![Ralink - 无线信号弱/差](https://linux22.com/image/997632/Ralink%20-%20%E6%97%A0%E7%BA%BF%E4%BF%A1%E5%8F%B7%E5%BC%B1%2F%E5%B7%AE.png)
我从 Windows 切换到 Ubuntu,几天后,我遇到了无线笔记本电脑连接问题,信号很慢,经常断开连接。有人知道该怎么做才能正常工作吗?谢谢
########## wireless info START ##########
Report from: 04 Feb 2017 11:15 EET +0200
Booted last: 04 Feb 2017 00:00 EET +0200
Script from: 08 Jul 2016 02:16 UTC +0000
##### release ###########################
Distributor ID: Ubuntu
Description: Ubuntu 16.10
Release: 16.10
Codename: yakkety
##### kernel ############################
Linux 4.8.0-37-generic #39-Ubuntu SMP Thu Jan 26 02:27:07 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Ubuntu
##### lspci #############################
07:00.0 Network controller [0280]: Ralink corp. Device [1814:539a]
DeviceName: Ralink WLAN Ralink Ripple3 RT5390F_802.11 b/g/n 1x1 PCIe HMC
Subsystem: Hewlett-Packard Company Device [103c:1839]
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 05)
DeviceName: Realtek PCIe FE Family Controller
Subsystem: Hewlett-Packard Company RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [103c:183e]
##### lsusb #############################
Bus 002 Device 003: ID 05c8:0223 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:078c Microsoft Corp.
Bus 003 Device 002: ID 0e8f:00a7 GreenAsia Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### lsmod #############################
hp_wmi 16384 0
sparse_keymap 16384 1 hp_wmi
rt2800pci 16384 0
rt2800mmio 20480 1 rt2800pci
rt2800lib 94208 2 rt2800mmio,rt2800pci
rt2x00pci 16384 1 rt2800pci
rt2x00mmio 16384 2 rt2800mmio,rt2800pci
rt2x00lib 57344 5 rt2800lib,rt2x00pci,rt2800mmio,rt2x00mmio,rt2800pci
mac80211 757760 3 rt2800lib,rt2x00pci,rt2x00lib
cfg80211 581632 2 rt2x00lib,mac80211
eeprom_93cx6 16384 1 rt2800pci
wmi 16384 1 hp_wmi
##### interfaces ########################
auto lo
iface lo inet loopback
##### ifconfig ##########################
eno1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 5520 bytes 337697 (337.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5520 bytes 337697 (337.6 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlo1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.7 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::e9a4:eb5a:8326:5de8 prefixlen 64 scopeid 0x20<link>
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 1223 bytes 909555 (909.5 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1300 bytes 206004 (206.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
##### iwconfig ##########################
eno1 no wireless extensions.
lo no wireless extensions.
wlo1 IEEE 802.11 ESSID:"Clicknet-ECCF"
Mode:Managed Frequency:2.417 GHz Access Point: <MAC 'Clicknet-ECCF' [AN6]>
Bit Rate=57.8 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=37/70 Signal level=-73 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:8 Invalid misc:103 Missed beacon:0
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 600 0 0 wlo1
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlo1
192.168.1.0 0.0.0.0 255.255.255.0 U 600 0 0 wlo1
##### resolv.conf #######################
nameserver 127.0.1.1
##### network managers ##################
Installed:
NetworkManager
Running:
root 1084 1 0 11:10 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Ralink corp.
