是的,我知道这里有类似的主题,但我仍然需要帮助。我在 Intel Celeron J1800、2GB RAM 和 iGPU 以及 500GB HDD 上运行 Lubuntu 18.04 LTS。每次我按下关机、重启,将它们写入终端,但都不起作用……总是卡在“Lubuntu....”屏幕上,上面有那些点,一段时间后就会冻结。我必须按住电源按钮才能将其关闭。有什么办法可以解决吗?
编辑:这是我的inxi -Fxxxz
:
System: Host: server-0001 Kernel: 4.15.0-34-generic x86_64
bits: 64 gcc: 7.3.0
Desktop: LXDE (Openbox 3.6.1) info: lxpanel dm: lightdm
Distro: Ubuntu 18.04.1 LTS
Machine: Device: desktop System: ASUS product: All Series serial: N/A
Mobo: ASUSTeK model: J1800I-C v: Rev X.0x serial: N/A
UEFI: American Megatrends v: 0604 date: 06/10/2014
CPU: Dual core Intel Celeron J1800 (-MCP-)
arch: Silvermont rev.8 cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9662
clock speeds: min/max: 1332/2582 MHz 1: 1333 MHz 2: 1332 MHz
Graphics: Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
bus-ID: 00:02.0 chip-ID: 8086:0f31
Display Server: x11 (X.Org 1.19.6 )
drivers: modesetting (unloaded: fbdev,vesa)
Resolution: [email protected]
OpenGL: renderer: Mesa DRI Intel Bay Trail
version: 4.2 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio: Card-1 Intel Atom Processor Z36xxx/Z37xxx Series High Def. Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:0f04
Card-2 Creative Sound Blaster Tactic(3D) Sigma sound card
driver: USB Audio usb-ID: 001-005 chip-ID: 041e:3220
Sound: Advanced Linux Sound Architecture v: k4.15.0-34-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k bus-ID: 04:00.0 chip-ID: 168c:002b
IF: wlp4s0 state: down mac: <filter>
Drives: HDD Total Size: 500.1GB (6.0% used)
ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
serial: <filter> temp: 22C
Partition: ID-1: / size: 457G used: 29G (7%) fs: ext4 dev: /dev/sda2
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 32.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 139 Uptime: 1 min Memory: 262.5/3806.6MB
Init: systemd v: 237 runlevel: 5 Gcc sys: 7.3.0
Client: Shell (bash 4.4.191 running in lxterminal) inxi: 2.3.56terminal) inxi: 2.3.56`
答案1
我正在运行类似的硬件(ASUS J1800I-A SoC),我的解决方案是完全禁用中央管理委员会在 EFI 设置中并切换“安全启动“价值来自”视窗“ 到 ”其他操作系统“。