今天,我不得不拆卸并重建一个服务器风扇来修复它。启动服务器后,我遇到了一个问题,即所有磁盘都不在它们昨天所在的位置。因此系统无法安装我的阵列。现在所有磁盘都具有与以前相同的旧路径...但我的系统无法在启动时安装它们,并显示错误“无法读取超级块”,我对 raid 配置不太熟悉。这就是为什么我总是害怕运行错误的命令并擦除所有磁盘。
这就是我要问的原因,将超级块清零并重新创建“新的” raid5 阵列是否安全?
cat /proc/mdstat
Personalities :
md127 : inactive sda[0](S) sdb[1](S) sdd[4](S) sdc[2](S)
7813529952 blocks super 1.2
unused devices: <none>
我尝试了以下操作:
# mdadm --stop /dev/md127
mdadm: stopped /dev/md127
# mdadm --assemble --scan -v
mdadm: /dev/sdc is identified as a member of /dev/md/vo1, slot 2.
mdadm: /dev/sdd is identified as a member of /dev/md/vo1, slot 3.
mdadm: /dev/sdb is identified as a member of /dev/md/vo1, slot 1.
mdadm: /dev/sda is identified as a member of /dev/md/vo1, slot 0.
mdadm: added /dev/sda to /dev/md/vo1 as 0 (possibly out of date)
mdadm: added /dev/sdb to /dev/md/vo1 as 1 (possibly out of date)
mdadm: added /dev/sdd to /dev/md/vo1 as 3
mdadm: added /dev/sdc to /dev/md/vo1 as 2
mdadm: /dev/md/vo1 assembled from 2 drives - not enough to start the array.
详细信息显示它已设置 Raid0 而不是 Raid5。
# mdadm --detail /dev/md127
/dev/md127:
Version : 1.2
Raid Level : raid0
Total Devices : 4
Persistence : Superblock is persistent
State : inactive
Working Devices : 4
Name : ncloud:vo1 (local to host ncloud)
UUID : b8ecad1a:56e6c31c:35bb6532:3dd2f9c7
Events : 5102
Number Major Minor RaidDevice
- 8 32 - /dev/sdc
- 8 0 - /dev/sda
- 8 48 - /dev/sdd
- 8 16 - /dev/sdb
有 2 个磁盘,各有 1 个缺失状态。
编辑#2
root@ncloud:~# mdadm --examine /dev/sd[abcd]
/dev/sda:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : b8ecad1a:56e6c31c:35bb6532:3dd2f9c7
Name : ncloud:vo1 (local to host ncloud)
Creation Time : Wed Dec 9 13:01:02 2020
Raid Level : raid5
Raid Devices : 4
Avail Dev Size : 3906764976 (1862.89 GiB 2000.26 GB)
Array Size : 5860147200 (5588.67 GiB 6000.79 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 264192 sectors
Super Offset : 8 sectors
Unused Space : before=264112 sectors, after=176 sectors
State : clean
Device UUID : c0e60330:de836b95:5dd932a0:fe90c3dd
Internal Bitmap : 8 sectors from superblock
Update Time : Mon Aug 23 00:45:53 2021
Bad Block Log : 512 entries available at offset 16 sectors
Checksum : 96c1485f - correct
Events : 5102
Layout : left-symmetric
Chunk Size : 128K
Device Role : Active device 0
Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdb:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : b8ecad1a:56e6c31c:35bb6532:3dd2f9c7
Name : ncloud:vo1 (local to host ncloud)
Creation Time : Wed Dec 9 13:01:02 2020
Raid Level : raid5
Raid Devices : 4
Avail Dev Size : 3906764976 (1862.89 GiB 2000.26 GB)
Array Size : 5860147200 (5588.67 GiB 6000.79 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 264192 sectors
Super Offset : 8 sectors
Unused Space : before=264112 sectors, after=176 sectors
State : clean
Device UUID : 27b3f2cd:ca5d1594:625c4478:48e2a2d6
Internal Bitmap : 8 sectors from superblock
Update Time : Mon Aug 23 00:45:53 2021
Bad Block Log : 512 entries available at offset 16 sectors
Checksum : 44ac303 - correct
Events : 5102
Layout : left-symmetric
Chunk Size : 128K
Device Role : Active device 1
Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdc:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : b8ecad1a:56e6c31c:35bb6532:3dd2f9c7
Name : ncloud:vo1 (local to host ncloud)
Creation Time : Wed Dec 9 13:01:02 2020
Raid Level : raid5
Raid Devices : 4
Avail Dev Size : 3906764976 (1862.89 GiB 2000.26 GB)
Array Size : 5860147200 (5588.67 GiB 6000.79 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 264192 sectors
Super Offset : 8 sectors
Unused Space : before=264112 sectors, after=176 sectors
State : clean
Device UUID : 5e2a55e9:81dce8d4:8e4f5dce:e270f7a5
Internal Bitmap : 8 sectors from superblock
Update Time : Mon Aug 23 09:48:16 2021
Bad Block Log : 512 entries available at offset 16 sectors
Checksum : 85efb9d6 - correct
Events : 5102
Layout : left-symmetric
Chunk Size : 128K
Device Role : Active device 2
Array State : .AAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdd:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : b8ecad1a:56e6c31c:35bb6532:3dd2f9c7
Name : ncloud:vo1 (local to host ncloud)
Creation Time : Wed Dec 9 13:01:02 2020
Raid Level : raid5
Raid Devices : 4
Avail Dev Size : 3906764976 (1862.89 GiB 2000.26 GB)
Array Size : 5860147200 (5588.67 GiB 6000.79 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 264192 sectors
Super Offset : 8 sectors
Unused Space : before=264112 sectors, after=176 sectors
State : clean
Device UUID : 22630b19:7930354b:7e3784a8:4f7396b7
Internal Bitmap : 8 sectors from superblock
Update Time : Mon Aug 23 09:48:16 2021
Bad Block Log : 512 entries available at offset 16 sectors
Checksum : 17b830f0 - correct
Events : 5102
Layout : left-symmetric
Chunk Size : 128K
Device Role : Active device 3
Array State : .AAA ('A' == active, '.' == missing, 'R' == replacing)
编辑#3
OK root@ncloud:~# mdadm --stop /dev/md127
mdadm: stopped /dev/md127
OK root@ncloud:~# mdadm --assemble --force /dev/md127 /dev/sd[abcd]
mdadm: /dev/md127 has been started with 4 drives.
