我认为我在更换 ZFS RaidZ2 池中的故障驱动器时搞砸了。我想我忘记先将故障驱动器脱机，然后运行替换命令，现在它似乎创建了一个临时镜像池。有什么技巧可以纠正此问题而不破坏池吗？
NAME STATE READ WRITE CKSUM
storage DEGRADED 0 0 1
raidz2-0 DEGRADED 0 0 2
replacing-0 DEGRADED 0 0 0
10188385608277313659 UNAVAIL 0 0 0 was /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F4X76S-part1
sda ONLINE 0 0 0
ata-ST3000DM001-1CH166_W1F5C09L ONLINE 0 0 0
ata-ST3000DM001-1CH166_Z1F4C9ZF ONLINE 0 0 0
ata-ST3000DM001-1CH166_Z1F50YNJ ONLINE 0 0 0
sde ONLINE 0 0 0
sdf ONLINE 0 0 0
以下是 zpool status -v 的简要总结
pool: storage
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://zfsonlinux.org/msg/ZFS-8000-8A
scan: resilvered 131G in 11h41m with 1 errors on Sat Mar 16 09:33:47 2019
config:
NAME STATE READ WRITE CKSUM
storage DEGRADED 0 0 1
raidz2-0 DEGRADED 0 0 2
replacing-0 DEGRADED 0 0 0
10188385608277313659 UNAVAIL 0 0 0 was /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F4X76S-part1
sda ONLINE 0 0 0
ata-ST3000DM001-1CH166_W1F5C09L ONLINE 0 0 0
ata-ST3000DM001-1CH166_Z1F4C9ZF ONLINE 0 0 0
ata-ST3000DM001-1CH166_Z1F50YNJ ONLINE 0 0 0
sde ONLINE 0 0 0
sdf ONLINE 0 0 0
errors: Permanent errors have been detected in the following files:
storage:/plex_db_backup/com.plexapp.plugins.library.db-2017-09-21
答案1
这可能只是正在运行的替换和重新镀银过程。
请显示完整输出zpool status -v。
好的，跑吧zpool clear storage。
确保zpool status此后反射重新镀银。