我刚购买了 9 个 SAS 驱动器来创建我的家庭存储。8 个驱动器将在 Raid 6 中工作，第 9 个驱动器是备用的。但是，在购买 LSI MegaRaid 9261-8i 并仅连接 6 个驱动器进行测试后，卡将卡检测为“未配置良好（不支持）”。在互联网上搜索后，我发现了一个类似的问题，即驱动器的格式化扇区大小为 520，解决方案是将其格式化为扇区大小为 512B。但是，我无法在 Windows10 或 CentOs7 上独立（直接）看到驱动器。
我在 Windows 上安装了 MegaRaid Storage Manager，它显示扇区大小为 512B。然而，当发出命令时MegaCli64.exe -PDList -aALL，它显示扇区大小为 0。
我的 LSI 卡
我的硬盘链接
F:\Downloads\Compressed\8-07-14_MegaCLI\Windows>MegaCli64.exe -PDList -aALL
Adapter #0
Enclosure Device ID: 252
Slot Number: 0
Enclosure position: N/A
Device Id: 52
WWN: 5000C500563289E4
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 3.462 TB [0x1bb5bea00 Sectors]
Non Coerced Size: 3.462 TB [0x1bb4bea00 Sectors]
Coerced Size: 3.461 TB [0x1bb317000 Sectors]
Sector Size: 0
Logical Sector Size: 0
Physical Sector Size: 0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: E06A
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c500563289e5
SAS Address(1): 0x0
Connected Port Number: 3(path0)
Inquiry Data: IBM-SSG S7CR4P0 E06AZ1Z0D1K5 02E06A
FDE Capable: Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 1
Enclosure position: N/A
Device Id: 51
WWN: 5000C50055AAC5C0
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 3.462 TB [0x1bb5bea00 Sectors]
Non Coerced Size: 3.462 TB [0x1bb4bea00 Sectors]
Coerced Size: 3.461 TB [0x1bb317000 Sectors]
Sector Size: 0
Logical Sector Size: 0
Physical Sector Size: 0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: E06A
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50055aac5c1
SAS Address(1): 0x0
Connected Port Number: 2(path0)
Inquiry Data: IBM-SSG S7CR4P0 E06AZ1Z055N9 02E06A
FDE Capable: Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 2
Enclosure position: N/A
Device Id: 50
WWN: 5000C50056328B8C
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 3.462 TB [0x1bb5bea00 Sectors]
Non Coerced Size: 3.462 TB [0x1bb4bea00 Sectors]
Coerced Size: 3.461 TB [0x1bb317000 Sectors]
Sector Size: 0
Logical Sector Size: 0
Physical Sector Size: 0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: E06A
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50056328b8d
SAS Address(1): 0x0
Connected Port Number: 1(path0)
Inquiry Data: IBM-SSG S7CR4P0 E06AZ1Z0D1JN 02E06A
FDE Capable: Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 3
Enclosure position: N/A
Device Id: 53
WWN: 5000C500562714A0
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 3.462 TB [0x1bb5bea00 Sectors]
Non Coerced Size: 3.462 TB [0x1bb4bea00 Sectors]
Coerced Size: 3.461 TB [0x1bb317000 Sectors]
Sector Size: 0
Logical Sector Size: 0
Physical Sector Size: 0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: E06A
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c500562714a1
SAS Address(1): 0x0
Connected Port Number: 0(path0)
Inquiry Data: IBM-SSG S7CR4P0 E06AZ1Z0CDBW 02E06A
FDE Capable: Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 4
Enclosure position: N/A
Device Id: 55
WWN: 5000C50056328EB8
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 3.462 TB [0x1bb5bea00 Sectors]
Non Coerced Size: 3.462 TB [0x1bb4bea00 Sectors]
Coerced Size: 3.461 TB [0x1bb317000 Sectors]
Sector Size: 0
Logical Sector Size: 0
Physical Sector Size: 0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: E06D
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50056328eb9
SAS Address(1): 0x0
Connected Port Number: 5(path0)
Inquiry Data: IBM-SSG S7CR4P0 E06DZ1Z0DALL 07E06D
FDE Capable: Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 5
Enclosure position: N/A
Device Id: 54
WWN: 5000C50055B43CE0
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 3.462 TB [0x1bb5bea00 Sectors]
Non Coerced Size: 3.462 TB [0x1bb4bea00 Sectors]