OK root@ncloud:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md127 : active (auto-read-only) raid5 sda[0] sdd[4] sdc[2] sdb[1]
5860147200 blocks super 1.2 level 5, 128k chunk, algorithm 2 [4/4] [UUUU]
bitmap: 0/15 pages [0KB], 65536KB chunk
unused devices: <none>
root@ncloud:~# mdadm --detail /dev/md127
/dev/md127:
Version : 1.2
Creation Time : Wed Dec 9 13:01:02 2020
Raid Level : raid5
Array Size : 5860147200 (5588.67 GiB 6000.79 GB)
Used Dev Size : 1953382400 (1862.89 GiB 2000.26 GB)
Raid Devices : 4
Total Devices : 4
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Mon Aug 23 00:45:53 2021
State : clean
Active Devices : 4
Working Devices : 4
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 128K
Consistency Policy : bitmap
Name : ncloud:vo1 (local to host ncloud)
UUID : b8ecad1a:56e6c31c:35bb6532:3dd2f9c7
Events : 5102
Number Major Minor RaidDevice State
0 8 0 0 active sync /dev/sda
1 8 16 1 active sync /dev/sdb
2 8 32 2 active sync /dev/sdc
4 8 48 3 active sync /dev/sdd
编辑4
将详细信息扫描到 mdadm.conf 后,取消注释 fstab 中的行(阵列的 UUID 相同),然后更新 initramfs -u 并重新启动。我在 dmesg 中看到以下内容:
Error root@ncloud:~# dmesg | grep block
[ 11.326178] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 11.328529] sd 0:0:0:1: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 12.198036] sd 1:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 12.200996] sd 1:0:0:1: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 144.497538] EXT4-fs (md127): unable to read superblock
Personalities :
md127 : inactive sdd[4](S) sdc[2](S) sda[0](S) sdb[1](S)
7813529952 blocks super 1.2
unused devices: <none>
编辑 5 DMESG
我刚刚启动了系统,但硬盘都没有启动。我睡觉前总是关闭系统。
[ 44.331998] sd 0:0:0:1: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 44.332253] sd 0:0:0:1: [sdb] Write Protect is off
[ 44.332262] sd 0:0:0:1: [sdb] Mode Sense: 67 00 10 08
[ 44.333022] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 44.333748] sd 0:0:0:1: [sdb] Optimal transfer size 33553920 bytes
[ 44.335655] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 44.335907] sd 0:0:0:0: [sda] Write Protect is off
[ 44.335916] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08
[ 44.336385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 44.337327] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[ 44.574978] usb 2-2: USB disconnect, device number 15
[ 44.635129] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.635152] sd 0:0:0:0: [sda] Sense not available.
[ 44.635234] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.635253] sd 0:0:0:0: [sda] Sense not available.
[ 44.635322] sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[ 44.635366] sd 0:0:0:0: [sda] Write Protect is on
[ 44.635386] sd 0:0:0:0: [sda] Mode Sense: 5c 10 8b c4
[ 44.636524] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.636544] sd 0:0:0:0: [sda] Sense not available.
[ 44.636625] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.636643] sd 0:0:0:0: [sda] Sense not available.
[ 44.636865] sd 0:0:0:0: [sda] Attached SCSI disk
[ 44.815456] sd 0:0:0:1: [sdb] Read Capacity(16) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.815467] sd 0:0:0:1: [sdb] Sense not available.
[ 44.815500] sd 0:0:0:1: [sdb] Read Capacity(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.815507] sd 0:0:0:1: [sdb] Sense not available.
[ 44.815535] sd 0:0:0:1: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[ 44.816034] sd 0:0:0:1: [sdb] Read Capacity(16) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.816042] sd 0:0:0:1: [sdb] Sense not available.
[ 44.816075] sd 0:0:0:1: [sdb] Read Capacity(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 44.816082] sd 0:0:0:1: [sdb] Sense not available.
[ 44.816132] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 46.625314] usb 2-2: Device not responding to setup address.
[ 46.845292] usb 2-2: Device not responding to setup address.
[ 47.064953] usb 2-2: device not accepting address 16, error -71
[ 47.295335] usb 2-2: Device not responding to setup address.
[ 47.515295] usb 2-2: Device not responding to setup address.
[ 47.734964] usb 2-2: device not accepting address 17, error -71
[ 47.743443] usb usb2-port2: attempt power cycle
[ 48.505310] usb 2-2: Device not responding to setup address.
[ 48.725233] usb 2-2: Device not responding to setup address.
[ 48.944928] usb 2-2: device not accepting address 18, error -71
[ 49.175256] usb 2-2: Device not responding to setup address.
[ 49.395303] usb 2-2: Device not responding to setup address.
