![Ubuntu Server 21.10 - 如何使用 iPhone USB 网络共享?](https://linux22.com/image/1024736/Ubuntu%20Server%2021.10%20-%20%E5%A6%82%E4%BD%95%E4%BD%BF%E7%94%A8%20iPhone%20USB%20%E7%BD%91%E7%BB%9C%E5%85%B1%E4%BA%AB%EF%BC%9F.png)
我正尝试在安装在 Raspberry Pi 4 上的 Ubuntu Server 21.10 中通过 USB(网络共享)将我的 iPhone 用作热点:到目前为止尚未成功。
我安装了在互联网上找到的以下软件包:
sudo apt-get install ipheth-utils libimobiledevice-dev libimobiledevice-utils
然后,我通过 USB 将 iPhone 连接到 Raspberry Pi,但它不起作用。我尝试重新启动,然后sudo netplan apply
,但它仍然不起作用。
有关我的配置的信息:
- 树莓派 4
- Ubuntu 服务器 21.10
- iPhone 12 iOS 15.0.2
当我运行时ip a
,这是我得到的输出:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e4:5f:01:4c:a6:f0 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether e4:5f:01:4c:a6:f1 brd ff:ff:ff:ff:ff:ff
7: enx92fd6113afb3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 92:fd:61:13:af:b3 brd ff:ff:ff:ff:ff:ff
9: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
link/none
inet 10.8.0.6/24 scope global wg0
valid_lft forever preferred_lft forever
当我跑步时lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 009: ID 05ac:12a8 Apple, Inc. iPhone 5/5C/5S/6/SE
Bus 001 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
当前内核:
- 5.13.0-1008-raspi