我正在使用 ubuntu 12.04,在连接我家的 wifi 时遇到了一些问题。以下是简要概述:
- 我家的 wifi 可以用,因为我通过以太网上网
- 我的无线驱动程序可以正常工作,因为我可以成功连接到办公室的 wifi
- 我甚至无法 ping 通我的路由器!
所以,我不明白它不起作用的原因!我正在使用 ubuntu 12.04。以下是有关连接和类似信息:
alecive@calliope:~$ nm-tool
NetworkManager Tool
State: connected (global)
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: atl1c
State: unavailable
Default: no
HW Address: 00:24:BE:EB:DA:87
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: off
- Device: wlan0 [InfostradaWiFi-004309] ---------------------------------------
Type: 802.11 WiFi
Driver: iwlwifi
State: connected
Default: yes
HW Address: 00:27:10:2B:68:28
Capabilities:
Speed: 135 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points (* = current AP)
FASTWEB-1-00219631C110: Infra, 00:21:96:31:C1:18, Freq 2462 MHz, Rate 54 Mb/s, Strength 82 WPA
Vodafone-23070663: Infra, 00:24:89:94:F6:AE, Freq 2437 MHz, Rate 54 Mb/s, Strength 50 WPA2
belkin.0bc: Infra, 08:86:3B:57:20:BC, Freq 2412 MHz, Rate 54 Mb/s, Strength 44 WPA WPA2
Ivica: Infra, 00:11:50:36:9C:EB, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 WPA
Paola WiFi: Infra, F8:D1:11:62:8C:CF, Freq 2462 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2
FASTWEB-1-0021964482E4: Infra, 00:21:96:44:82:EC, Freq 2462 MHz, Rate 54 Mb/s, Strength 20 WPA
ciao wireless: Infra, 00:25:9C:88:68:56, Freq 2462 MHz, Rate 54 Mb/s, Strength 27 WEP
TISCALI: Infra, 00:24:17:D9:2A:B7, Freq 2462 MHz, Rate 54 Mb/s, Strength 27
*InfostradaWiFi-004309: Infra, AC:E2:15:4A:35:74, Freq 2427 MHz, Rate 54 Mb/s, Strength 90 WPA
LEPRE35: Infra, 58:98:35:7E:D6:9B, Freq 2412 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2
TP-LINK: Infra, 00:14:78:EC:40:AA, Freq 2437 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2
Alice-92034414: Infra, 00:19:3E:15:82:B0, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA
MAMADOU: Infra, F0:7D:68:11:3F:E7, Freq 2437 MHz, Rate 11 Mb/s, Strength 24 WPA WPA2
M&A: Infra, 00:17:F2:E4:83:67, Freq 2412 MHz, Rate 54 Mb/s, Strength 29 WEP
Vodafone-26148616: Infra, 00:24:89:82:19:EE, Freq 2412 MHz, Rate 54 Mb/s, Strength 22 WPA2
FASTWEB-1-001CA2AE2E70: Infra, 00:1C:A2:AE:2E:70, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA
IPv4 Settings:
Address: 192.168.1.8
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 8.8.8.8
DNS: 8.8.4.4
alecive@calliope:~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:24:be:eb:da:87 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:27:10:2b:68:28 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.8/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::227:10ff:fe2b:6828/64 scope link
valid_lft forever preferred_lft forever
alecive@calliope:~$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
^C
--- 192.168.1.1 ping statistics ---
13 packets transmitted, 0 received, 100% packet loss, time 12094ms
alecive@calliope:~$
有人能帮帮我吗?谢谢!
答案1
需要检查或记住的几件事 1. 检查是否有其他无线设备可以连接并上网。以太网是有线的,路由器可以使用以太网正常工作,而无线部分则已损坏。 2. 检查您的防火墙,因为防火墙可能会阻止对无线连接的访问。看来您的计算机工作正常,您只是被阻止了。您也可以尝试“dhclient wlan0”,它应该会重置您的 IP 并可能解决问题。