我遇到这个问题已经有一段时间了,当我尝试将 nvidia 设置保存到 xorg.conf 中时,我的主显示器被禁用。
过程:
我打开 nvidia 设置,然后转到第二台显示器设置,单击高级并检查“强制完整合成管道”,然后尝试保存设置。重新启动后,我的主显示器变黑,背光亮起,gdm 无法检测到它。
这是 xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 440.64
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VC239"
HorizSync 24.0 - 83.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 1650"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-2"
Option "metamodes" "nvidia-auto-select +1920+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
$ ubuntu 驱动程序列表
nvidia-driver-440, (kernel modules provided by linux-modules-nvidia-440-generic-hwe-20.04)
nvidia-driver-435, (kernel modules provided by nvidia-dkms-435)
backport-iwlwifi-dkms, (kernel modules provided by backport-iwlwifi-dkms)
系统信息
System: Host: ubuntu-pc Kernel: 5.4.0-28-generic x86_64 bits: 64 Desktop: Gnome 3.36.1
Distro: Ubuntu 20.04 LTS (Focal Fossa)
CPU: Topology: Quad Core model: Intel Core i5-9300H bits: 64 type: MT MCP L2 cache: 8192 KiB
Speed: 1300 MHz min/max: 800/2400 MHz Core speeds (MHz): 1: 1300 2: 1300 3: 1300 4: 1300 5: 1300 6: 1300 7: 1300
8: 1300
Graphics: Device-1: Intel UHD Graphics 630 driver: i915 v: kernel
Device-2: NVIDIA TU117M [GeForce GTX 1650 Mobile / Max-Q] driver: nvidia v: 435.21
Display: x11 server: X.Org 1.20.8 driver: modesetting,nvidia unloaded: fbdev,nouveau,vesa
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: GeForce GTX 1650/PCIe/SSE2 v: 4.6.0 NVIDIA 435.21