000DM001是一个3TB驱动器，而东芝是一个3TB。
为什么它显示为2TB？我如何告诉团队它们是更大的驱动器？
我可以使用任何 storcli 命令来执行此操作吗？
感谢您的所有帮助！
答案1
我认为您需要更新控制器上的固件。我的 RS2BL08 控制器 (intel) 也遇到了同样的问题（据我所知），更新控制器固件后，我可以将磁盘扩展到更大的尺寸。