[ 49.614958] usb 2-2: device not accepting address 19, error -71
[ 49.623420] usb usb2-port2: unable to enumerate USB device
[ 63.844995] usb 1-1.1: new high-speed USB device number 4 using xhci_hcd
[ 64.054967] usb 2-1: USB disconnect, device number 3
[ 64.068262] sd 1:0:0:0: [sdc] Synchronizing SCSI cache
[ 64.685012] sd 1:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 64.767524] sd 1:0:0:1: [sdd] Synchronizing SCSI cache
[ 65.365009] sd 1:0:0:1: [sdd] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 65.755417] usb 2-1: Device not responding to setup address.
[ 65.975280] usb 2-1: Device not responding to setup address.
[ 66.194952] usb 2-1: device not accepting address 20, error -71
[ 66.425315] usb 2-1: Device not responding to setup address.
[ 66.645324] usb 2-1: Device not responding to setup address.
[ 66.864943] usb 2-1: device not accepting address 21, error -71
[ 66.873409] usb usb2-port1: attempt power cycle
[ 67.645288] usb 2-1: Device not responding to setup address.
[ 67.865275] usb 2-1: Device not responding to setup address.
[ 68.084979] usb 2-1: device not accepting address 22, error -71
[ 68.315282] usb 2-1: Device not responding to setup address.
[ 68.535306] usb 2-1: Device not responding to setup address.
[ 68.754993] usb 2-1: device not accepting address 23, error -71
[ 68.763463] usb usb2-port1: unable to enumerate USB device
[ 267.345137] usb 2-2: Device not responding to setup address.
[ 267.565113] usb 2-2: Device not responding to setup address.
[ 267.784800] usb 2-2: device not accepting address 24, error -71
[ 268.895181] usb 2-2: Device not responding to setup address.
[ 269.115322] usb 2-2: Device not responding to setup address.
[ 269.334860] usb 2-2: device not accepting address 25, error -71
[ 269.335263] usb usb2-port2: attempt power cycle
[ 270.545312] usb 2-2: Device not responding to setup address.
[ 270.765244] usb 2-2: Device not responding to setup address.
[ 270.984922] usb 2-2: device not accepting address 26, error -71
[ 271.215265] usb 2-2: Device not responding to setup address.
[ 271.435271] usb 2-2: Device not responding to setup address.
[ 271.654947] usb 2-2: device not accepting address 27, error -71
[ 271.655343] usb usb2-port2: unable to enumerate USB device
[ 272.085001] usb 1-1.1: new high-speed USB device number 5 using xhci_hcd
[ 273.145469] usb 2-2: Device not responding to setup address.
[ 273.365365] usb 2-2: Device not responding to setup address.
[ 273.585013] usb 2-2: device not accepting address 28, error -71
[ 273.815367] usb 2-2: Device not responding to setup address.
[ 274.035413] usb 2-2: Device not responding to setup address.
[ 274.255037] usb 2-2: device not accepting address 29, error -71
[ 274.263447] usb usb2-port2: attempt power cycle
[ 275.025412] usb 2-2: Device not responding to setup address.
[ 275.245477] usb 2-2: Device not responding to setup address.
[ 275.465093] usb 2-2: device not accepting address 30, error -71
[ 275.695434] usb 2-2: Device not responding to setup address.
[ 275.915439] usb 2-2: Device not responding to setup address.
[ 276.135142] usb 2-2: device not accepting address 31, error -71
[ 276.143608] usb usb2-port2: unable to enumerate USB device
[ 277.225494] usb 2-1: Device not responding to setup address.
[ 277.445492] usb 2-1: Device not responding to setup address.
[ 277.665166] usb 2-1: device not accepting address 32, error -71
[ 278.705210] usb 1-1.1: new high-speed USB device number 6 using xhci_hcd
[ 279.875710] usb 2-1: Device not responding to setup address.
[ 280.095620] usb 2-1: Device not responding to setup address.
[ 280.315260] usb 2-1: device not accepting address 34, error -71
[ 280.545634] usb 2-1: Device not responding to setup address.
[ 280.765611] usb 2-1: Device not responding to setup address.
[ 280.985280] usb 2-1: device not accepting address 35, error -71
[ 280.993740] usb usb2-port1: attempt power cycle
[ 281.755646] usb 2-1: Device not responding to setup address.
[ 281.975646] usb 2-1: Device not responding to setup address.
[ 282.195368] usb 2-1: device not accepting address 36, error -71
[ 282.425667] usb 2-1: Device not responding to setup address.
[ 282.645665] usb 2-1: Device not responding to setup address.
[ 282.865366] usb 2-1: device not accepting address 37, error -71
[ 282.873826] usb usb2-port1: unable to enumerate USB device
[ 283.105694] usb 2-2: Device not responding to setup address.
[ 283.325685] usb 2-2: Device not responding to setup address.
[ 283.545360] usb 2-2: device not accepting address 38, error -71
[ 283.775712] usb 2-2: Device not responding to setup address.
[ 283.995714] usb 2-2: Device not responding to setup address.
[ 284.215384] usb 2-2: device not accepting address 39, error -71
[ 284.223859] usb usb2-port2: attempt power cycle
[ 284.985762] usb 2-2: Device not responding to setup address.
[ 285.205835] usb 2-2: Device not responding to setup address.
[ 285.425431] usb 2-2: device not accepting address 40, error -71
[ 285.655770] usb 2-2: Device not responding to setup address.
[ 285.875801] usb 2-2: Device not responding to setup address.
