Ubuntu 16.04.2 从 USB 驱动器安装导致屏幕空白

Ubuntu 16.04.2 从 USB 驱动器安装导致屏幕空白

我尝试安装最新版本的 Ubuntu,从菜单中选择“安装 Ubuntu”选项后,它挂在空白屏幕上。

我看过其他与此相关的帖子,并尝试了他们的解决方案,但没有成功。我能够安装 15.04,但分辨率太差,我想升级,以便解决这个问题。 inxi -Fxxxz如果您需要有关我的电脑的更多信息,我运行了:

    System:     Kernel: 3.19.0-82-generic x86_64 (64 bit gcc: 4.9.2)
       Desktop: Unity 7.3.2 (Gtk 3.14.13-0ubuntu1) dm: lightdm
       Distro: Ubuntu 15.04 vivid
    Machine:   System: HP product: HP Pavilion Notebook Chassis: type: 10
       Mobo: HP model: 80AF v: 81.32
       Bios: American Megatrends v: F.41 date: 09/19/2016
    CPU:       Quad core AMD A10-8700P Radeon R6 10 Compute Cores 4C+6G (-MCP-) cache: 4096 KB
       flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 14373
       clock speeds: min/max: 1300/1800 MHz 1: 1600 MHz 2: 1300 MHz
       3: 1600 MHz 4: 1300 MHz
    Graphics:  Card: Advanced Micro Devices [AMD/ATI] Device 9874
       bus-ID: 00:01.0 chip-ID: 1002:9874
       Display Server: X.Org 1.17.1 drivers: fbdev,ati (unloaded: vesa,radeon)
       Resolution: [email protected]
       GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.6, 128 bits)
       GLX Version: 3.0 Mesa 10.5.9 Direct Rendering: Yes
    Audio:     Card-1 Advanced Micro Devices [AMD] Device 157a
       driver: snd_hda_intel bus-ID: 00:09.2 chip-ID: 1022:157a
       Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
       driver: snd_hda_intel bus-ID: 00:01.1 chip-ID: 1002:9840
       Sound: Advanced Linux Sound Architecture v: k3.19.0-82-generic
    Network:   Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast        Ethernet controller
       driver: r8169 v: 2.3LK-NAPI port: e000
       bus-ID: 02:00.0 chip-ID: 10ec:8136
       IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
       Card-2: Broadcom BCM43142 802.11b/g/n
       driver: bcma-pci-bridge bus-ID: 03:00.0 chip-ID: 14e4:4365
       IF: N/A state: N/A mac: N/A
    Drives:    HDD Total Size: 1008.3GB (0.5% used)
       ID-1: /dev/sda model: TOSHIBA_MQ01ABD1 size: 1000.2GB serial: 1685P1RBT temp: 36C
       ID-2: USB /dev/sdb model: USB_DISK size: 8.1GB serial:    DISK-0:0 temp: 0C
    Partition: ID-1: / size: 242G used: 4.6G (2%) fs: ext4 dev: /dev/sda5
    RAID:      System: supported: N/A
       No RAID devices: /proc/mdstat, md_mod kernel module present
       Unused Devices: none
    Sensors:   System Temperatures: cpu: 48.0C mobo: N/A
       Fan Speeds (in rpm): cpu: N/A
    Info:      Processes: 196 Uptime: 6 min Memory: 625.3/7364.8MB
       Init: systemd v: 219 runlevel: 5 default: 2 Gcc sys: 4.9.2
       Client: Shell (bash 4.3.301 running in gnome-terminal-)
    inxi: 2.2.16

答案1

添加

模式设置

在安装 Ubuntu 之前应该这样做

如果你看到 Ubuntu 安装的图形界面,应该有一个选项可以勾选模式设置在右下角。

但是,如果系统提示您使用类似 grub 版本的 Ubuntu 安装,请突出显示“安装 Ubuntu”,但不要立即按 Enter 键添加模式设置在显示启动画面后立即恢复安装。

相关内容