GENERAL.PRODUCT: 7 Series/C210 Series Chipset Family PCI Express Root Port 1
GENERAL.DRIVER: rt2800pci
GENERAL.DRIVER-VERSION: 4.8.0-37-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: <MAC address>
GENERAL.MTU: 0
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.0/0000:07:00.0/net/wlo1
GENERAL.IP-IFACE: wlo1
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Clicknet-ECCF
GENERAL.CON-UUID: 923a33a4-e555-4612-8091-91ec294fc517
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/0
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: 57 Mb/s
CAPABILITIES.IS-SOFTWARE: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{0,1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: 923a33a4-e555-4612-8091-91ec294fc517 | Clicknet-ECCF
CONNECTIONS.AVAILABLE-CONNECTIONS[2]: 75a07422-8f64-4edd-a4f2-ca358f1be77f | RomTelecom-WEP-D09B
IP4.ADDRESS[1]: 192.168.1.7/24
IP4.GATEWAY: 192.168.1.1
IP4.ROUTE[1]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 192.168.1.1
DHCP4.OPTION[1]: requested_routers = 1
DHCP4.OPTION[2]: requested_domain_search = 1
DHCP4.OPTION[3]: requested_time_offset = 1
DHCP4.OPTION[4]: requested_domain_name = 1
DHCP4.OPTION[5]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[6]: requested_broadcast_address = 1
DHCP4.OPTION[7]: requested_wpad = 1
DHCP4.OPTION[8]: requested_netbios_scope = 1
DHCP4.OPTION[9]: next_server = 0.0.0.0
DHCP4.OPTION[10]: expiry = 1486285832
DHCP4.OPTION[11]: requested_interface_mtu = 1
DHCP4.OPTION[12]: requested_subnet_mask = 1
DHCP4.OPTION[13]: dhcp_lease_time = 86400
DHCP4.OPTION[14]: dhcp_message_type = 5
DHCP4.OPTION[15]: ip_address = 192.168.1.7
DHCP4.OPTION[16]: requested_static_routes = 1
DHCP4.OPTION[17]: requested_domain_name_servers = 1
DHCP4.OPTION[18]: dhcp_renewal_time = 43200
DHCP4.OPTION[19]: routers = 192.168.1.1
DHCP4.OPTION[20]: broadcast_address = 192.168.1.255
DHCP4.OPTION[21]: domain_name_servers = 192.168.1.1 0.0.0.0
DHCP4.OPTION[22]: requested_ntp_servers = 1
DHCP4.OPTION[23]: requested_netbios_name_servers = 1
DHCP4.OPTION[24]: dhcp_rebinding_time = 75600
DHCP4.OPTION[25]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[26]: subnet_mask = 255.255.255.0
DHCP4.OPTION[27]: network_number = 192.168.1.0
DHCP4.OPTION[28]: requested_host_name = 1
DHCP4.OPTION[29]: dhcp_server_identifier = 192.168.1.1
IP6.ADDRESS[1]: fe80::e9a4:eb5a:8326:5de8/64
IP6.GATEWAY:
GENERAL.DEVICE: eno1
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
GENERAL.DRIVER: r8169
GENERAL.DRIVER-VERSION: 2.3LK-NAPI
GENERAL.FIRMWARE-VERSION:
GENERAL.HWADDR: <MAC address>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.1/0000:08:00.0/net/eno1
GENERAL.IP-IFACE:
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
WIRED-PROPERTIES.CARRIER: off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE *
DIRECT-C7-BRAVIA <MAC 'DIRECT-C7-BRAVIA' [AN1]> Infra 9 2452 MHz 54 Mbit/s 62 ▂▄▆_ WPA2 no
RomTelecom-WEP-D09B <MAC 'RomTelecom-WEP-D09B' [AN2]> Infra 6 2437 MHz 54 Mbit/s 59 ▂▄▆_ WEP no
RomTelecom-WPA-D09B <MAC 'RomTelecom-WPA-D09B' [AN3]> Infra 6 2437 MHz 54 Mbit/s 59 ▂▄▆_ WPA2 no
Clicknet-4547 <MAC 'Clicknet-4547' [AN4]> Infra 9 2452 MHz 54 Mbit/s 59 ▂▄▆_ WPA2 no
DIGI-49A6 <MAC 'DIGI-49A6' [AN5]> Infra 1 2412 MHz 54 Mbit/s 52 ▂▄__ WPA1 WPA2 no
Clicknet-ECCF <MAC 'Clicknet-ECCF' [AN6]> Infra 2 2417 MHz 54 Mbit/s 47 ▂▄__ WPA2 yes *
WestMeck <MAC 'WestMeck' [AN7]> Infra 10 2457 MHz 54 Mbit/s 39 ▂▄__ WPA2 no
HUAWEI-8hbv <MAC 'HUAWEI-8hbv' [AN8]> Infra 9 2452 MHz 54 Mbit/s 35 ▂▄__ WPA1 WPA2 no
HUAWEI-Hx83 <MAC 'HUAWEI-Hx83' [AN9]> Infra 6 2437 MHz 54 Mbit/s 22 ▂___ WPA1 WPA2 no
Clicknet-2875 <MAC 'Clicknet-2875' [AN10]> Infra 4 2427 MHz 54 Mbit/s 19 ▂___ WPA2 no
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=false
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/RomTelecom-WEP-D09B]] (600 root)
[connection] id=RomTelecom-WEP-D09B | type=wifi | permissions=
[wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=RomTelecom-WEP-D09B
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Clicknet-ECCF]] (600 root)
[connection] id=Clicknet-ECCF | type=wifi | permissions=
[wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Clicknet-ECCF
[ipv4] method=auto
[ipv6] method=auto
##### iw reg get ########################
Region: Europe/Bucharest (based on set time zone)
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
(5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
(5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
eno1 no frequency information.
lo no frequency information.
wlo1 14 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 14 : 2.484 GHz
Current Frequency:2.417 GHz (Channel 2)
##### iwlist scan #######################
eno1 Interface doesn't support scanning.
lo Interface doesn't support scanning.
