Parrot os更新Busybox v1.22.1 initramfs后出现错误

Parrot os更新Busybox v1.22.1 initramfs后出现错误

我昨天正在升级和更新我的 Parrot os 3.2。重新启动后,我的屏幕上出现 Busybox v1.22.1 initramfs 错误:

在此输入图像描述

现在我已经阅读了一些必须使用实时 USB 的地方,所以我这样做了并输入以下命令:

┌─[user@parrot]─[~]
└──╼ $ sudo fdisk -l
Disk /dev/sda: 7.5 GiB, 8015314944 bytes, 15654912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x4ef96f1d

Device     Boot   Start     End Sectors   Size Id Type
/dev/sda1  *         64 7253183 7253120   3.5G 17 Hidden HPFS/NTFS
/dev/sda2       7253184 7489791  236608 115.5M  1 FAT12


Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x550a3000

Device     Boot      Start        End    Sectors   Size Id Type
/dev/sdb1               63      80324      80262  39.2M de Dell Utility
/dev/sdb2  *         81920   24686591   24604672  11.8G 27 Hidden NTFS WinRE
/dev/sdb3         24686592 1851119615 1826433024 870.9G  7 HPFS/NTFS/exFAT
/dev/sdb4       1851121662 1953523711  102402050  48.8G  5 Extended
/dev/sdb5       1936982016 1953523711   16541696   7.9G 82 Linux swap / Solaris
/dev/sdb6       1851121664 1860887288    9765625   4.7G 83 Linux
/dev/sdb7       1860888576 1936973823   76085248  36.3G 83 Linux

Partition 1 does not start on physical sector boundary.
Partition 4 does not start on physical sector boundary.
Partition table entries are not in disk order.


Disk /dev/loop0: 3.2 GiB, 3394400256 bytes, 6629688 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
┌─[user@parrot]─[~]
└──╼ $ 

但正如你所看到的,我被困在这里。

这是我以前用的 Parrot 操作系统,但更新后就不能正常启动了。

/dev/sdb7 1860888576 1936973823 76085248 36.3G 83 Linux

接下来做什么?

答案1

initramfs: fsck /dev/sda1

让机器做所有事情然后输入 exit

initramfs: exit

相关内容