有一个issabel VM,我通过ESXi将VM硬盘从20G增加到1.07T。
接下来我添加 sda4 分区作为新的 Linux LVM(以下这条路在步骤 22 ),似乎我现在必须使用,vgextend [volume group] /dev/sda4
但没有卷组,或者至少,,vgdisplay
将显示没有。这里是输出:vgs
dh -f
VG
fdisk-l:
Disk /dev/sda: 1176.5 GB, 1176477441536 bytes, 2297807503 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000c90e0
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 616447 307200 83 Linux
/dev/sda2 616448 4810751 2097152 82 Linux swap / Solaris
/dev/sda3 4810752 41943039 18566144 83 Linux
/dev/sda4 41943040 2297807502 1127932231+ 8e Linux LVM
DF-H:
Filesystem Size Used Avail Use% Mounted on
devtmpfs 2.0G 0 2.0G 0% /dev
tmpfs 2.0G 0 2.0G 0% /dev/shm
tmpfs 2.0G 9.0M 2.0G 1% /run
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
/dev/sda3 18G 3.3G 14G 21% /
/dev/sda1 283M 118M 147M 45% /boot
tmpfs 396M 0 396M 0% /run/user/0
pv显示:
"/dev/sda4" is a new physical volume of "1.05 TiB"
--- NEW Physical volume ---
PV Name /dev/sda4
VG Name
PV Size 1.05 TiB
Allocatable NO
PE Size 0
Total PE 0
Free PE 0
Allocated PE 0
vgdisplay:
vgs:
lvdisplay:
我将 sda4 从 83 更改为 8e。
我应该怎么做才能延长?