Coerced Size: 3.461 TB [0x1bb317000 Sectors]
Sector Size: 0
Logical Sector Size: 0
Physical Sector Size: 0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: E06A
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50055b43ce1
SAS Address(1): 0x0
Connected Port Number: 4(path0)
Inquiry Data: IBM-SSG S7CR4P0 E06AZ1Z05N22 02E06A
FDE Capable: Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Exit Code: 0x00
F:\Downloads\Compressed\8-07-14_MegaCLI\Windows>MegaCli64.exe -AdpAllInfo -aALL
Adapter #0
==============================================================================
Versions
================
Product Name : LSI MegaRAID SAS 9261-8i
Serial No : SV20503315
FW Package Build: 12.15.0-0239
Mfg. Data
================
Mfg. Date : 01/30/12
Rework Date : 00/00/00
Revision No : 15A
Battery FRU : N/A
Image Versions in Flash:
================
FW Version : 2.130.403-4660
BIOS Version : 3.30.02.2_4.16.08.00_0x06060A05
Preboot CLI Version: 04.04-020:#%00009
WebBIOS Version : 6.0-54-e_50-Rel
NVDATA Version : 2.09.03-0058
Boot Block Version : 2.02.00.00-0000
BOOT Version : 09.250.01.219
Pending Images in Flash
================
None
PCI Info
================
Controller Id : 0000
Vendor Id : 1000
Device Id : 0079
SubVendorId : 1000
SubDeviceId : 9263
Host Interface : PCIE
ChipRevision : B4
Link Speed : 0
Number of Frontend Port: 0
Device Interface : PCIE
Number of Backend Port: 8
Port : Address
0 5000c500562714a1
1 5000c50056328b8d
2 5000c50055aac5c1
3 5000c500563289e5
4 5000c50055b43ce1
5 5000c50056328eb9
6 0000000000000000
7 0000000000000000
HW Configuration
================
SAS Address : 500605b0043623b0
BBU : Absent
Alarm : Present
NVRAM : Present
Serial Debugger : Present
Memory : Present
Flash : Present
Memory Size : 512MB
TPM : Absent
On board Expander: Absent
Upgrade Key : Absent
Temperature sensor for ROC : Absent
Temperature sensor for controller : Absent
Settings
================
Current Time : 8:3:18 6/17, 2019
Predictive Fail Poll Interval : 300sec
Interrupt Throttle Active Count : 16
Interrupt Throttle Completion : 50us
Rebuild Rate : 30%
PR Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruction Rate : 30%
Cache Flush Interval : 4s
Max Drives to Spinup at One Time : 2
Delay Among Spinup Groups : 12s
Physical Drive Coercion Mode : 1GB
Cluster Mode : Disabled
Alarm : Enabled
Auto Rebuild : Enabled
Battery Warning : Disabled
Ecc Bucket Size : 15
Ecc Bucket Leak Rate : 1440 Minutes
Restore HotSpare on Insertion : Enabled
Expose Enclosure Devices : Enabled
Maintain PD Fail History : Enabled
Host Request Reordering : Enabled
Auto Detect BackPlane Enabled : SGPIO/i2c SEP
Load Balance Mode : Auto
Use FDE Only : Yes
Security Key Assigned : No
Security Key Failed : No
Security Key Not Backedup : No
Default LD PowerSave Policy : Automatic
Maximum number of direct attached drives to spin up in 1 min : 10
Auto Enhanced Import : Yes
Any Offline VD Cache Preserved : No
Allow Boot with Preserved Cache : No
Disable Online Controller Reset : No
PFK in NVRAM : No
Use disk activity for locate : Yes
POST delay : 90 seconds
BIOS Error Handling : Stop On Errors
Current Boot Mode :Normal
Capabilities
================
RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Supported Drives : SAS, SATA
Allowed Mixing:
Mix in Enclosure Allowed
Mix of SAS/SATA of HDD type in VD Allowed
Mix of SAS/SATA of SSD type in VD Allowed
Status
================
ECC Bucket Count : 0
Limitations
================
Max Arms Per VD : 32
Max Spans Per VD : 8
Max Arrays : 128
Max Number of VDs : 64
Max Parallel Commands : 1008
Max SGE Count : 80
Max Data Transfer Size : 8192 sectors
Max Strips PerIO : 42
Max LD per array : 16
Min Strip Size : 8 KB
