我使用的是 archlinux 4.4.1-2，我正在尝试设置 netctl 服务。问题是，为了让 netctl 工作，我需要加载 bcma 和 b43。由于这两个不是树外模块，我认为我不必自己加载它们。
尽管如此，我也尝试加载本文中描述的文章这里。不幸的是，这似乎也不起作用。有谁知道问题可能是什么？感谢：D
bcma 的 modinfo
filename: /lib/modules/4.4.1-2-ARCH/kernel/drivers/bcma/bcma.ko.gz
license: GPL
description: Broadcom's specific AMBA driver
alias: pci:v000014E4d0000A8DCsv*sd*bc*sc*i*
alias: pci:v000014E4d0000A8DBsv*sd*bc*sc*i*
alias: pci:v000014E4d00004727sv*sd*bc*sc*i*
alias: pci:v000014E4d000043B1sv*sd*bc*sc*i*
alias: pci:v000014E4d000043AAsv*sd*bc*sc*i*
alias: pci:v000014E4d000043A9sv*sd*bc*sc*i*
alias: pci:v000014E4d000043A0sv*sd*bc*sc*i*
alias: pci:v000014E4d00004365sv*sd*bc*sc*i*
alias: pci:v000014E4d00004360sv*sd*bc*sc*i*
alias: pci:v000014E4d00004359sv*sd*bc*sc*i*
alias: pci:v000014E4d00004358sv*sd*bc*sc*i*
alias: pci:v000014E4d00004357sv*sd*bc*sc*i*
alias: pci:v000014E4d00004353sv*sd*bc*sc*i*
alias: pci:v000014E4d00004331sv*sd*bc*sc*i*
alias: pci:v000014E4d0000A8D8sv*sd*bc*sc*i*
alias: pci:v000014E4d00004313sv*sd*bc*sc*i*
alias: pci:v000014E4d00000576sv*sd*bc*sc*i*
和 b43 的 modinfo
filename: /lib/modules/4.4.1-2-ARCH/kernel/drivers/net/wireless/b43/b43.ko.gz
firmware: b43/ucode9.fw
firmware: b43/ucode5.fw
firmware: b43/ucode16_mimo.fw
firmware: b43/ucode15.fw
firmware: b43/ucode14.fw
firmware: b43/ucode13.fw
firmware: b43/ucode11.fw
license: GPL
author: Rafał Miłecki
author: Gábor Stefanik
author: Michael Buesch
author: Stefano Brivio
author: Martin Langer
description: Broadcom B43 wireless driver
alias: ssb:v4243id0812rev10*
alias: ssb:v4243id0812rev0F*
alias: ssb:v4243id0812rev0D*
alias: ssb:v4243id0812rev0C*
alias: ssb:v4243id0812rev0B*
alias: ssb:v4243id0812rev0A*
alias: ssb:v4243id0812rev09*
alias: ssb:v4243id0812rev07*
alias: ssb:v4243id0812rev06*
alias: ssb:v4243id0812rev05*
alias: bcma:m04BFid0812rev2Acl*
alias: bcma:m04BFid0812rev28cl*
alias: bcma:m04BFid0812rev1Ecl*
alias: bcma:m04BFid0812rev1Dcl*
alias: bcma:m04BFid0812rev1Ccl*
alias: bcma:m04BFid0812rev18cl*
alias: bcma:m04BFid0812rev17cl*
alias: bcma:m04BFid0812rev15cl*
alias: bcma:m04BFid0812rev11cl*
depends: mac80211,ssb,bcma,led-class,mmc_core,cfg80211,rng-core
intree: Y
vermagic: 4.4.1-2-ARCH SMP preempt mod_unload modversions
parm: bad_frames_preempt:enable(1) / disable(0) Bad Frames Preemption (int)
parm: fwpostfix:Postfix for the .fw files to load. (string)
parm: hwpctl:Enable hardware-side power control (default off) (int)
parm: nohwcrypt:Disable hardware encryption. (int)
parm: hwtkip:Enable hardware tkip. (int)
parm: qos:Enable QOS support (default on) (int)
parm: btcoex:Enable Bluetooth coexistence (default on) (int)
parm: verbose:Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug (int)
parm: pio:Use PIO accesses by default: 0=DMA, 1=PIO (int)
parm: allhwsupport:Enable support for all hardware (even it if overlaps with the brcmsmac driver) (int)
答案1
有一个文件/etc/modules列出了启动时要加载的模块。只需将这些模块添加到该文件中即可