我最近在这我的笔记本电脑屏幕支持 120hz,但显示配置它说它只支持 60hz。我试过 wayland 和 x11。
这是输出sudo get-edid | parse-edid
:
Attempting to use i2c interface
No EDID on bus 0
No EDID on bus 1
No EDID on bus 2
No EDID on bus 3
No EDID on bus 4
No EDID on bus 5
No EDID on bus 6
No EDID on bus 7
No EDID on bus 8
No EDID on bus 9
No EDID on bus 10
No EDID on bus 11
No EDID on bus 13
No EDID on bus 14
No EDID on bus 15
No EDID on bus 16
1 potential busses found: 12
256-byte EDID successfully retrieved from i2c bus 12
Looks like i2c was successful. Have a good day.
Checksum Correct
Section "Monitor"
Identifier ""
ModelName ""
VendorName "CSO"
# Monitor Manufactured week 0 of 2022
# EDID version 1.4
# Digital Display
DisplaySize 300 190
Gamma 2.20
Option "DPMS" "false"
Horizsync 229-229
VertRefresh 40-120
# Maximum pixel clock is 700MHz
#Extension block found. Parsing...
I only know about extension blocks of type 02h. PLEASE email me!
Something strange happened. Please contact the author,
Matthew Kern at <[email protected]>
编辑 1:每当我通过 X11 上的恢复模式启动时,它都会说 91hz 是唯一支持的刷新率。当我重新启动并正常启动时,我只能选择 60 hz。