Max Strip Size : 1.0 MB
Max Configurable CacheCade Size: 0 GB
Current Size of CacheCade : 0 GB
Current Size of FW Cache : 0 MB
Device Present
================
Virtual Drives : 0
Degraded : 0
Offline : 0
Physical Devices : 7
Disks : 6
Critical Disks : 0
Failed Disks : 0
Supported Adapter Operations
================
Rebuild Rate : Yes
CC Rate : Yes
BGI Rate : Yes
Reconstruct Rate : Yes
Patrol Read Rate : Yes
Alarm Control : Yes
Cluster Support : No
BBU : Yes
Spanning : Yes
Dedicated Hot Spare : Yes
Revertible Hot Spares : Yes
Foreign Config Import : Yes
Self Diagnostic : Yes
Allow Mixed Redundancy on Array : No
Global Hot Spares : Yes
Deny SCSI Passthrough : No
Deny SMP Passthrough : No
Deny STP Passthrough : No
Support Security : No
Snapshot Enabled : No
Support the OCE without adding drives : Yes
Support PFK : Yes
Support PI : No
Support Boot Time PFK Change : No
Disable Online PFK Change : No
PFK TrailTime Remaining : 0 days 0 hours
Support Shield State : No
Block SSD Write Disk Cache Change: No
Support Online FW Update : Yes
Supported VD Operations
================
Read Policy : Yes
Write Policy : Yes
IO Policy : Yes
Access Policy : Yes
Disk Cache Policy : Yes
Reconstruction : Yes
Deny Locate : No
Deny CC : No
Allow Ctrl Encryption: No
Enable LDBBM : No
Support Breakmirror : No
Power Savings : No
Supported PD Operations
================
Force Online : Yes
Force Offline : Yes
Force Rebuild : Yes
Deny Force Failed : No
Deny Force Good/Bad : No
Deny Missing Replace : No
Deny Clear : No
Deny Locate : No
Support Temperature : Yes
NCQ : No
Disable Copyback : No
Enable JBOD : No
Enable Copyback on SMART : No
Enable Copyback to SSD on SMART Error : Yes
Enable SSD Patrol Read : No
PR Correct Unconfigured Areas : Yes
Enable Spin Down of UnConfigured Drives : No
Disable Spin Down of hot spares : No
Spin Down time : 30
T10 Power State : No
Error Counters
================
Memory Correctable Errors : 0
Memory Uncorrectable Errors : 0
Cluster Information
================
Cluster Permitted : No
Cluster Active : No
Default Settings
================
Phy Polarity : 0
Phy PolaritySplit : 0
Background Rate : 30
Strip Size : 64kB
Flush Time : 4 seconds
Write Policy : WB
Read Policy : None
Cache When BBU Bad : Disabled
Cached IO : Yes
SMART Mode : Mode 6
Alarm Disable : No
Coercion Mode : 1GB
ZCR Config : Unknown
Dirty LED Shows Drive Activity : No
BIOS Continue on Error : 0
Spin Down Mode : None
Allowed Device Type : SAS/SATA Mix
Allow Mix in Enclosure : Yes
Allow HDD SAS/SATA Mix in VD : Yes
Allow SSD SAS/SATA Mix in VD : Yes
Allow HDD/SSD Mix in VD : No
Allow SATA in Cluster : No
Max Chained Enclosures : 16
Disable Ctrl-R : Yes
Enable Web BIOS : Yes
Direct PD Mapping : No
BIOS Enumerate VDs : Yes
Restore Hot Spare on Insertion : Yes
Expose Enclosure Devices : Yes
Maintain PD Fail History : Yes
Disable Puncturing : No
Zero Based Enclosure Enumeration : Yes
PreBoot CLI Enabled : Yes
LED Show Drive Activity : Yes
Cluster Disable : Yes
SAS Disable : No
Auto Detect BackPlane Enable : SGPIO/i2c SEP
Use FDE Only : Yes
Enable Led Header : Yes
Delay during POST : 0
EnableCrashDump : No
Disable Online Controller Reset : No
EnableLDBBM : No
Un-Certified Hard Disk Drives : Allow
Treat Single span R1E as R10 : No
Max LD per array : 16
Power Saving option : Don't Auto spin down Configured Drives
Max power savings option is not allowed for LDs. Only T10 power conditions are to be used.
Default spin down time in minutes: 30
Enable JBOD : No
TTY Log In Flash : No
Auto Enhanced Import : No
BreakMirror RAID Support : No
Disable Join Mirror : No
Enable Shield State : No
Time taken to detect CME : 60s
Exit Code: 0x00