我正在尝试将两个外接显示器连接到我的笔记本电脑通过Selore&S-Global USB C 转双 HDMI 适配器。
它与 Windows 配合得相当好（在几次初始断开/重新连接事件之后它变得非常稳定），因此硬件兼容。
xrandr 检测监视器并且它们在设置中可见。
有时启动 Ubuntu 22.04 时，显示器最初会启动，但随后开始断开连接并重新连接，最终变黑。在此期间，笔记本电脑会间歇性地冻结，直到拔下适配器。
我的笔记本电脑使用集成 Intel UHD Graphics 630（Thunderbolt 3 USB 3.1 Gen 2）以及 NVIDIA GeForce RTX 2070 Max-Q。我将适配器插入 Thunderbolt USB-C 端口。
% sudo lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630]
01:00.0 VGA compatible controller: NVIDIA Corporation TU106M [GeForce RTX 2070 Mobile] (rev a1)
我看到此错误在dmesg输出中重复出现：
[ 1316.331073] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GLAN.GPEH], AE_NOT_FOUND (20220331/psargs-330)
[ 1316.331112] No Local Variables are initialized for Method [_L6D]
[ 1316.331119] No Arguments are initialized for method [_L6D]
[ 1316.331128] ACPI Error: Aborting method \_GPE._L6D due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[ 1316.331157] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L6D] (20220331/evgpe-511)
[ 1324.701972] usb 1-11: USB disconnect, device number 15
[ 1326.004425] usb 1-11: new full-speed USB device number 16 using xhci_hcd
[ 1326.165779] usb 1-11: not running at top speed; connect to a high speed hub
[ 1326.188456] usb 1-11: New USB device found, idVendor=2109, idProduct=0103, bcdDevice=15.51
[ 1326.188471] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1326.188478] usb 1-11: Product: USB 2.0 BILLBOARD
[ 1326.188483] usb 1-11: Manufacturer: VIA Technologies Inc.
[ 1326.188488] usb 1-11: SerialNumber: 0000000000000001
还有很多
[ 6178.052158] i915 0000:00:02.0: [drm] *ERROR* CPU pipe B FIFO underrun
完整的dmesg日志是这里。
对于可能出现的问题有什么建议吗？