[ 286.095503] usb 2-2: device not accepting address 41, error -71
[ 286.103979] usb usb2-port2: unable to enumerate USB device
编辑6
对我来说,dmesg 的错误似乎是我的 pi 电源有问题。我有一个带 Rock-Pi SATA 头的 Allnet NAS。它将通过 USB-C 由 45W 电源供电。HDD 本身通过 Raspberry 上的 SATA 和 GPIO 端口连接,但 HDD 还通过 PI4 板到 Rock-Pi SATA 端口的 USB3<->USB3 端口连接连接。我拔掉了它。启动系统,并在启动后重新添加 USB3 端口。此后,dmesg 没有显示读取错误。它似乎很好,因为什么都没有发生......真的很奇怪。
答案1
有一个几乎相同的问题和帖子https://superuser.com/a/811116/250231
在开始之前验证要使用哪些驱动器,要么全部使用,要么使用一个缺失的驱动器以便稍后重建。最后,--assemble --force
重要的是确保顺序正确。
根据最新--examine
数据,您应该能够:
mdadm --stop /dev/md127
mdadm --assemble --force /dev/md127 /dev/sd[abcd]
cat /proc/mdstat
a
和可能首先断开连接,并且该信息在和b
更新,所以这就是您遇到此问题的原因。我再一次强调,您应该尝试了解它们断开连接的原因,并且日志显示了这一点,如果驱动器断开连接,请在重新启动之前获取该数据。(可能是电源或连接器不稳定。)c
d
dmesg
如果您准备丢失数据,则只能使用零超级块。
答案2
将所有磁盘恢复正常状态后,我组装并检查了 dmesg。我该如何继续?
[ 637.106944] md: md127 stopped.
[ 639.456955] md: md127 stopped.
[ 639.674450] raid6: neonx8 gen() 2838 MB/s
[ 639.844453] raid6: neonx8 xor() 2332 MB/s
[ 640.014457] raid6: neonx4 gen() 3976 MB/s
[ 640.184458] raid6: neonx4 xor() 2457 MB/s
[ 640.354461] raid6: neonx2 gen() 3801 MB/s
[ 640.524464] raid6: neonx2 xor() 2767 MB/s
[ 640.694468] raid6: neonx1 gen() 2919 MB/s
[ 640.864470] raid6: neonx1 xor() 2377 MB/s
[ 641.034474] raid6: int32x8 gen() 953 MB/s
[ 641.204484] raid6: int32x8 xor() 562 MB/s
[ 641.374493] raid6: int32x4 gen() 959 MB/s
[ 641.544499] raid6: int32x4 xor() 652 MB/s
[ 641.714492] raid6: int32x2 gen() 1047 MB/s
[ 641.884488] raid6: int32x2 xor() 587 MB/s
[ 642.054510] raid6: int32x1 gen() 951 MB/s
[ 642.224503] raid6: int32x1 xor() 485 MB/s
[ 642.224510] raid6: using algorithm neonx4 gen() 3976 MB/s
[ 642.224516] raid6: .... xor() 2457 MB/s, rmw enabled
[ 642.224523] raid6: using neon recovery algorithm
[ 642.232248] xor: measuring software checksum speed
[ 642.234908] arm4regs : 3775 MB/sec
[ 642.238331] 8regs : 2877 MB/sec
[ 642.241769] 32regs : 2865 MB/sec
[ 642.243454] neon : 5860 MB/sec
[ 642.243460] xor: using function: neon (5860 MB/sec)
[ 642.246566] async_tx: api initialized (async)
[ 642.265239] md/raid:md127: device sdc operational as raid disk 0
[ 642.265250] md/raid:md127: device sdb operational as raid disk 3
[ 642.265257] md/raid:md127: device sda operational as raid disk 2
[ 642.265263] md/raid:md127: device sdd operational as raid disk 1
[ 642.268157] md/raid:md127: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 642.290815] md127: detected capacity change from 0 to 6000790732800
[ 643.066768] sd 0:0:0:0: [sda] tag#3 data cmplt err -75 uas-tag 2 inflight: CMD
[ 643.066788] sd 0:0:0:0: [sda] tag#3 CDB: opcode=0x28 28 00 e8 e0 87 78 00 00 80 00
OK root@ncloud:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md127 : active (auto-read-only) raid5 sdc[0] sdb[4] sda[2] sdd[1]
5860147200 blocks super 1.2 level 5, 128k chunk, algorithm 2 [4/4] [UUUU]
bitmap: 0/15 pages [0KB], 65536KB chunk
unused devices: <none>
嗯...我认为我的设备不知为何放弃了:
[ 1261.323761] xhci_hcd 0000:01:00.0: WARNING: Host System Error
[ 1261.355783] xhci_hcd 0000:01:00.0: Host halt failed, -110
[ 1266.335275] xhci_hcd 0000:01:00.0: xHCI host not responding to stop endpoint command.
[ 1266.335291] xhci_hcd 0000:01:00.0: USBSTS: HSE EINT
[ 1266.367308] xhci_hcd 0000:01:00.0: Host halt failed, -110
[ 1266.367318] xhci_hcd 0000:01:00.0: xHCI host controller not responding, assume dead
[ 1266.367375] xhci_hcd 0000:01:00.0: HC died; cleaning up
[ 1266.367432] xhci_hcd 0000:01:00.0: xHCI host not responding to stop endpoint command.
