我正在尝试远程清点硬盘信息（序列号、磁盘大小、制造商……），但遇到了麻烦。我知道驱动器是在 RAID 控制器下配置的，但我可以在不重新启动的情况下查看此信息吗？到目前为止，我尝试了以下方法：
format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t2d0 <DEFAULT cyl 8872 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7450@2/pci1000,3060@3/sd@2,0
iostat -E
sd0 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
Vendor: AMI Product: Virtual CDROM Revision: 1.00 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 4 Predictive Failure Analysis: 0
sd2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: TEAC Product: DV-28SL Revision: 1.0A Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 6 Predictive Failure Analysis: 0
sd3 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
Vendor: AMI Product: Virtual Floppy Revision: 1.00 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 4 Predictive Failure Analysis: 0
sd5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: LSILOGIC Product: Logical Volume Revision: 3000 Serial No:
Size: 73.00GB <72999763456 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0
cfgadm -alv
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
c0 connected configured unknown
unavailable scsi-bus n /devices/pci@0,0/pci1022,7450@2/pci1000,3060@3:scsi
c0::dsk/c0t2d0 connected configured unknown LSILOGIC Logical Volume
unavailable disk n /devices/pci@0,0/pci1022,7450@2/pci1000,3060@3:scsi::dsk/c0t2d0
usb0/1 empty unconfigured ok
unavailable unknown n /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0:1
usb0/2 empty unconfigured ok
unavailable unknown n /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0:2
usb0/3 connected configured ok Mfg: American Megatrends Inc. Product: Virtual Keyboard and Mouse NConfigs: 1 Config: 0 <no cfg str descr>
unavailable usb-device n /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0:3
usb1/1 connected configured ok Mfg: American Megatrends Inc. Product: Virtual Cdrom Device NConfigs: 1 Config: 0 <no cfg str descr>
unavailable usb-storage n /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1:1
usb1/2 connected configured ok Mfg: American Megatrends Inc. Product: Virtual Floppy Device NConfigs: 1 Config: 0 <no cfg str descr>
unavailable usb-floppy n /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1:2
usb1/3 empty unconfigured ok
unavailable unknown n /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1:3
prtdiag
System Configuration: Sun Microsystems Sun Fire X4200 Server
BIOS Configuration: American Megatrends Inc. 080010 08/10/2005
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)
==== Processor Sockets ====================================
Version Location Tag
-------------------------------- --------------------------
Dual Core AMD Opteron(tm) Processor 275 H0
Dual Core AMD Opteron(tm) Processor 275 H1
Dual Core AMD Opteron(tm) Processor 275 H2
Dual Core AMD Opteron(tm) Processor 275 H3
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
------- ------ --- ------------------- --------------------
DDR in use 0 H0_DIMM0 BANK0
DDR in use 0 H0_DIMM1 BANK1
unknown empty 0 H0_DIMM2 BANK2
unknown empty 0 H0_DIMM3 BANK3
DDR in use 0 H1_DIMM0 BANK4
DDR in use 0 H1_DIMM1 BANK5
DDR in use 0 H1_DIMM2 BANK6
DDR in use 0 H1_DIMM3 BANK7
==== On-Board Devices =====================================
LSI serial-ATA #1
Gigabit Ethernet #1
Gigabit Ethernet #2
ATI Rage XL VGA
==== Upgradeable Slots ====================================
ID Status Type Description
--- --------- ---------------- ----------------------------
0 in use PCI-X PCIX SLOT0
1 available PCI-X PCIX SLOT1
2 available PCI-X PCIX SLOT2
3 available PCI-X PCIX SLOT3
4 available PCI-X PCIX SLOT4
raidctl -l
Controller: 0
Volume:c0t2d0
Disk: 0.2.0
Disk: 0.3.0
答案1
由于这是一个 LSI 控制器，您应该使用MegaCLI命令行实用程序来检索有关所连接的物理驱动器的信息：
./MegaCLI -PDList -aAll