刚刚在新版本上安装了 13.10,遇到了一些问题。主要问题与互联网有关。我的主板内置有 realtek 以太网适配器,虽然可以连接,但无法获取 IP 地址,也无法 ping 路由器。
其次,我的 wifi 适配器(TP-link WDN4800)可以看到无线网络,但在连接提示输入密码时,它实际上从未连接。
我可以用有线和无线的方式从家里的其他机器连接到路由器,并且我尝试过手动分配 IP 地址以防出现此问题。我还尝试了此处建议的修复方法:http://www.linux-hardware-guide.com/ca/2012-11-01-tp-link-tl-wdn4800-wireless-n-dual-band-pcie-450mbps没有运气。
目前我通过我的iPhone(USB)连接到WIFI。
非常感谢您的帮助。一旦 Ubuntu 开始工作,我就很喜欢它,但事实证明,设置它是一件非常痛苦的事情。
编辑:也尝试了 12.04 LTS - 这里也存在这两个问题。
编辑 2-运行dmesg | grep -E 'cfg|ath|wlan'
得到:
[ 835.322749] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 836.295689] wlan0: authenticate with 08:76:ff:c8:67:d0
[ 836.303592] wlan0: direct probe to 08:76:ff:c8:67:d0 (try 1/3)
[ 836.507237] wlan0: direct probe to 08:76:ff:c8:67:d0 (try 2/3)
[ 836.711325] wlan0: direct probe to 08:76:ff:c8:67:d0 (try 3/3)
[ 836.915507] wlan0: authentication with 08:76:ff:c8:67:d0 timed out
[ 837.344859] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026800
[ 837.516237] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 837.580301] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 837.592172] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026800
[ 837.592205] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 837.656339] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 837.668245] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026800
[ 837.668280] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 837.732029] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 837.743565] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 837.743587] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 837.808400] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 837.820465] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00024e00
[ 837.820501] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 837.884470] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 837.896318] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 837.896354] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 837.960517] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 837.972402] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 837.972436] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 838.036558] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 838.100608] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 838.112503] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026e00
[ 838.112533] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 838.176699] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 838.188617] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 838.188646] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 838.252692] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 838.264553] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 838.264585] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 841.309136] wlan0: deauthenticating from 08:76:ff:c8:67:d0 by local choice (reason=3)
[ 841.478857] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 841.490702] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 841.490737] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 841.558863] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 841.570786] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026800
[ 841.570823] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 841.634987] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 841.646875] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 841.646910] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 841.710992] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 841.774983] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 841.786866] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 841.786896] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 841.851053] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 841.862974] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 841.863006] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 841.927042] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 841.938943] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026e00
[ 841.938974] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 842.003202] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 842.067251] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 842.079114] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 842.079147] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 842.143292] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 842.155151] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026800
[ 842.155182] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 842.219331] ath: phy0: Failed to stop TX DMA, queues=0x001!
[ 842.231204] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
[ 842.231232] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
有什么想法吗?这看起来像是硬件问题。