wlo1 Interface doesn't support scanning : Device or resource busy
##### module infos ######################
[rt2800pci]
filename: /lib/modules/4.8.0-37-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko
license: GPL
firmware: rt2860.bin
description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 4D2CAAE95D28B3DF4F72A52
depends: rt2x00lib,rt2800lib,rt2800mmio,rt2x00mmio,rt2x00pci,eeprom_93cx6
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
parm: nohwcrypt:Disable hardware encryption. (bool)
[rt2800mmio]
filename: /lib/modules/4.8.0-37-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko
license: GPL
description: rt2800 MMIO library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: DBE617B0243C0FEB62786D4
depends: rt2800lib,rt2x00lib,rt2x00mmio
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
[rt2800lib]
filename: /lib/modules/4.8.0-37-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko
license: GPL
description: Ralink RT2800 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
srcversion: 7092408A4EF1A70FC0C7538
depends: rt2x00lib,mac80211
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
[rt2x00pci]
filename: /lib/modules/4.8.0-37-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko
license: GPL
description: rt2x00 pci library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: D84965563CC7530CFFD2269
depends: rt2x00lib,mac80211
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
[rt2x00mmio]
filename: /lib/modules/4.8.0-37-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko
license: GPL
description: rt2x00 mmio library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 02CA9DA77FC2C7FCCC58176
depends: rt2x00lib
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
[rt2x00lib]
filename: /lib/modules/4.8.0-37-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko
license: GPL
description: rt2x00 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: CF930122B7900096FC259FA
depends: mac80211,cfg80211
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
[mac80211]
filename: /lib/modules/4.8.0-37-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: C63473656FCDBBDA56E12DA
depends: cfg80211
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.8.0-37-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: 5F9AB87008B83E8D5117A0B
depends:
intree: Y
vermagic: 4.8.0-37-generic SMP mod_unload modversions
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[rt2800pci]
nohwcrypt: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: Y
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/cfg80211.conf]
options cfg80211 cfg80211_disable_40mhz_24ghz=Y
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 22.186855] rt2800pci 0000:07:00.0 wlo1: renamed from wlan0
[ 39.935790] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 39.935823] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[ 40.506250] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[ 40.662135] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready (repeated 2 times)
[ 44.170695] wlo1: authenticate with <MAC 'Clicknet-ECCF' [AN6]>
[ 44.194590] wlo1: send auth to <MAC 'Clicknet-ECCF' [AN6]> (try 1/3)
[ 44.196099] wlo1: authenticated
[ 44.197627] wlo1: associate with <MAC 'Clicknet-ECCF' [AN6]> (try 1/3)
[ 44.201041] wlo1: RX AssocResp from <MAC 'Clicknet-ECCF' [AN6]> (capab=0x411 status=0 aid=2)
[ 44.201128] wlo1: associated
[ 44.201141] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 45.272011] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=48 TOS=0x00 PREC=0x00 TTL=255 ID=63 PROTO=UDP SPT=5355 DPT=5355 LEN=28
[ 45.521957] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=48 TOS=0x00 PREC=0x00 TTL=255 ID=64 PROTO=UDP SPT=5355 DPT=5355 LEN=28
[ 45.771992] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=48 TOS=0x00 PREC=0x00 TTL=255 ID=107 PROTO=UDP SPT=5355 DPT=5355 LEN=28
[ 46.522065] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=fe80:0000:0000:0000:e9a4:eb5a:8326:5de8 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=68 TC=0 HOPLIMIT=255 FLOWLBL=978145 PROTO=UDP SPT=5355 DPT=5355 LEN=28 (repeated 3 times)
[ 110.071296] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush (repeated 3 times)
[ 253.898980] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=53 TOS=0x00 PREC=0x00 TTL=255 ID=10979 PROTO=UDP SPT=5355 DPT=5355 LEN=33
[ 253.899104] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=10980 PROTO=UDP SPT=5355 DPT=5355 LEN=40
[ 253.899139] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=10981 PROTO=UDP SPT=5355 DPT=5355 LEN=36
[ 254.026796] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=53 TOS=0x00 PREC=0x00 TTL=255 ID=10994 PROTO=UDP SPT=5355 DPT=5355 LEN=33
[ 254.026890] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=10995 PROTO=UDP SPT=5355 DPT=5355 LEN=36
[ 254.026954] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=10996 PROTO=UDP SPT=5355 DPT=5355 LEN=40
[ 254.276779] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=53 TOS=0x00 PREC=0x00 TTL=255 ID=11030 PROTO=UDP SPT=5355 DPT=5355 LEN=33
[ 254.276849] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=11031 PROTO=UDP SPT=5355 DPT=5355 LEN=40
[ 254.276883] [UFW BLOCK] IN=wlo1 OUT= MAC= SRC=192.168.1.7 DST=224.0.0.252 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=11032 PROTO=UDP SPT=5355 DPT=5355 LEN=36
[ 255.784641] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush (repeated 13 times)
########## wireless info END ############