![USB 驱动器未检测到或响应 13.04 | 怀疑存在电源问题](https://linux22.com/image/971919/USB%20%E9%A9%B1%E5%8A%A8%E5%99%A8%E6%9C%AA%E6%A3%80%E6%B5%8B%E5%88%B0%E6%88%96%E5%93%8D%E5%BA%94%2013.04%20%7C%20%E6%80%80%E7%96%91%E5%AD%98%E5%9C%A8%E7%94%B5%E6%BA%90%E9%97%AE%E9%A2%98.png)
嘿,
lsusb 无法检测到 TOSHIBA USB 2.0 硬盘,也无法通过 ls /dev/sd* 找到它。
根据保罗问题与 USB 电源有关,但在重新启动笔记本电脑且未连接 USB 设备后,系统日志的输出相同(见下文)。此外,我使用双头 USB 电缆来确保电源供应。
如何让 Ubuntu 枚举/识别我的 DELL LX502x 上的 USB 驱动器?
再见
Feb 18 12:32:32 laptop kernel: [ 166.175281] usb 3-2: new full-speed USB device number 6 using xhci_hcd
Feb 18 12:32:32 laptop kernel: [ 166.175712] usb 3-2: Device not responding to set address.
Feb 18 12:32:33 laptop kernel: [ 166.379229] usb 3-2: Device not responding to set address.
Feb 18 12:32:33 laptop kernel: [ 166.582606] usb 3-2: device not accepting address 6, error -71
Feb 18 12:32:33 laptop kernel: [ 166.694423] usb 3-2: new full-speed USB device number 7 using xhci_hcd
Feb 18 12:32:33 laptop kernel: [ 166.694835] usb 3-2: Device not responding to set address.
Feb 18 12:32:33 laptop kernel: [ 166.898418] usb 3-2: Device not responding to set address.
Feb 18 12:32:33 laptop kernel: [ 167.101839] usb 3-2: device not accepting address 7, error -71
Feb 18 12:32:33 laptop kernel: [ 167.213620] usb 3-2: new full-speed USB device number 8 using xhci_hcd
Feb 18 12:32:33 laptop kernel: [ 167.214055] usb 3-2: Device not responding to set address.
Feb 18 12:32:34 laptop kernel: [ 167.417702] usb 3-2: Device not responding to set address.
Feb 18 12:32:34 laptop kernel: [ 167.621033] usb 3-2: device not accepting address 8, error -71
Feb 18 12:32:34 laptop kernel: [ 167.732798] usb 3-2: new full-speed USB device number 9 using xhci_hcd
Feb 18 12:32:34 laptop kernel: [ 167.733227] usb 3-2: Device not responding to set address.
Feb 18 12:32:34 laptop kernel: [ 167.936909] usb 3-2: Device not responding to set address.
Feb 18 12:32:34 laptop kernel: [ 168.140214] usb 3-2: device not accepting address 9, error -71
Feb 18 12:32:34 laptop kernel: [ 168.140268] hub 3-0:1.0: unable to enumerate USB device on port 2