Centos 7 无法增加分区,发现有重复的设备

Centos 7 无法增加分区,发现有重复的设备

我试图增加我们的一台服务器上的usr分区var,但是当我输入时出现此警告(见下图)pvs

后来当我尝试扩展分区时,它会抛出很多警告和错误

在此处输入图片描述

有什么办法可以解决这个问题吗?

lvs结果是:

WARNING: found device with duplicate /dev/md3
WARNING: found device with duplicate /dev/sdb3
WARNING: Disabling lvmetad cache which does not support PVs
WARNING: Scan found duplicate PVs
WARNING: Not using lvmetad because cache update failed
WARNING: Not suing device /dev/md3 for PV .....
WARNING: PV ... prefer device /dev/sda3 because of previous preference
WARNING: Device mismatch detected for vg00/urs with is accessing /dev/md3 instead of /dev/sda3, /dev/sda3
WARNING: Device mismatch detected for vg00/var with is accessing /dev/md3 instead of /dev/sda3, /dev/sda3
WARNING: Device mismatch detected for vg00/home with is accessing /dev/md3 instead of /dev/sda3
LV   VG    Attr       LSize
home vg00  -wi-ao---- 5GB
usr  vg00  -wi-ao---- 6GB
var  vg00  -wi-ao---- 105GB

df -h结果是:

Filesystem                  Mounted on
/dev/md1                    /
devtmpfs                    /dev 
tmpfs                       /dev/shm
tmpfs                       /run
tmpfs                       /sys/fs/cgroup
/dev/mapper/vg00-usr        /usr
none                        /tmp
/dev/mapper/vg00-home       /home
/dev/mapper/vg00-var        /var
tmpfs                       /run/user/10010

lvmdiskscan结果是:

WARNING: found device with duplicate /dev/md3
WARNING: found device with duplicate /dev/sdb3
WARNING: Disabling lvmetad cache which does not support PVs
WARNING: Scan found duplicate PVs
WARNING: Not using lvmetad because cache update failer
/dev/vg00/usr
/dev/md1
/dev/vg00/var
/dev/sda2
/dev/vg00/home
/dev/md3           LVM phisical volume
/dev/sdb2
3 disks
3 partitions
0 LVM phisical volume whole disks
1 LVM phisical volume

blkid结果

/dev/md1: LABEL="root" UUID="6edddd0e-a52c-45ff-8ece-24e93448a69e" TYPE="ext3" 
/dev/sdb1: UUID="e5096346-4290-310d-1f51-fb8978ee93fe" TYPE="linux_raid_member" 
/dev/mapper/vg00-usr: LABEL="usr" UUID="5a86bc5c-f160-4353-83cd-d44703842676" TYPE="ext4" 
/dev/sda3: UUID="a0045011-687b-f338-1f51-fb8978ee93fe" TYPE="linux_raid_member" 
/dev/sda2: UUID="6064f77c-72bc-42f9-9dfe-584ec9d74385" TYPE="swap" 
/dev/sdb2: UUID="bf72d033-bc14-4780-b19f-d2f87ef40b7c" TYPE="swap" 
/dev/sda1: UUID="e5096346-4290-310d-1f51-fb8978ee93fe" TYPE="linux_raid_member" 
/dev/sdb3: UUID="a0045011-687b-f338-1f51-fb8978ee93fe" TYPE="linux_raid_member" 
/dev/md3: UUID="WofUlL-4B5d-Lt97-R4ml-fj7f-kzch-IWcfLn" TYPE="LVM2_member" 
/dev/mapper/vg00-var: LABEL="var" UUID="3c9e5ddf-6933-40a0-b8d4-a6f877f8c228" TYPE="ext4" 
/dev/mapper/vg00-home: LABEL="home" UUID="902855cd-8f75-4241-8307-f8f4aa43fb0d" TYPE="ext4"

答案1

最后我联系了我的提供商,因为安装映像本身来自他们,他们告诉我这是某些 Centos 7 发行版的问题。

以下是他们修复方法:

首先,我备份了您的 lvm.conf 文件:

# cp /etc/lvm/lvm.conf /etc/lvm/lvm.conf.bak

我们编辑了配置文件以正确过滤

# vi /etc/lvm/lvm.conf

filter = [ "a|/dev/md.*|", "r/.*/" ]

然后我运行vgscanpvscan确认问题已解决。

建议您在执行 LVM 之前重新启动服务器。

相关内容