我使用的是 Ubuntu 12.04。几分钟前,XSensors 还运行良好。由于一些更新,我不得不重新启动,然后它就停止工作了。我的意思是它只显示一个温度(另一个选项卡是空白的):
这是我的输出$ sensors
,显示正在检测到其他数据:
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +27.2°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 115.97 W (crit = 124.77 W)
it8720-isa-0228
Adapter: ISA adapter
in0: +1.41 V (min = +0.00 V, max = +4.08 V)
in1: +1.47 V (min = +0.00 V, max = +4.08 V)
in2: +3.38 V (min = +0.00 V, max = +4.08 V)
+5V: +2.94 V (min = +0.00 V, max = +4.08 V)
in4: +3.06 V (min = +0.00 V, max = +4.08 V)
in5: +2.91 V (min = +0.00 V, max = +4.08 V)
in6: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM
5VSB: +2.96 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.17 V
fan1: 2136 RPM (min = 0 RPM)
fan2: 724 RPM (min = 0 RPM)
fan3: 1318 RPM (min = 0 RPM)
fan4: 1094 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +42.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +39.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
cpu0_vid: +0.000 V
intrusion0: ALARM
有任何想法吗?
答案1
尝试在终端中运行以下命令:
sudo sensors-detect
答案2
由于两周内无法使用,我删除了 XSensors 并改用 Psensor。我甚至认为它是完成这项任务的更好选择。