Dell Poweredge R710“需要系统服务更新”

Dell Poweredge R710“需要系统服务更新”

我们刚买了一台翻新的 R710,在尝试启动系统服务时,系统提示系统服务已禁用,因此我们启动了 iDRAC6 配置实用程序并启用了系统服务。现在,当我们尝试重新启动并再次进入系统服务时,系统提示“需要更新系统服务”,据我所知,更新固件的唯一方法是使用系统服务中的实用程序。我们该怎么做?我相信有一种方法可以通过操作系统来实现,但这是我们的最后手段,因为我们没有 USB 驱动器来放置操作系统映像。

答案1

您可以直接通过 iDRAC 更新单个组件固件。

iDRAC6 比较旧,但是它似乎支持这样做。

请参阅该文档的分步说明;Dell PowerEdge:使用 iDRAC 远程更新单个系统组件的固件

有关 iDRAC8+ 的信息看起来是这样的;

Go to Overview > iDRAC Settings > Update and Rollback. The Firmware Update page is displayed.

On the Update tab, select Local as the File Location.

Click Browse, select the firmware image file for the required component, and then click Upload.

After the upload is complete, the Update Details section displays each firmware file that is uploaded to iDRAC and its status.
If the firmware image file is valid and was successfully uploaded, the Contents column displays a (+) icon next to the firmware image file name. Expand the name to view the Device Name, Current, and Available firmware version information.

Select the required firmware file and do one of the following:

    For firmware images that do not require a host system reboot, click Install. For example, iDRAC firmware file.

    For firmware images that require a host system reboot, click Install and Reboot or Install Next Reboot.

    To cancel the firmware update, click Cancel.

When you click Install, Install and Reboot, or Install Next Reboot, the message "Updating Job Queue" is displayed.

Click Job Queue to display the Job Queue page, where you can view and manage your pending firmware updates. You can also click OK to refresh the current page and view the status of the firmware update.

对于 iDRAC6,官方文档链接至视频

相关内容