[ 1266.367442] xhci_hcd 0000:01:00.0: USBSTS: HSE EINT
[ 1266.399457] xhci_hcd 0000:01:00.0: Host halt failed, -110
[ 1266.399525] usb 1-1: USB disconnect, device number 2
[ 1266.400418] usb 2-1: cmd cmplt err -108
[ 1266.400441] usb 2-1: cmd cmplt err -108
[ 1266.400460] usb 2-1: cmd cmplt err -108
[ 1266.400555] usb 2-2: cmd cmplt err -108
[ 1266.400574] usb 2-2: cmd cmplt err -108
[ 1266.400592] usb 2-2: cmd cmplt err -108
[ 1266.401506] usb 2-1: USB disconnect, device number 2
[ 1266.401952] sd 0:0:0:1: [sdb] tag#8 uas_zap_pending 0 uas-tag 4 inflight: CMD
[ 1266.401968] sd 0:0:0:1: [sdb] tag#8 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1266.401987] sd 0:0:0:0: [sda] tag#10 uas_zap_pending 0 uas-tag 5 inflight: CMD
[ 1266.401998] sd 0:0:0:0: [sda] tag#10 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1266.402035] sd 0:0:0:1: [sdb] tag#8 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 cmd_age=35s
[ 1266.402056] sd 0:0:0:1: [sdb] tag#8 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1266.402088] blk_update_request: I/O error, dev sdb, sector 16 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
[ 1266.402104] md: super_written gets error=-5
[ 1266.402121] md/raid:md127: Disk failure on sdb, disabling device.
md/raid:md127: Operation continuing on 3 devices.
[ 1266.403346] sd 0:0:0:0: [sda] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 cmd_age=35s
[ 1266.403368] sd 0:0:0:0: [sda] tag#10 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1266.403396] blk_update_request: I/O error, dev sda, sector 16 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
[ 1266.403406] md: super_written gets error=-5
[ 1266.403465] blk_update_request: I/O error, dev sda, sector 16 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
[ 1266.403474] md: super_written gets error=-5
[ 1266.404016] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1266.445374] scsi host0: uas_eh_device_reset_handler FAILED to get lock err -19
[ 1266.445396] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 1266.445412] sd 0:0:0:1: Device offlined - not ready after error recovery
[ 1266.445426] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 1266.445439] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 1266.445500] sd 0:0:0:1: [sdb] tag#9 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06 cmd_age=39s
[ 1266.445518] sd 0:0:0:1: [sdb] tag#9 CDB: opcode=0x28 28 00 08 ce c2 00 00 00 78 00
[ 1266.445538] blk_update_request: I/O error, dev sdb, sector 147767808 op 0x0:(READ) flags 0x0 phys_seg 15 prio class 0
[ 1266.445557] md/raid:md127: read error not correctable (sector 147767808 on sdb).
[ 1266.445576] md/raid:md127: read error not correctable (sector 147767816 on sdb).
[ 1266.445591] md/raid:md127: read error not correctable (sector 147767824 on sdb).
[ 1266.445607] md/raid:md127: read error not correctable (sector 147767832 on sdb).
[ 1266.445621] md/raid:md127: read error not correctable (sector 147767840 on sdb).
[ 1266.445636] md/raid:md127: read error not correctable (sector 147767848 on sdb).
[ 1266.445651] md/raid:md127: read error not correctable (sector 147767856 on sdb).
[ 1266.445665] md/raid:md127: read error not correctable (sector 147767864 on sdb).
[ 1266.445680] md/raid:md127: read error not correctable (sector 147767872 on sdb).
[ 1266.445695] md/raid:md127: read error not correctable (sector 147767880 on sdb).
[ 1266.495304] blk_update_request: I/O error, dev sda, sector 1138330192 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 1266.495337] blk_update_request: I/O error, dev sda, sector 147766592 op 0x1:(WRITE) flags 0x0 phys_seg 24 prio class 0
[ 1266.495378] blk_update_request: I/O error, dev sda, sector 1953499288 op 0x0:(READ) flags 0x0 phys_seg 5 prio class 0
[ 1267.005311] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 1267.088166] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[ 1267.695405] sd 0:0:0:1: [sdb] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 1267.736689] xhci_hcd 0000:01:00.0: WARN Can't disable streams for endpoint 0x82, streams are being disabled already
[ 1267.740901] usb 2-2: USB disconnect, device number 3
[ 1267.741459] sd 1:0:0:0: [sdc] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 1267.741479] sd 1:0:0:0: [sdc] tag#2 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1267.741502] sd 1:0:0:1: [sdd] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
[ 1267.741517] sd 1:0:0:1: [sdd] tag#3 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1267.741545] sd 1:0:0:0: [sdc] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 cmd_age=36s
[ 1267.741598] sd 1:0:0:0: [sdc] tag#2 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1267.741642] blk_update_request: I/O error, dev sdc, sector 16 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
[ 1267.741656] md: super_written gets error=-5
[ 1267.741764] blk_update_request: I/O error, dev sdc, sector 16 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
[ 1267.741777] md: super_written gets error=-5
[ 1267.741846] sd 1:0:0:1: [sdd] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 cmd_age=36s
[ 1267.741868] sd 1:0:0:1: [sdd] tag#3 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1267.741896] blk_update_request: I/O error, dev sdd, sector 16 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
[ 1267.741908] md: super_written gets error=-5
[ 1267.742000] scsi host1: uas_eh_device_reset_handler FAILED to get lock err -19
[ 1267.742024] sd 1:0:0:1: Device offlined - not ready after error recovery
[ 1267.742062] sd 1:0:0:1: [sdd] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06 cmd_age=36s
