我需要 IPv6 路由方面的帮助，我已经设置了一个带有 IPv6 接口的 Linux 机器eth2，并且该接口与接口绑定bond0
详情如下
cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
NAME=bond0
TYPE=Bond
BONDING_MASTER=yes
IPADDR="10.54.48.82"
NETMASK="255.255.254.0"
GATEWAY="10.54.48.1"
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
cat /etc/sysconfig/network-scripts/ifcfg-eth2
IPV6INIT=yes
IPV6ADDR=fd00:10:6b50:4300::52/60
IPV6_DEFAULTGW=fd00:10:6b50:4300::1
ONBOOT="yes"
DEVICE="eth2"
/sbin/ip -6 route show
unreachable ::/96 dev lo metric 1024 error -113
unreachable ::ffff:0.0.0.0/96 dev lo metric 1024 error -113
unreachable 2002:a00::/24 dev lo metric 1024 error -113
unreachable 2002:7f00::/24 dev lo metric 1024 error -113
unreachable 2002:a9fe::/32 dev lo metric 1024 error -113
unreachable 2002:ac10::/28 dev lo metric 1024 error -113
unreachable 2002:c0a8::/32 dev lo metric 1024 error -113
unreachable 2002:e000::/19 dev lo metric 1024 error -113
unreachable 3ffe:ffff::/32 dev lo metric 1024 error -113
fd00:10:6b50:4300::/60 dev bond0 proto kernel metric 256 expires 2591984sec
fd00:10:6b50:4300::/60 dev eth2 proto kernel metric 256
fe80::/64 dev bond0 proto kernel metric 256
default via fd00:10:6b50:4300::1 dev bond0 metric 1
default via fe80::7ae3:b5ff:feec:6500 dev bond0 proto ra metric 1024 expires 1784sec hoplimit 64
接口详细信息如下：
ifconfig
bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST> mtu 1500
inet 10.54.48.82 netmask 255.255.254.0 broadcast 10.54.49.255
inet6 fe80::2e76:8aff:fe51:1e40 prefixlen 64 scopeid 0x20<link>
ether 2c:76:8a:51:1e:40 txqueuelen 1000 (Ethernet)
RX packets 560384 bytes 47006541 (44.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5254 bytes 1034248 (1010.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet6 fd00:10:6b50:4300::52 prefixlen 60 scopeid 0x0<global>
ether 2c:76:8a:51:1e:42 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 51
当我从盒子里发出 ping 声时，
ping6 fd00:10:6b50:4510::b3
PING fd00:10:6b50:4510::b3(fd00:10:6b50:4510::b3) 56 data bytes
From fe80::7ae3:b5ff:feec:6500%bond0 icmp_seq=1 Destination unreachable: Beyond scope of source address
From fe80::7ae3:b5ff:feec:6500%bond0 icmp_seq=2 Destination unreachable: Beyond scope of source address
From fe80::7ae3:b5ff:feec:6500%bond0 icmp_seq=3 Destination unreachable: Beyond scope of source address
获取Destination unreachable: Beyond scope of source address
我在这里可能做错了什么？我怎样才能让设备 ping IPv6 地址？