☰

USB 3.0 Asix AX88179 无法在 Ubuntu 13.10 上运行

tag-icon • tag-icon drivers upgrade usb kernel 13.10
USB 3.0 Asix AX88179 无法在 Ubuntu 13.10 上运行

我从 13.04 升级到 13.10，并且安装了 AX88179 驱动程序电力供应协议。
当我升级 USB 3.0 到以太网转换器时，它停止工作，尽管从 3.9 开始它应该包含在内核主线中。系统正在识别它，但没有建立连接。
以下是相关的详细lsusb输出：

Bus 004 Device 006: ID 0b95:1790 ASIX Electronics Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x0b95 ASIX Electronics Corp.
  idProduct          0x1790 
  bcdDevice            1.00
  iManufacturer           1 ASIX Elec. Corp.
  iProduct                2 AX88179
  iSerial                 3 00000000000001
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           57
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              124mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol      0 
      iInterface              4 Network_Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              11
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat           1 micro seconds
    bU2DevExitLat         101 micro seconds
Device Status:     0x000c
  (Bus Powered)
  U1 Enabled
  U2 Enabled

与这个问题该设备不再被识别为以太网设备。以下是 dmseg 的相关输出：

dmesg | grep ASIX
[    3.238120] usb 4-2: Manufacturer: ASIX Elec. Corp.
[   61.907446] usb 4-2: Manufacturer: ASIX Elec. Corp.
[   84.772115] usb 4-1: Manufacturer: ASIX Elec. Corp.
[  192.615236] usb 4-2: Manufacturer: ASIX Elec. Corp.
[ 1146.200351] usb 4-2: Manufacturer: ASIX Elec. Corp.

dmesg | grep AX88179
[    3.238119] usb 4-2: Product: AX88179
[   61.907444] usb 4-2: Product: AX88179
[   84.772110] usb 4-1: Product: AX88179
[  192.615231] usb 4-2: Product: AX88179
[ 1146.200346] usb 4-2: Product: AX88179

据我所知，升级后未安装驱动程序。

答案1

除非 Ubuntu 进入睡眠模式，否则驱动程序工作正常。从睡眠状态恢复后，驱动程序就会停止工作。
我发现的唯一解决方法是停用睡眠模式。

答案2

我安装了 ppa：

add-apt-repository ppa:qji/ax88179
# since there is no source for soucy, replace it with raring:
sed s/saucy/raring/g /etc/apt/sources.list.d/qji-ax88179-saucy.list>/etc/apt/sources.list.d/qji-ax88179-raring.list
rm /etc/apt/sources.list.d/qji-ax88179-saucy.list
aptitude update
aptitude install ax88179 
reboot

有效一度，只有在第一次重启后才有效。从那时起，我在 syslog 中收到失败错误。但它在我朋友的笔记本电脑上运行良好，使用的是 parabola linux。我会再买一个适配器 ;)

相关内容