[ 1267.742084] sd 1:0:0:1: [sdd] tag#4 CDB: opcode=0x28 28 00 74 70 08 98 00 00 28 00
[ 1267.742166] sd 1:0:0:1: rejecting I/O to offline device
[ 1267.742185] md: super_written gets error=-5
[ 1267.742283] md: super_written gets error=-5
[ 1267.742353] md: super_written gets error=-5
[ 1267.742382] md: super_written gets error=-5
[ 1267.757485] sd 1:0:0:0: [sdc] Synchronizing SCSI cache
[ 1267.806312] md: super_written gets error=-5
[ 1267.806373] md: super_written gets error=-5
[ 1267.825329] md: super_written gets error=-5
[ 1267.825431] md: super_written gets error=-5
[ 1267.825456] md: super_written gets error=-5
[ 1267.825510] md: super_written gets error=-5
[ 1267.855320] md: super_written gets error=-5
[ 1267.855592] md: super_written gets error=-5
[ 1267.855637] md: super_written gets error=-5
[ 1267.885335] md: super_written gets error=-5
[ 1267.885475] md: super_written gets error=-5
[ 1267.885510] md: super_written gets error=-5
[ 1267.885571] md: super_written gets error=-5
[ 1267.905381] md: super_written gets error=-5
[ 1267.905906] md: super_written gets error=-5
[ 1267.905969] md: super_written gets error=-5
[ 1267.925341] md: super_written gets error=-5
[ 1267.925477] md: super_written gets error=-5
[ 1267.925511] md: super_written gets error=-5
[ 1267.925569] md: super_written gets error=-5
[ 1267.945376] md: super_written gets error=-5
[ 1267.945742] md: super_written gets error=-5
[ 1267.945805] md: super_written gets error=-5
[ 1267.975338] md: super_written gets error=-5
[ 1267.975477] md: super_written gets error=-5
[ 1267.975512] md: super_written gets error=-5
[ 1267.975572] md: super_written gets error=-5
[ 1267.995380] md: super_written gets error=-5
[ 1267.995742] md: super_written gets error=-5
[ 1267.995806] md: super_written gets error=-5
[ 1268.015354] md: super_written gets error=-5
[ 1268.015490] md: super_written gets error=-5
[ 1268.015544] md: super_written gets error=-5
[ 1268.015580] md: super_written gets error=-5
[ 1268.015638] md: super_written gets error=-5
[ 1268.015891] md: super_written gets error=-5
[ 1268.015953] md: super_written gets error=-5
[ 1268.035346] md: super_written gets error=-5
[ 1268.035483] md: super_written gets error=-5
[ 1268.035518] md: super_written gets error=-5
[ 1268.035575] md: super_written gets error=-5
[ 1268.055344] md: super_written gets error=-5
[ 1268.055492] md: super_written gets error=-5
[ 1268.055555] md: super_written gets error=-5
[ 1268.085342] md: super_written gets error=-5
[ 1268.085479] md: super_written gets error=-5
[ 1268.085544] md: super_written gets error=-5
[ 1268.085623] md: super_written gets error=-5
[ 1268.115336] md: super_written gets error=-5
[ 1268.115611] EXT4-fs error (device md127): __ext4_find_entry:1536: inode #53346523: comm php: reading directory lblock 0
[ 1268.115747] md: super_written gets error=-5
[ 1268.115812] md: super_written gets error=-5
[ 1268.135385] md: super_written gets error=-5
[ 1268.135514] md: super_written gets error=-5
[ 1268.135552] md: super_written gets error=-5
[ 1268.135615] sd 1:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 1268.135620] md: super_written gets error=-5
[ 1268.135645] md: super_written gets error=-5
[ 1268.135780] scsi 1:0:0:0: rejecting I/O to dead device
[ 1268.135799] md: super_written gets error=-5
[ 1268.135854] md: super_written gets error=-5
[ 1268.135919] md: super_written gets error=-5
[ 1268.135975] md: super_written gets error=-5
[ 1268.136010] md: super_written gets error=-5
[ 1268.136068] md: super_written gets error=-5
[ 1268.136152] md: super_written gets error=-5
[ 1268.136352] md: super_written gets error=-5
[ 1268.136383] md: super_written gets error=-5
[ 1268.136451] md: super_written gets error=-5
[ 1268.136520] md: super_written gets error=-5
[ 1268.136557] md: super_written gets error=-5
[ 1268.136590] md: super_written gets error=-5
[ 1268.136647] md: super_written gets error=-5
[ 1268.136770] md: super_written gets error=-5
[ 1268.136801] md: super_written gets error=-5
[ 1268.136860] md: super_written gets error=-5
[ 1268.137806] md: super_written gets error=-5
[ 1268.137838] md: super_written gets error=-5
[ 1268.137900] md: super_written gets error=-5
[ 1268.137963] md: super_written gets error=-5
[ 1268.137998] md: super_written gets error=-5
[ 1268.138029] md: super_written gets error=-5
[ 1268.138085] md: super_written gets error=-5
[ 1268.138350] md: super_written gets error=-5
[ 1268.138381] md: super_written gets error=-5
[ 1268.138440] md: super_written gets error=-5
[ 1268.138504] md: super_written gets error=-5
[ 1268.138539] md: super_written gets error=-5
[ 1268.138569] md: super_written gets error=-5
[ 1268.138625] md: super_written gets error=-5
[ 1268.138801] md: super_written gets error=-5
[ 1268.138832] md: super_written gets error=-5
[ 1268.138889] md: super_written gets error=-5
[ 1268.138952] md: super_written gets error=-5
[ 1268.138988] md: super_written gets error=-5
[ 1268.139018] md: super_written gets error=-5
[ 1268.139074] md: super_written gets error=-5
[ 1268.139317] md: super_written gets error=-5
[ 1268.139349] md: super_written gets error=-5
[ 1268.139407] md: super_written gets error=-5
[ 1268.139473] md: super_written gets error=-5
[ 1268.139508] md: super_written gets error=-5
[ 1268.139538] md: super_written gets error=-5
[ 1268.139594] md: super_written gets error=-5
[ 1268.139771] md: super_written gets error=-5
[ 1268.139803] md: super_written gets error=-5
[ 1268.139860] md: super_written gets error=-5
[ 1268.139923] md: super_written gets error=-5
