我买了一个外置硬盘:“My Book 8TB”。我从机箱中取出硬盘,现在将其用作内部硬盘。我想利用机箱,将 WD Green 4TB 放入其中。但是,无法识别该硬盘。在 Windows 中,当我尝试格式化时,它读取 0 字节,并且无法初始化该硬盘。
gparted 根本没有列出该设备。
我通过 USB 3.0 将它连接到我的 Linux 计算机并运行以下命令:消息。
它确实以某种方式得到识别,但我不知道下一步该做什么才能使驱动器在机箱中工作。
以下是清楚列出该设备的部分:
[ 115.900908] scsi 2:0:0:0: Direct-Access WD My Book 25EE 4007
PQ: 0 ANSI: 6
[ 115.901337] scsi 2:0:0:1: Enclosure WD SES Device 4007
PQ: 0 ANSI: 6
[ 115.903160] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 115.903769] scsi 2:0:0:1: Attached scsi generic sg2 type 13
[ 115.904259] sd 2:0:0:0: [sdb] Spinning up disk...
[ 115.917124] scsi 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
[ 115.917129] scsi 2:0:0:1: Failed to get diagnostic page 0x1
[ 115.917131] scsi 2:0:0:1: Failed to bind enclosure -19
[ 115.917145] ses 2:0:0:1: Attached Enclosure device
[ 116.924214] .
[ 117.948229] .
[ 118.972049] .
[ 119.996215] .
[ 121.020038] .
[ 122.044239] .
[ 123.068210] .
[ 124.092028] .
[ 125.116227] .
[ 126.140204] .
[ 126.140369] ready
由于系统磁盘是 sda,我认为这个应该是 sdb。它列出如下:
[ 207.147931] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 207.147933] sd 2:0:0:0: [sdb] Sense not available.
[ 207.147935] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[ 207.147937] sd 2:0:0:0: [sdb] 0-byte physical blocks
[ 207.147987] sd 2:0:0:0: [sdb] Write Protect is off
[ 207.147988] sd 2:0:0:0: [sdb] Mode Sense: 01 00 00 00
[ 207.148004] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 207.148008] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 207.148203] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 207.148205] sd 2:0:0:0: [sdb] Sense not available.
[ 207.148265] sd 2:0:0:0: [sdb] Attached SCSI disk
那么,我是否有希望配置驱动器以便在该机箱中使用它?