我的笔记本电脑上似乎安装了 BCM43142 的驱动程序:
lspci -k
02:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
Subsystem: Dell Wireless 1704 802.11n + BT 4.0
Kernel driver in use: bcma-pci-bridge
kernel modules: bcma
但是,似乎没有与该设备关联的无线接口:
ip link
不输出无线设备的任何信息。我查看了 Archlinux 文档,它没有说明如何将接口(即 wlan0)连接到无线设备。知道我将如何解决这个问题吗?
dmesg| grep bcma
更新:我得到以下dmesg
输出
[ 11.069453] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 11.561403] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 12.718246] r8169 0000:01:00.0 enp1s0: link up
[ 12.718274] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 15.017434] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 38.022260] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 71.026835] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 114.025121] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 148.297435] ERROR @wl_dev_intvar_get : error (-1)
[ 148.297440] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ 167.028256] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 230.049349] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 293.054357] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 356.117637] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 356.125132] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 419.109201] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 482.052441] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 545.067170] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 550.596770] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 608.087644] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 671.100683] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 671.108110] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 674.041554] ERROR @wl_dev_intvar_get : error (-1)
[ 674.041564] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ 734.132416] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 797.080622] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 860.126435] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 923.084072] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 986.177109] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 986.184353] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1011.528205] ERROR @wl_dev_intvar_get : error (-1)
[ 1011.528216] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ 1049.095516] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1112.124821] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1175.102042] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1238.133483] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1301.125476] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1364.117876] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1427.121597] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1490.152334] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
[ 1553.171802] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
更新2:
lspci -k
02:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
Subsystem: Dell Wireless 1704 802.11n + BT 4.0
Kernel driver in use: wl
Kernel modules: bcma, wl
sudo iwlist scan
wlp2s0 Interface doesn't support scanning : Invalid argument
ifconfig
wlp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 76:24:fe:f7:5e:ce txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
答案1
安装Broadcom-wl-dkms包裹。
yaourt
您可以使用(不推荐使用yay
)从 AUR 安装它请查看 AUR 助手的完整列表:
yaourt -S broadcom-wl-dkms
卸载冲突的模块。
rmmod b43
rmmod ssb
rmmod bcma
加载wl
模块:
modprobe -r wl
modprobe wl