我无法使用 wpa_supplicant 设置无线接口上的 essid 和其他参数。
使用 -Dwext 抛出ioctl[SIOCSIWENCODEEXT]
$ sudo wpa_supplicant -B -i wlan0 -Dwext -c universitywpa
Successfully initialized wpa_supplicant
ioctl[SIOCSIWENCODEEXT]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Invalid argument
并且也无法设置 ESSID：
$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
如果我使用-Dnl80211，则不会引发 IOCTL 错误：
$ sudo wpa_supplicant -B -i wlan0 -Dnl80211 -c universitywpa
Successfully initialized wpa_supplicant
但 ESSID 仍然关闭/任意：
$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
我使用 -d （详细）运行相同的命令来查看可能发生的情况：
$ sudo wpa_supplicant -B -i wlan0 -Dnl80211 -c universitywpa -d
wpa_supplicant v2.3
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf 'universitywpa' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'universitywpa' -> '/home/my-user/repos/university_connect/universitywpa'
Reading configuration file '/home/my-user/repos/university_connect/universitywpa'
Priority group 0
id=0 ssid='UNIVERSITY-SECURE'
rfkill: initial event: idx=0 type=2 op=0 soft=0 hard=0
rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
rfkill: initial event: idx=43 type=2 op=0 soft=0 hard=0
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Using driver-based off-channel TX
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x7ff6aa428fc0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=040a
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=040b
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=040c
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=040d
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=090a
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=090b
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=090c
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=090d
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=0409506f9a09
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=7f506f9a09
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=0801
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 08 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=06
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=0a07
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7ff6aa428fc0 match=0a11
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 11
nl80211: Failed to register Action frame processing - ignore for now
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
nl80211: driver param='(null)'
Add interface wlan0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlan0: Own MAC address: a0:88:b4:98:95:d4
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlan0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlan0: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
wlan0: WPS: UUID based on MAC address: 886beebd-10cf-544f-bba7-5c23f8ceb3b3
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlan0: Added interface wlan0
wlan0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
Daemonize..
$
我注意到这些：
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Failed to register Action frame processing - ignore for now
但我不确定如何解释这一点。
为什么没有设置 ESSID？
如果我手动运行 iwconfig，我可以设置 ESSID：
sudo iwconfig wlan0 essid UNIVERSITY-SECURE
$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"UNIVERSITY-SECURE"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
$
但显然，要使连接正常工作，需要的不仅仅是 ESSID。
大学wpa的内容：
network={
ssid="UNIVERSITY-SECURE"
scan_ssid=1
key_mgmt=WPA-EAP
pairwise=CCMP TKIP
group=CCMP TKIP
eap=PEAP
identity="my-user"
password="mypass"
ca_cert="university_comodo_cert.pem"
phase1="peapver=0"
phase2="MSCHAPV2"
}
我已经使用这些设置连接其他机器，没有出现任何问题。但我一直使用-Dwext，从未使用-Dnl80211。
lshw无线接口：
*-network
description: Wireless interface
product: Centrino Advanced-N 6205 [Taylor Peak]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 34
serial:
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.16.0-4-amd64 firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
司机是iwlwifi.
这是 iwlwifi 和 -Dnl80211 之间的问题吗？我如何进一步诊断这个问题？
答案1
我最终删除了 -B （在后台运行守护进程）
sudo wpa_supplicant -i wlan0 -c wpaconfig -D nl80211,wext
并意识到我的脚本没有等待连接完成：
wlan0: CTRL-EVENT-CONNECTED - Connection to 00:11:22:33:44:55 completed [id=0 id_str=]
由于没有看到 essid，所以提前中止了。似乎没有选项可以wpa_supplicant仅在 CTRL-EVENT-CONNECTED 时以编程方式要求守护进程，因此我可能必须为此使用 Expect 脚本。