[ 1268.139958] md: super_written gets error=-5
[ 1268.139988] md: super_written gets error=-5
[ 1268.140047] md: super_written gets error=-5
[ 1268.140217] md: super_written gets error=-5
[ 1268.140248] md: super_written gets error=-5
[ 1268.140308] md: super_written gets error=-5
[ 1268.140371] md: super_written gets error=-5
[ 1268.140406] md: super_written gets error=-5
[ 1268.140436] md: super_written gets error=-5
[ 1268.140492] md: super_written gets error=-5
[ 1268.140658] md: super_written gets error=-5
[ 1268.140689] md: super_written gets error=-5
[ 1268.140744] md: super_written gets error=-5
[ 1268.140806] md: super_written gets error=-5
[ 1268.140841] md: super_written gets error=-5
[ 1268.140871] md: super_written gets error=-5
[ 1268.140929] md: super_written gets error=-5
[ 1268.141094] md: super_written gets error=-5
[ 1268.141126] md: super_written gets error=-5
[ 1268.141181] md: super_written gets error=-5
[ 1268.141243] md: super_written gets error=-5
[ 1268.141301] md: super_written gets error=-5
[ 1268.141358] md: super_written gets error=-5
[ 1268.141443] md: super_written gets error=-5
[ 1268.141648] md: super_written gets error=-5
[ 1268.141708] md: super_written gets error=-5
[ 1268.141792] md: super_written gets error=-5
[ 1268.141844] md: super_written gets error=-5
[ 1268.141903] md: super_written gets error=-5
[ 1268.141962] md: super_written gets error=-5
[ 1268.142048] md: super_written gets error=-5
[ 1268.142251] md: super_written gets error=-5
[ 1268.142311] md: super_written gets error=-5
[ 1268.142395] md: super_written gets error=-5
[ 1268.142448] md: super_written gets error=-5
[ 1268.142505] md: super_written gets error=-5
[ 1268.142563] md: super_written gets error=-5
[ 1268.142644] md: super_written gets error=-5
[ 1268.142878] md: super_written gets error=-5
[ 1268.142937] md: super_written gets error=-5
[ 1268.143019] md: super_written gets error=-5
[ 1268.143070] md: super_written gets error=-5
[ 1268.143128] md: super_written gets error=-5
[ 1268.143186] md: super_written gets error=-5
[ 1268.143270] md: super_written gets error=-5
[ 1268.143430] md: super_written gets error=-5
[ 1268.143489] md: super_written gets error=-5
[ 1268.143569] md: super_written gets error=-5
[ 1268.143620] md: super_written gets error=-5
[ 1268.143678] md: super_written gets error=-5
[ 1268.143736] md: super_written gets error=-5
[ 1268.143818] md: super_written gets error=-5
[ 1268.143929] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.143977] EXT4-fs (md127): I/O error while writing superblock
[ 1268.144063] md: super_written gets error=-5
[ 1268.144124] md: super_written gets error=-5
[ 1268.144206] md: super_written gets error=-5
[ 1268.144258] md: super_written gets error=-5
[ 1268.144318] md: super_written gets error=-5
[ 1268.144375] md: super_written gets error=-5
[ 1268.144457] md: super_written gets error=-5
[ 1268.144631] md: super_written gets error=-5
[ 1268.144662] md: super_written gets error=-5
[ 1268.144717] md: super_written gets error=-5
[ 1268.144777] md: super_written gets error=-5
[ 1268.144835] md: super_written gets error=-5
[ 1268.144892] md: super_written gets error=-5
[ 1268.144976] md: super_written gets error=-5
[ 1268.145162] EXT4-fs error (device md127): __ext4_find_entry:1536: inode #53346523: comm php: reading directory lblock 0
[ 1268.145616] md: super_written gets error=-5
[ 1268.145683] md: super_written gets error=-5
[ 1268.145774] md: super_written gets error=-5
[ 1268.145832] md: super_written gets error=-5
[ 1268.145891] md: super_written gets error=-5
[ 1268.145975] md: super_written gets error=-5
[ 1268.146049] md: super_written gets error=-5
[ 1268.146551] md: super_written gets error=-5
[ 1268.146614] md: super_written gets error=-5
[ 1268.146703] md: super_written gets error=-5
[ 1268.146759] md: super_written gets error=-5
[ 1268.146817] md: super_written gets error=-5
[ 1268.146873] md: super_written gets error=-5
[ 1268.146953] md: super_written gets error=-5
[ 1268.147204] md: super_written gets error=-5
[ 1268.147264] md: super_written gets error=-5
[ 1268.147352] md: super_written gets error=-5
[ 1268.147405] md: super_written gets error=-5
[ 1268.147462] md: super_written gets error=-5
[ 1268.147520] md: super_written gets error=-5
[ 1268.147603] md: super_written gets error=-5
[ 1268.147805] md: super_written gets error=-5
[ 1268.147865] md: super_written gets error=-5
[ 1268.147949] md: super_written gets error=-5
[ 1268.148001] md: super_written gets error=-5
[ 1268.148059] md: super_written gets error=-5
[ 1268.148117] md: super_written gets error=-5
[ 1268.148199] md: super_written gets error=-5
[ 1268.148391] md: super_written gets error=-5
[ 1268.148451] md: super_written gets error=-5
[ 1268.148539] md: super_written gets error=-5
[ 1268.148590] md: super_written gets error=-5
[ 1268.148648] md: super_written gets error=-5
[ 1268.148706] md: super_written gets error=-5
[ 1268.148789] md: super_written gets error=-5
[ 1268.149111] md: super_written gets error=-5
[ 1268.149171] md: super_written gets error=-5
[ 1268.149257] md: super_written gets error=-5
[ 1268.149309] md: super_written gets error=-5
[ 1268.149368] md: super_written gets error=-5
[ 1268.149447] md: super_written gets error=-5
[ 1268.149523] md: super_written gets error=-5
[ 1268.149729] EXT4-fs warning (device md127): ext4_end_bio:349: I/O error 10 writing to inode 53280868 starting block 55313728)
[ 1268.149823] EXT4-fs error (device md127): ext4_check_bdev_write_error:216: comm kworker/u8:0: Error while async write back metadata
[ 1268.149912] Aborting journal on device md127-8.
