我已安装 GitLab Omnibus 软件包。我现在想使用 Plesk 中的 nginx，而不是打包的 nginx。我已将配置设置为不使用捆绑的 nginx。
现在我想使用 Plesk Onyx 中的 nginx 来向 gitlab 发送请求。如何配置 ngingx plesk 来执行此操作（Vhost？）？
我添加了以下内容：
## GitLab
##
## Modified from nginx http version
## Modified from http://blog.phusion.nl/2012/04/21/tutorial-setting-up-gitlab-on-debian-6/
## Modified from https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html
##
## Lines starting with two hashes (##) are comments with information.
## Lines starting with one hash (#) are configuration parameters that can be uncommented.
##
##################################
## CONTRIBUTING ##
##################################
##
## If you change this file in a Merge Request, please also create
## a Merge Request on https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests
##
###################################
## configuration ##
###################################
##
## See installation.md#using-https for additional HTTPS configuration details.
upstream gitlab-workhorse {
server unix:/var/opt/gitlab/gitlab-workhorse/socket fail_timeout=0;
}
## Redirects all HTTP traffic to the HTTPS host
server {
## Either remove "default_server" from the listen line below,
## or delete the /etc/nginx/sites-enabled/default file. This will cause gitlab
## to be served if you visit any address that your server responds to, eg.
## the ip address of the server (http://x.x.x.x/)
listen 0.0.0.0:80;
listen [::]:80 ipv6only=on;
server_name gitlab.nextgamers.eu; ## Replace this with something like gitlab.example.com
server_tokens off; ## Don't show the nginx version number, a security best practice
return 301 https://$http_host$request_uri;
access_log /var/log/nginx/gitlab_access.log;
error_log /var/log/nginx/gitlab_error.log;
}
## HTTPS host
server {
listen 0.0.0.0:443 ssl;
listen [::]:443 ipv6only=on ssl;
server_name gitlab.nextgamers.eu; ## Replace this with something like gitlab.example.com
server_tokens off; ## Don't show the nginx version number, a security best practice
root /opt/gitlab/embedded/service/gitlab-rails/public;
## Strong SSL Security
## https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html & https://cipherli.st/
ssl on;
ssl_certificate /etc/nginx/ssl/gitlab.crt;
ssl_certificate_key /etc/nginx/ssl/gitlab.key;
# GitLab needs backwards compatible ciphers to retain compatibility with Java IDEs
ssl_ciphers "ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA:ECDHE-RSA-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:AES256-GCM-SHA384:AES128-GCM-SHA256:AES256-SHA256:AES128-SHA256:AES256-SHA:AES128-SHA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4";
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_prefer_server_ciphers on;
ssl_session_cache shared:SSL:10m;
ssl_session_timeout 5m;
## See app/controllers/application_controller.rb for headers set
## [Optional] Enable HTTP Strict Transport Security
## HSTS is a feature improving protection against MITM attacks
## For more information see: https://www.nginx.com/blog/http-strict-transport-security-hsts-and-nginx/
# add_header Strict-Transport-Security "max-age=31536000; includeSubDomains";
## [Optional] If your certficate has OCSP, enable OCSP stapling to reduce the overhead and latency of running SSL.
## Replace with your ssl_trusted_certificate. For more info see:
## - https://medium.com/devops-programming/4445f4862461
## - https://www.ruby-forum.com/topic/4419319
## - https://www.digitalocean.com/community/tutorials/how-to-configure-ocsp-stapling-on-apache-and-nginx
# ssl_stapling on;
# ssl_stapling_verify on;
# ssl_trusted_certificate /etc/nginx/ssl/stapling.trusted.crt;
# resolver 208.67.222.222 208.67.222.220 valid=300s; # Can change to your DNS resolver if desired
# resolver_timeout 5s;
## [Optional] Generate a stronger DHE parameter:
## sudo openssl dhparam -out /etc/ssl/certs/dhparam.pem 4096
##
# ssl_dhparam /etc/ssl/certs/dhparam.pem;
## Individual nginx logs for this GitLab vhost
access_log /var/log/nginx/gitlab_access.log;
error_log /var/log/nginx/gitlab_error.log;
location / {
client_max_body_size 0;
gzip off;
## https://github.com/gitlabhq/gitlabhq/issues/694
## Some requests take more than 30 seconds.
proxy_read_timeout 300;
proxy_connect_timeout 300;
proxy_redirect off;
proxy_http_version 1.1;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-Ssl on;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
proxy_pass http://gitlab-workhorse;
}
}
gitlab.conf 在 nginx 的 conf.d 目录里面。nginx 启动失败，错误如下：
root@baby /etc/nginx/conf.d # systemctl status nginx.service
● nginx.service - Startup script for nginx service
Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Thu 2017-07-13 11:46:25 CEST; 4min 21s ago
Process: 7688 ExecStop=/bin/kill -s QUIT $MAINPID (code=exited, status=0/SUCCESS)
Process: 24657 ExecReload=/bin/kill -s HUP $MAINPID (code=exited, status=0/SUCCESS)
Process: 24654 ExecReload=/usr/sbin/nginx -t (code=exited, status=0/SUCCESS)
Process: 24651 ExecReload=/usr/bin/test $NGINX_ENABLED = yes (code=exited, status=0/SUCCESS)
Process: 7708 ExecStart=/usr/sbin/nginx (code=exited, status=1/FAILURE)
Process: 7700 ExecStartPre=/usr/sbin/nginx -t (code=exited, status=0/SUCCESS)
Process: 7697 ExecStartPre=/usr/bin/test $NGINX_ENABLED = yes (code=exited, status=0/SUCCESS)
Main PID: 5578 (code=exited, status=0/SUCCESS)
Jul 13 11:46:24 baby.freakyonline.de nginx[7708]: nginx: [emerg] bind() to [::]:443 failed (98: Address already in use)
Jul 13 11:46:24 baby.freakyonline.de nginx[7708]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
Jul 13 11:46:24 baby.freakyonline.de nginx[7708]: nginx: [emerg] bind() to [::]:443 failed (98: Address already in use)
Jul 13 11:46:25 baby.freakyonline.de nginx[7708]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
Jul 13 11:46:25 baby.freakyonline.de nginx[7708]: nginx: [emerg] bind() to [::]:443 failed (98: Address already in use)
Jul 13 11:46:25 baby.freakyonline.de nginx[7708]: nginx: [emerg] still could not bind()
Jul 13 11:46:25 baby.freakyonline.de systemd[1]: nginx.service: Control process exited, code=exited status=1
Jul 13 11:46:25 baby.freakyonline.de systemd[1]: Failed to start Startup script for nginx service.
Jul 13 11:46:25 baby.freakyonline.de systemd[1]: nginx.service: Unit entered failed state.
Jul 13 11:46:25 baby.freakyonline.de systemd[1]: nginx.service: Failed with result 'exit-code'.
root@baby /etc/nginx/conf.d #
即使我已经删除了 listen 选项的 default_server 部分。
如果有人能帮助我我将非常感激。
非常感谢！太奇怪了。
答案1
好的，我几乎已经按照以下教程完成了它的工作： https://www.jonasjuffinger.com/2017/03/26/gitlab-with-plesk-and-lets-encrypt/
虽然不是 let's encrypt 部分。但上面的链接回答了我在这里发布的问题。