带 3 个 LAN 卡的 Intel 服务器。
Board Mfg : Intel
Board Product : S5000PHB
06:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
06:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
07:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
07:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
08:03.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
08:03.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
以前的司机：
root@server2[/root]#modinfo e1000
filename: /lib/modules/2.6.18-53.el5PAE/kernel/drivers/net/e1000/e1000.ko
version: 7.3.20-k2-NAPI
license: GPL
description: Intel(R) PRO/1000 Network Driver
author: Intel Corporation, <[email protected]>
下载版本 8 并按照驱动程序的 README 常规方式安装：
root@server2[/var/tmp/e1000-8.0.35/src]#make install
make -C /lib/modules/2.6.18-53.el5PAE/build SUBDIRS=/var/tmp/e1000-8.0.35/src modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-53.el5-PAE-i686'
CC [M] /var/tmp/e1000-8.0.35/src/e1000_main.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_82540.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_82542.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_82541.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_82543.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_mac.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_nvm.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_phy.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_manage.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_param.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_ethtool.o
CC [M] /var/tmp/e1000-8.0.35/src/kcompat.o
CC [M] /var/tmp/e1000-8.0.35/src/e1000_api.o
LD [M] /var/tmp/e1000-8.0.35/src/e1000.o
Building modules, stage 2.
MODPOST
CC /var/tmp/e1000-8.0.35/src/e1000.mod.o
LD [M] /var/tmp/e1000-8.0.35/src/e1000.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-53.el5-PAE-i686'
gzip -c ../e1000.7 > e1000.7.gz
# remove all old versions of the driver
find /lib/modules/2.6.18-53.el5PAE -name e1000.ko -exec rm -f {} \; || true
find /lib/modules/2.6.18-53.el5PAE -name e1000.ko.gz -exec rm -f {} \; || true
install -D -m 644 e1000.ko /lib/modules/2.6.18-53.el5PAE/kernel/drivers/net/e1000/e1000.ko
/sbin/depmod -a || true
install -D -m 644 e1000.7.gz /usr/share/man/man7/e1000.7.gz
man -c -P'cat > /dev/null' e1000 || true
No manual entry for e1000
之后跑了rmmod e1000和modprobe e1000。所有配置文件仍然在原来的位置。 lsmod显示模块已加载。
Modinfo 显示驱动程序的新版本。
root@server2[/]#modinfo e1000
filename: /lib/modules/2.6.18-53.el5PAE/kernel/drivers/net/e1000/e1000.ko
version: 8.0.35-NAPI
license: GPL
description: Intel(R) PRO/1000 Network Driver
author: Intel Corporation, <[email protected]>
但现在只有 eth0 和 eth1 接口可用。所以 eth2、eth3、eth4 和 eth5 现在已经消失了。
root@server2[/]#service network restart
Shutting down interface bond0: [ OK ]
Shutting down interface bond1: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface bond0: e1000 device eth2 does not seem to be present, delaying initialization.
[ OK ]
Bringing up interface bond1: e1000 device eth3 does not seem to be present, delaying initialization.
[ OK ]
Bringing up interface eth4: e1000 device eth4 does not seem to be present, delaying initialization.
[FAILED]
root@server2[/sys/class/net]#ls -la
total 0
drwxr-xr-x 7 root root 0 Feb 17 17:22 .
drwxr-xr-x 26 root root 0 Feb 17 10:40 ..
drwxr-xr-x 4 root root 0 Feb 17 10:40 bond0
drwxr-xr-x 4 root root 0 Feb 17 10:40 bond1
-rw-r--r-- 1 root root 0 Feb 17 10:40 bonding_masters
drwxr-xr-x 3 root root 0 Feb 17 17:22 eth0
drwxr-xr-x 3 root root 0 Feb 17 17:22 eth1
drwxr-xr-x 3 root root 0 Feb 17 10:40 lo
重新启动没有帮助。 dmesg 显示没有尝试引入任何其他接口：
root@server2[/root]#dmesg | grep -i eth
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007)
bonding: bond0: Unable to set eth0 as primary slave as it is not a slave.
bonding: bond0: Adding slave eth0.
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bonding: bond0: Setting eth0 as primary slave.
e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
bonding: bond1: Unable to set eth3 as primary slave as it is not a slave.
bonding: bond1: Adding slave eth1.
bonding: bond1: enslaving eth1 as a backup interface with a down link.
bonding: bond1: Unable to set eth3 as primary slave as it is not a slave.
e1000: eth1: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
bonding: bond1: link status definitely up for interface eth1.
bonding: bond1: making interface eth1 the new active one.
我花了很多时间试图让它发挥作用。不记得我尝试过的所有事情。如果您提供有关系统如何打开网络接口以及现在不这样做的原因的任何建议、提示或信息，我将不胜感激。