[ 1268.151388] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.151441] EXT4-fs (md127): I/O error while writing superblock
[ 1268.151450] EXT4-fs (md127): previous I/O error to superblock detected
[ 1268.151684] EXT4-fs error (device md127): __ext4_find_entry:1536: inode #53346523: comm php: reading directory lblock 0
[ 1268.151780] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.151822] EXT4-fs (md127): I/O error while writing superblock
[ 1268.151827] EXT4-fs (md127): previous I/O error to superblock detected
[ 1268.151845] EXT4-fs error (device md127) in ext4_reserve_inode_write:5751: Journal has aborted
[ 1268.151969] md: super_written gets error=-5
[ 1268.152040] md: super_written gets error=-5
[ 1268.152147] md: super_written gets error=-5
[ 1268.152207] md: super_written gets error=-5
[ 1268.152267] md: super_written gets error=-5
[ 1268.152327] md: super_written gets error=-5
[ 1268.152413] md: super_written gets error=-5
[ 1268.152532] Buffer I/O error on dev md127, logical block 732463104, lost sync page write
[ 1268.152577] JBD2: Error -5 detected when updating journal superblock for md127-8.
[ 1268.152607] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.152651] EXT4-fs (md127): I/O error while writing superblock
[ 1268.152656] EXT4-fs (md127): previous I/O error to superblock detected
[ 1268.152834] EXT4-fs error (device md127): __ext4_find_entry:1536: inode #53346523: comm php: reading directory lblock 0
[ 1268.152924] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.152966] EXT4-fs (md127): I/O error while writing superblock
[ 1268.152971] EXT4-fs (md127): previous I/O error to superblock detected
[ 1268.152989] EXT4-fs error (device md127): __ext4_ext_dirty:169: inode #53280868: comm kworker/u8:0: mark_inode_dirty error
[ 1268.153049] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.153093] EXT4-fs (md127): I/O error while writing superblock
[ 1268.153251] EXT4-fs error (device md127): __ext4_find_entry:1536: inode #53346523: comm php: reading directory lblock 0
[ 1268.153333] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.153447] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.153501] EXT4-fs warning (device md127): ext4_convert_unwritten_extents:4773: inode #53280868: block 0: len 463: ext4_ext_map_blocks returned -30
[ 1268.153525] EXT4-fs error (device md127): ext4_check_bdev_write_error:216: comm kworker/u8:0: Error while async write back metadata
[ 1268.153632] EXT4-fs error (device md127): __ext4_find_entry:1536: inode #53346523: comm php: reading directory lblock 0
[ 1268.153722] Buffer I/O error on dev md127, logical block 0, lost sync page write
[ 1268.155451] Buffer I/O error on device md127, logical block 55313408
[ 1268.155484] Buffer I/O error on device md127, logical block 55313409
[ 1268.155508] Buffer I/O error on device md127, logical block 55313410
[ 1268.155531] Buffer I/O error on device md127, logical block 55313411
[ 1268.155553] Buffer I/O error on device md127, logical block 55313412
[ 1268.155577] Buffer I/O error on device md127, logical block 55313413
[ 1268.155601] Buffer I/O error on device md127, logical block 55313414
[ 1268.155625] Buffer I/O error on device md127, logical block 55313415
[ 1268.155648] Buffer I/O error on device md127, logical block 55313416
[ 1268.155671] Buffer I/O error on device md127, logical block 55313417
[ 1268.161394] EXT4-fs error (device md127): ext4_journal_check_start:83: Detected aborted journal
[ 1268.316504] sd 1:0:0:1: [sdd] Synchronizing SCSI cache
[ 1268.595348] md: super_written gets error=-5
[ 1268.595373] md: super_written gets error=-5
[ 1268.615340] md: super_written gets error=-5
[ 1268.615393] md: super_written gets error=-5
[ 1268.615414] md: super_written gets error=-5
[ 1268.635347] md: super_written gets error=-5
[ 1268.875381] sd 1:0:0:1: [sdd] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 1268.945945] xhci_hcd 0000:01:00.0: WARN Can't disable streams for endpoint 0x82, streams are being disabled already
[ 1271.380943] md: super_written gets error=-5
[ 1271.380967] md: super_written gets error=-5
[ 1271.380983] md: super_written gets error=-5
[ 1272.988813] md: super_written gets error=-5
[ 1272.988857] md: super_written gets error=-5
[ 1272.988891] md: super_written gets error=-5
[ 1272.990814] md127: detected capacity change from 6000790732800 to 0
[ 1272.990894] md: md127 stopped.