需要创建路由以绕过 VPN,该 VPN 将全部流量分配为默认路由

需要创建路由以绕过 VPN,该 VPN 将全部流量分配为默认路由

我有 2 个 VPN:utun0 和 ppp0。

ip r s
default via 175.15.105.123 dev utun0
default via 192.168.0.1 dev en0
127.0.0.0/8 via 127.0.0.1 dev lo0
169.254.0.0/16 dev en0  scope link
10.0.15.0/24 via ppp0 dev ppp0

当我连接到 utun0 时,ppp0 停止工作,因为它为自己分配了完整的网络连接。

但我希望 ppp0 服务仍然可用,即 10.0.15.0/24

当我尝试使用创建路线时

ip route add 10.0.15.0/24 via 10.0.15.100 dev en0

它没有帮助,所有请求仍然不起作用

更新

ip l s
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
    nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
XHC20: flags=0<> mtu 0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1300
    ether 60:f8:1d:b1:f8:5c 
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 02:f8:1d:b1:f8:5c 
    media: autoselect
    status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
    ether ea:3a:29:c1:d5:a3 
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 72:00:07:7c:d8:b0 
    media: autoselect <full-duplex>
    status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 72:00:07:7c:d8:b1 
    media: autoselect <full-duplex>
    status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether 72:00:07:7c:d8:b0 
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en1 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 8 priority 0 path cost 0
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 9 priority 0 path cost 0
    nd6 options=201<PERFORMNUD,DAD>
    media: <unknown type>
    status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1200
    nd6 options=201<PERFORMNUD,DAD>
 ip a s
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1/8 lo0
    inet6 ::1/128
    inet6 fe80::1/64 scopeid 0x1
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1300
    ether 60:f8:1d:b1:f8:5c
    inet6 fe80::60:f174:65a8:ec30/64 secured scopeid 0x5
    inet 192.168.0.141/24 brd 192.168.0.255 en0
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
    ether ea:3a:29:c1:d5:a3
    inet6 fe80::e83a:29ff:fec1:d5a3/64 scopeid 0x7
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1080
    inet 10.0.15.100 --> 10.0.15.0/24 ppp0
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1200
    inet 175.15.105.123 --> 175.15.105.123/32 utun0

答案1

我自己解决了。

sudo route add-net 192.168.0.141/24 gw en0

它现在可以工作了。

相关内容