我有一块 Seagate 2 TB 磁盘，可以与 Ubuntu 和 Windows 很好地兼容。
最近，在进行一些数据传输之后，尝试安全移除磁盘时出现错误并停止：“操作已挂起“。
我重启了电脑（事后看来，这可能是一个错误），并尝试再次连接磁盘。现在磁盘正在被检测到磁盘，但导致磁盘挂起。它也显示在文件资源管理器中，但我也无法从那里打开它。磁盘照常亮起。
它需要稍微长一点的时间（大约多 10 秒）才能显示在文件资源管理器中。
输出lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0cf3:e500 Qualcomm Atheros Communications
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bc2:ab26 Seagate RSS LLC Backup Plus Slim Portable Drive 1 TB
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 13d3:56b2 IMC Networks Integrated Camera
Bus 001 Device 003: ID 413c:301a Dell Computer Corp. Dell MS116 USB Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
部分输出dmesg
262.468843] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 262.489944] usb 2-3: New USB device found, idVendor=0bc2, idProduct=ab26, bcdDevice= 1.08
[ 262.489949] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 262.489952] usb 2-3: Product: BUP Slim BL
[ 262.489954] usb 2-3: Manufacturer: Seagate
[ 262.489956] usb 2-3: SerialNumber: NA97SR1C
[ 262.512222] usbcore: registered new interface driver usb-storage
[ 262.517535] scsi host2: uas
[ 262.517765] usbcore: registered new interface driver uas
[ 262.518160] scsi 2:0:0:0: Direct-Access Seagate BUP Slim BL 0108 PQ: 0 ANSI: 6
[ 262.519299] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 296.200282] sd 2:0:0:0: [sdb] Spinning up disk...
[ 297.259479] .ready
[ 297.260316] sd 2:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 297.260319] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 297.260504] sd 2:0:0:0: [sdb] Write Protect is off
[ 297.260507] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 297.260853] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 297.261178] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 297.286718] sdb: sdb1
[ 297.288946] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 341.333378] sd 2:0:0:0: [sdb] tag#6 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 341.333385] sd 2:0:0:0: [sdb] tag#6 CDB: Read(10) 28 00 34 c6 47 40 00 00 08 00
[ 341.345456] scsi host2: uas_eh_device_reset_handler start
[ 341.474068] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 341.495235] scsi host2: uas_eh_device_reset_handler success
[ 502.083042] sd 2:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=191s
[ 502.083096] sd 2:0:0:0: [sdb] tag#16 Sense Key : Not Ready [current]
[ 502.083101] sd 2:0:0:0: [sdb] tag#16 Add. Sense: Logical unit is in process of becoming ready
[ 502.083108] sd 2:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 34 c6 47 40 00 00 08 00
[ 502.083114] blk_update_request: I/O error, dev sdb, sector 885409600 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 592.456646] scsi host2: uas_pre_reset: timed out
[ 592.456825] sd 2:0:0:0: [sdb] tag#17 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 592.456832] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 34 c6 47 40 00 00 08 00
[ 592.456895] sd 2:0:0:0: [sdb] tag#17 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=90s
[ 592.456898] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 34 c6 47 40 00 00 08 00
[ 592.456903] blk_update_request: I/O error, dev sdb, sector 885409600 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 592.456910] Buffer I/O error on dev sdb1, logical block 110675944, async page read
[ 592.457628] blk_update_request: I/O error, dev sdb, sector 6139584 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[ 592.457662] blk_update_request: I/O error, dev sdb, sector 6139584 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 592.457666] Buffer I/O error on dev sdb1, logical block 767192, async page read
[ 592.457860] blk_update_request: I/O error, dev sdb, sector 6139584 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 592.457866] Buffer I/O error on dev sdb1, logical block 767192, async page read
[ 592.462453] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 592.720632] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
答案1
抱歉更新晚了，但@ChanganAuto 说的很对。驱动器彻底坏了，数据丢失了。我想有办法找回这些数据，但我不会想念它。下次我会买其他品牌的驱动器。