我正在尝试向我的家庭服务器添加一堆 JBOD 磁盘,我有一个 SAS 扩展卡并添加了 4 x 2TB 磁盘,这些磁盘可以看作是单独的设备(37-40);但我无法将它们设置为 JBOD 使用。
sudo megacli -PDMakeJbod -PhysDrv[36:0,36:1,36:2,36:3] -a0
JBOD 已启用。
这很奇怪,因为它们都在插槽 0 处;如果我尝试将它们放入 Raid 5,它会说 [36:1] 不是磁盘,这是有道理的,因为它们都在“插槽 0”
4 个新磁盘连接到同一个 4 x SATA - MiniSAS 电缆。
有人能帮我指点一下吗?这是为我的家庭服务器准备的,所以尝试一些东西没有问题,因为没有什么依赖于它的运行。
细节:
sudo megacli -PDList -aALL | egrep -i "Slot|State|device"
Enclosure Device ID: 36
Slot Number: 0
Device Id: 37
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: CC25
Foreign State: None
Device Speed: 6.0Gb/s
Media Type: Hard Disk Device
Enclosure Device ID: 36
Slot Number: 0
Device Id: 38
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: CV22
Foreign State: None
Device Speed: 6.0Gb/s
Media Type: Hard Disk Device
Enclosure Device ID: 36
Slot Number: 0
Device Id: 39
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: CC25
Foreign State: None
Device Speed: 6.0Gb/s
Media Type: Hard Disk Device
Enclosure Device ID: 36
Slot Number: 0
Device Id: 40
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: 0A80
Foreign State: None
Device Speed: 6.0Gb/s
Media Type: Hard Disk Device
Enclosure Device ID: 252
Slot Number: 0
Device Id: 32
Firmware state: Online, Spun Up
Device Firmware Level: TE05
Foreign State: None
Device Speed: Unknown
Media Type: Hard Disk Device
Enclosure Device ID: 252
Slot Number: 1
Device Id: 33
Firmware state: Online, Spun Up
Device Firmware Level: TE05
Foreign State: None
Device Speed: Unknown
Media Type: Hard Disk Device
Enclosure Device ID: 252
Slot Number: 2
Device Id: 34
Firmware state: Online, Spun Up
Device Firmware Level: TE05
Foreign State: None
Device Speed: Unknown
Media Type: Hard Disk Device
Enclosure Device ID: 252
Slot Number: 3
Device Id: 35
Firmware state: Online, Spun Up
Device Firmware Level: U5E0
Foreign State: None
Device Speed: 6.0Gb/s
Media Type: Hard Disk Device