MySQL(MariaDB)无法启动

MySQL(MariaDB)无法启动

我在 64 位安装上运行 Arch Linux 4.8.4-1。我通过 安装了 MariaDB pacman。当我尝试使用 启动它时systemctl start mysqld,它给了我

Job for mariadb.service failed because the control process exited with error code.
See "systemctl status mariadb.service" and "journalctl -xe" for details.

的输出systemctl status mariadb.service

● mariadb.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Wed 2016-11-02 16:55:12 IST; 3min 6s ago
  Process: 5123 ExecStart=/usr/sbin/mysqld $MYSQLD_OPTS $_WSREP_NEW_CLUSTER $_WSREP_START_POSITION (code=exited, status=1/FAILURE)
  Process: 5070 ExecStartPre=/bin/sh -c [ ! -e /usr/bin/galera_recovery ] && VAR= ||   VAR=`/usr/bin/galera_recovery`; [ $? -eq 0 ]   && systemctl set
  Process: 5067 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
 Main PID: 5123 (code=exited, status=1/FAILURE)
   Status: "MariaDB server is down"

Nov 02 16:55:11 pranav-laptop systemd[1]: Starting MariaDB database server...
Nov 02 16:55:12 pranav-laptop mysqld[5123]: 2016-11-02 16:55:12 140082509282496 [Note] /usr/sbin/mysqld (mysqld 10.1.18-MariaDB) starting as process 5
Nov 02 16:55:12 pranav-laptop mysqld[5123]: 2016-11-02 16:55:12 140082509282496 [Warning] Can't create test file /var/lib/mysql/pranav-laptop.lower-te
Nov 02 16:55:12 pranav-laptop mysqld[5123]: [90B blob data]
Nov 02 16:55:12 pranav-laptop systemd[1]: mariadb.service: Main process exited, code=exited, status=1/FAILURE
Nov 02 16:55:12 pranav-laptop systemd[1]: Failed to start MariaDB database server.
Nov 02 16:55:12 pranav-laptop systemd[1]: mariadb.service: Unit entered failed state.
Nov 02 16:55:12 pranav-laptop systemd[1]: mariadb.service: Failed with result 'exit-code'.

如果我需要发布其他内容,请告诉我...

更新:尝试了 Jérémy Munoz 的评论后,mysql 仍然无法启动,但我得到了不同的systemctl status mariadb.service

● mariadb.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Wed 2016-11-02 21:03:24 IST; 4min 7s ago
  Process: 14350 ExecStart=/usr/sbin/mysqld $MYSQLD_OPTS $_WSREP_NEW_CLUSTER $_WSREP_START_POSITION (code=exited, status=1/FAILURE)
  Process: 14296 ExecStartPre=/bin/sh -c [ ! -e /usr/bin/galera_recovery ] && VAR= ||   VAR=`/usr/bin/galera_recovery`; [ $? -eq 0 ]   && systemctl se
  Process: 14294 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
 Main PID: 14350 (code=exited, status=1/FAILURE)

Nov 02 21:03:24 pranav-laptop mysqld[14350]: 2016-11-02 21:03:24 140412958252224 [ERROR] Could not open mysql.plugin table. Some plugins may be not lo
Nov 02 21:03:24 pranav-laptop mysqld[14350]: 2016-11-02 21:03:24 140412958235392 [Warning] Failed to load slave replication state from table mysql.gti
Nov 02 21:03:24 pranav-laptop mysqld[14350]: 2016-11-02 21:03:24 140412362684160 [Note] InnoDB: Dumping buffer pool(s) not yet started
Nov 02 21:03:24 pranav-laptop mysqld[14350]: 2016-11-02 21:03:24 140412958252224 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' d
Nov 02 21:03:24 pranav-laptop mysqld[14350]: 2016-11-02 21:03:24 140412958252224 [Note] Server socket created on IP: '::'.
Nov 02 21:03:24 pranav-laptop mysqld[14350]: 2016-11-02 21:03:24 140412958252224 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mys
Nov 02 21:03:24 pranav-laptop systemd[1]: mariadb.service: Main process exited, code=exited, status=1/FAILURE
Nov 02 21:03:24 pranav-laptop systemd[1]: Failed to start MariaDB database server.
Nov 02 21:03:24 pranav-laptop systemd[1]: mariadb.service: Unit entered failed state.
Nov 02 21:03:24 pranav-laptop systemd[1]: mariadb.service: Failed with result 'exit-code'.

更新:运行后mysql_install_db,出现此错误:

FATAL ERROR: Could not find ./bin/my_print_defaults

If you compiled from source, you need to either run 'make install' to
copy the software into the correct location ready for operation.
If you don't want to do a full install, you can use the --srcddir
option to only install the mysql database and privilege tables

If you are using a binary release, you must either be at the top
level of the extracted archive, or pass the --basedir option
pointing to that location.

The latest information about mysql_install_db is available at
https://mariadb.com/kb/en/installing-system-tables-mysql_install_db

/etc/mysql/my.cnf

答案1

如果您的数据库中没有任何真实数据,则清除所有数据/var/lib/mysql

之后再次尝试运行命令mysql_install_db --user=mysql --basedir=/usr --datadir=/var/lib/mysql来初始化数据库目录。

mariadb 的较新命令是mariadb-install-db --user=mysql --basedir=/usr --datadir=/var/lib/mysql

答案2

cd /var/lib/mysql
ls
rm -r *
mysql_install_db --user=mysql --basedir=/usr --datadir=/var/lib/mysql
systemctl start mysqld
systemctl start mysql.service
systemctl start mariadb
mysql

然后它就可以正常工作了

答案3

您需要运行mysql_install_db来初始化 MySQL 数据目录。

答案4

我在 Ubuntu 18.04m 上遇到了同样的问题,注册的软件包似乎无法启动,否则......

我通过添加正确的包列表和签名来解决本网站

sudo apt-get install software-properties-common
sudo apt-key adv --recv-keys --keyserver hkp://keyserver.ubuntu.com:80 0xF1656F24C74CD1D8
sudo add-apt-repository 'deb [arch=amd64,arm64,ppc64el] http://mariadb.mirrors.ovh.net/MariaDB/repo/10.3/ubuntu bionic main'
sudo apt update
sudo apt install mariadb-server

瞧瞧……

相关内容