%20%E5%92%8C%20(OfflineUncorrectableSector).png)
几个月来，我每天都会收到以下错误消息，我不知道如何停止接收这些消息。
CurrentPendingSector
This message was generated by the smartd daemon running on:
host name: myhost
DNS domain: [Empty]
The following warning/error was logged by the smartd daemon:
Device: /dev/sda [SAT], 6 Currently unreadable (pending) sectors
Device info:
KingFast, S/N:03112222C0002, FW:U0803A0, 256 GB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Fri Feb 3 19:41:29 2023 PST
Another message will be sent in 24 hours if the problem persists.
OfflineUncorrectableSector
This message was generated by the smartd daemon running on:
host name: myhost
DNS domain: [Empty]
The following warning/error was logged by the smartd daemon:
Device: /dev/sda [SAT], 3 Offline uncorrectable sectors
Device info:
KingFast, S/N:03112222C0002, FW:U0803A0, 256 GB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Fri Feb 3 19:41:29 2023 PST
Another message will be sent in 24 hours if the problem persists.
smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-46-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KingFast
Serial Number: 03112222C0002
Firmware Version: U0803A0
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 8 15:44:59 2023 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 6
9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 3335
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 440
160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3
161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 86
163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 26
164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 79004
165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 481
166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 6
167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 114
168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050
169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 98
175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 6
181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 88
194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 35
195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 3
197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 6
198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 3
199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0
232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 86
241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 168900
242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 815543
245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 191939
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3329 -
# 2 Short offline Completed without error 00% 3325 -
# 3 Short offline Completed without error 00% 3321 -
# 4 Short offline Completed without error 00% 3313 -
# 5 Short offline Completed without error 00% 3309 -
# 6 Short offline Completed without error 00% 3306 -
# 7 Extended offline Completed without error 00% 3250 -
# 8 Extended offline Completed without error 00% 3232 -
# 9 Extended offline Completed without error 00% 3229 -
#10 Extended offline Completed without error 00% 976 -
#11 Extended offline Completed without error 00% 968 -
Selective Self-tests/Logging not supported
我试图忽略197和中198的错误/etc/smartd.conf
/dev/sda -d removable -n standby -H -l error -l selftest -f -t -I 197 -I 198 -s (S/../.././(01|09|17)|L/../../3/11) -m root -M exec /usr/share/smartmontools/smartd-runner
无济于事。
LBA_of_first_error我在自我测试部分也没有看到任何内容。
在我看来，它看起来SMART overall-health self-assessment test result: PASSED是健康的，自检没有返回任何错误。我目前的理解是，磁盘看起来是健康的，但仍在错误地发送这些消息。
我是不是遗漏了什么？
该/dev/sda驱动器是 KingFast 256 GB SSD，我不确定这是否相关，因为我在网上找不到有关此特定驱动器或制造商的任何信息。
我怎样才能停止接收这些消息，但仍然使用 SMART 监控驱动器上的其他真正问题，如果此错误消息确实表明驱动器存在某些问题，我该如何修复该问题？
谢谢！
编辑：
我还运行了以下命令，我相信这些命令表明驱动器没有错误：
badblocks -sv /dev/sda
Checking blocks 0 to 250059095
Checking for bad blocks (read-only test): done
Pass completed, 0 bad blocks found. (0/0/0 errors)
dd if=/dev/sda of=/dev/null bs=64K conv=noerror
3907173+1 records in
3907173+1 records out
256060514304 bytes (256 GB, 238 GiB) copied, 485.648 s, 527 MB/s
答案1
我可以通过添加来隐藏这些消息-C 197+ -U 198+。我认为问题出在我的特定品牌的 SSD 上。