正如标题所述，我在配备 Intel Broadwell Graphics 的 Dell XPS 2015 上运行 14.04。我需要传递nomodeset到内核来启动它。我无法全屏播放视频，并且无线在挂起后会死机，所以这不是一个理想的解决方案。
关于我的设置的一些信息：
# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09)
# lshw -C video
*-display UNCLAIMED
description: VGA compatible controller
product: Broadwell-U Integrated Graphics
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list
configuration: latency=0
resources: memory:f6000000-f6ffffff memory:e0000000-efffffff ioport:f000(size=64)
# modinfo i915
filename: /lib/modules/3.16.0-36-generic/kernel/drivers/gpu/drm/i915/i915.ko
license: GPL and additional rights
description: Intel Graphics
author: Tungsten Graphics, Inc.
srcversion: 4DEE70267367E5F1E3B45B0
alias: pci:v00008086d000022B3sv*sd*bc03sc*i*
[...]
alias: pci:v00008086d000022B2sv*sd*bc03sc*i*
depends: drm_kms_helper,drm,video,i2c-algo-bit
intree: Y
vermagic: 3.16.0-36-generic SMP mod_unload modversions
signer: Magrathea: Glacier signing key
sig_key: AC:F6:91:81:39:AD:3F:CA:CC:01:C2:6A:B2:49:09:D5:90:79:A5:78
sig_hashalgo: sha512
parm: modeset:Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, 1=on, -1=force vga console preference [default]) (int)
parm: panel_ignore_lid:Override lid status (0=autodetect, 1=autodetect disabled [default], -1=force lid closed, -2=force lid open) (int)
parm: powersave:Enable powersavings, fbc, downclocking, etc. (default: true) (int)
parm: semaphores:Use semaphores for inter-ring sync (default: -1 (use per-chip defaults)) (int)
parm: enable_rc6:Enable power-saving render C-state 6. Different stages can be selected via bitmask values (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. default: -1 (use per-chip default) (int)
parm: enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
parm: lvds_downclock:Use panel (LVDS/eDP) downclocking for power savings (default: false) (int)
parm: lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int)
parm: lvds_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
parm: vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table) (int)
parm: reset:Attempt GPU resets (default: true) (bool)
parm: enable_hangcheck:Periodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)
parm: enable_ppgtt:Override PPGTT usage. (-1=auto [default], 0=disabled, 1=aliasing, 2=full) (int)
parm: enable_psr:Enable PSR (default: false) (int)
parm: preliminary_hw_support:Enable preliminary hardware support. (int)
parm: disable_power_well:Disable the power well when possible (default: true) (int)
parm: enable_ips:Enable IPS (default: true) (int)
parm: fastboot:Try to skip unnecessary mode sets at boot time (default: false) (bool)
parm: prefault_disable:Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only. (bool)
parm: invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to [email protected], if your machine needs it. It will then be included in an upcoming module version. (int)
parm: disable_display:Disable display (default: false) (bool)
parm: disable_vtd_wa:Disable all VT-d workarounds (default: false) (bool)
parm: enable_cmd_parser:Enable command parsing (1=enabled [default], 0=disabled) (int)