我有一台运行良好的 Bose Soundlink Mini - 我可以将它与 Kubuntu (14.10) 配对,并将其设置为 Phonon 中视频的音频播放设备。听起来很棒。:)
我刚买了一台 Soundlink Mini II,现在遇到了麻烦。扬声器似乎没有通过蓝牙使用相同的高质量音频模式。听起来很糟糕。以下是摘录自
$ pacmd list-sinks
索引 1 是新款 Soundlink Mini II
索引 2 是我的旧 Soundlink Mini
index: 1
name: <bluez_sink.08_DF_1F_43_F9_CD>
driver: <module-bluetooth-device.c>
flags: HARDWARE HW_VOLUME_CTRL LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9530
volume: 0: 100%
balance 0.00
base volume: 100%
volume steps: 16
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 1ch 8000Hz
channel map: mono
Mono
used by: 0
linked by: 0
fixed latency: 128.00 ms
card: 1 <bluez_card.08_DF_1F_43_F9_CD>
module: 25
properties:
bluetooth.protocol = "hsp"
device.intended_roles = "phone"
device.description = "Bose Mini II SoundLink"
device.string = "08:DF:1F:43:F9:CD"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "speaker"
bluez.path = "/org/bluez/502/hci0/dev_08_DF_1F_43_F9_CD"
bluez.class = "0x240414"
bluez.name = "Bose Mini II SoundLink"
device.icon_name = "audio-speakers-bluetooth"
ports:
speaker-output: Speaker (priority 0, latency offset 0 usec, available: unknown)
properties:
active port: <speaker-output>
index: 2
name: <bluez_sink.00_0C_8A_B7_79_F2>
driver: <module-bluetooth-device.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY
state: IDLE
suspend cause:
priority: 9030
volume: 0: 80% 1: 80%
0: -5.81 dB 1: -5.81 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 65.06 ms
max request: 3 KiB
max rewind: 0 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 45.32 ms
card: 2 <bluez_card.00_0C_8A_B7_79_F2>
module: 27
properties:
bluetooth.protocol = "a2dp"
device.description = "Bose Mini SoundLink"
device.string = "00:0C:8A:B7:79:F2"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "hifi"
bluez.path = "/org/bluez/502/hci0/dev_00_0C_8A_B7_79_F2"
bluez.class = "0x240428"
bluez.name = "Bose Mini SoundLink"
device.icon_name = "audio-card-bluetooth"
ports:
hifi-output: HiFi (priority 0, latency offset 0 usec, available: yes)
properties:
active port: <hifi-output>
正如您所见,新扬声器的样品规格仅为单声道@8kHz。:(
这是否意味着我需要设置 pulseaudio 以使用 A2DP 来支持此设备?我该怎么做?我很乐意编辑配置文件,但我不知道从哪里开始。
谢谢。
答案1
我在 Ubuntu 14.04 上使用 bose soundlink mini 2 时也遇到了同样的问题。当我安装 BlueDevil 程序并使用它连接到 bose 时,问题就解决了。建立连接后,您需要打开声音设置,然后您就可以切换到 A2DP 配置文件 ;-) 希望这会有所帮助,因为我不是计算机专家。祝你好运!