我是 Ubuntu 的新手级用户。我有几台运行 Ubuntu 桌面的笔记本电脑,我能够让它们运行(借助一些论坛搜索的帮助)。但是,这次我的所有搜索都没有结果。所以,我希望你们能帮助我解决一些网络问题。
我知道 Ubuntu Server 没有板载以太网控制器的驱动程序。因此,我找到了一个可用的 WiFi 适配器并使用它。在服务器安装过程中,安装程序没有看到任何网络。我也没有创建任何绑定。我以为安装后我可以使用 WiFi 适配器连接到网络并安装以太网驱动程序。
但是,安装后我得到以下命令输出lshw -C network
:
*-network:0 UNCLAIMED description: Ethernet controller product: 80003ES2LAN Gigabit Ethernet Controller (Copper) vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress cap_list configuration: latency=0 resources: memory:b8820000-b883ffff memory:b8400000-b87fffff ioport:3020(size=32) *-network:1 UNCLAIMED description: Ethernet controller product: 80003ES2LAN Gigabit Ethernet Controller (Copper) vendor: Intel Corporation physical id: 0.1 bus info: pci@0000:05:00.1 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress cap_list configuration: latency=0 resources: memory:b8800000-b881ffff memory:b8000000-b83fffff ioport:3000(size=32) *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlx000f60055331 serial: 00:0f:60:05:53:31 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=4.15.0-55-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11
命令的输出ip address
:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlx000f60055331: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:0f:60:05:53:31 brd ff:ff:ff:ff:ff:ff
关于如何使用 WiFi 适配器,有什么建议吗?
谢谢。