问题

问题

问题

从标题来看,我无法与我的HP Pavilion dv7-2215elUbuntu14.10 了。我可能已经阅读了所有相关问题,但这些问题都没有帮助我解决问题,所以我现在认为以太网薯片炸了:(

一些细节

我在这里发布一些有关我目前情况的详细信息。我希望有人能发现一些问题和/或建议我进行其他测试和/或提供解决方案。

ifconfig
eth0      Link encap:Ethernet  HWaddr 00:26:9e:74:21:4d
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:46 Base address:0x6000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:990 errors:0 dropped:0 overruns:0 frame:0
          TX packets:990 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:82952 (82.9 KB)  TX bytes:82952 (82.9 KB)

wlan0     Link encap:Ethernet  HWaddr 0c:ee:e6:9a:8c:4d
          inet addr:10.0.0.11  Bcast:10.0.0.255  Mask:255.255.255.0
          inet6 addr: fe80::eee:e6ff:fe9a:8c4d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5241 errors:0 dropped:0 overruns:0 frame:54415
          TX packets:5272 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1958537 (1.9 MB)  TX bytes:1087330 (1.0 MB)
          Interrupt:16
--------------------------------------------------------------------------------
cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
--------------------------------------------------------------------------------
cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

no-auto-default=00:26:9E:74:21:4D,

[ifupdown]
managed=false
--------------------------------------------------------------------------------
dmesg | grep -e eth0 -e Eth
[    0.929043] r8168 Gigabit Ethernet driver 8.039.00-NAPI loaded
[   19.451371] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.656823] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.431047] eth0: 0xffffc90000656000, 00:26:9e:74:21:4d, IRQ 46
[   24.458314] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.458584] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
--------------------------------------------------------------------------------
nm-tool

NetworkManager Tool

State: connected (global)

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            r8168
  State:             unavailable
  Default:           no
  HW Address:        00:26:9E:74:21:4D

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off


- Device: wlan0  [HOME-9885] ---------------------------------------------------
  Type:              802.11 WiFi
  Driver:            wl
  State:             connected
  Default:           yes
  HW Address:        0C:EE:E6:9A:8C:4D

  Capabilities:
    Speed:           54 Mb/s

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points (* = current AP)
    *HOME-9885:      Infra, 58:23:8C:2D:98:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 76 WPA WPA2
    bear09:          Infra, C8:D7:19:D1:47:89, Freq 2437 MHz, Rate 54 Mb/s, Strength 79 WPA WPA2
    NETGEAR14:       Infra, 44:94:FC:94:E8:7E, Freq 2462 MHz, Rate 54 Mb/s, Strength 70 WPA2
    medialink201:    Infra, 14:35:8B:0C:96:88, Freq 2442 MHz, Rate 54 Mb/s, Strength 60 WPA
    APT 12102:       Infra, 98:FC:11:D5:60:29, Freq 2412 MHz, Rate 54 Mb/s, Strength 37 WPA2
    NETGEAR85:       Infra, 44:94:FC:3E:2F:95, Freq 2462 MHz, Rate 54 Mb/s, Strength 32 WPA2
    HP-Print-27-ENVY 4500 series: Infra, 28:80:23:ED:62:27, Freq 2427 MHz, Rate 54 Mb/s, Strength 20 WPA2
    xfinitywifi:     Infra, 5A:23:8C:2D:98:87, Freq 2412 MHz, Rate 54 Mb/s, Strength 97
    Dlink_1:         Infra, 1C:BD:B9:B1:40:E0, Freq 2417 MHz, Rate 54 Mb/s, Strength 17 WPA2
    AsusE:           Infra, 10:BF:48:3D:16:5B, Freq 2422 MHz, Rate 54 Mb/s, Strength 15 WPA2
    The League 2:    Infra, 08:86:3B:19:81:48, Freq 2437 MHz, Rate 54 Mb/s, Strength 35 WEP
    belkin.648:      Infra, 08:86:3B:19:06:48, Freq 2442 MHz, Rate 54 Mb/s, Strength 72 WPA WPA2
    belkin.18a:      Infra, 08:86:3B:19:81:8A, Freq 2462 MHz, Rate 54 Mb/s, Strength 27 WPA WPA2
    belkin.f4c:      Infra, 08:86:3B:17:3F:4C, Freq 2432 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2

  IPv4 Settings:
    Address:         10.0.0.11
    Prefix:          24 (255.255.255.0)
    Gateway:         10.0.0.1

    DNS:             75.75.75.75
    DNS:             75.75.76.76
--------------------------------------------------------------------------------
sudo lshw -c network

  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 02
       serial: 00:26:9e:74:21:4d
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:46 ioport:5000(size=256) memory:d1010000-d1010fff memory:d1000000-d100ffff memory:d1020000-d102ffff

如果这是硬件故障,您建议如何更换以太网芯片功能?某种USB以太网转换器?还有吗?


一些测试

以下测试无法帮助解决问题

sudo modprobe r8168

也不分配手册知识产权

dhclient eth0
ifconfig eth0 10.0.0.100/24 up
route add default gw 10.0.0.1

相关内容