![Kubuntu 23.10 Ralink Technology, Corp. MT7601U 无线适配器无法工作](https://linux22.com/image/1032187/Kubuntu%2023.10%20Ralink%20Technology%2C%20Corp.%20MT7601U%20%E6%97%A0%E7%BA%BF%E9%80%82%E9%85%8D%E5%99%A8%E6%97%A0%E6%B3%95%E5%B7%A5%E4%BD%9C.png)
我安装了 Kubuntu 23.10,显然 mt7601u 的驱动程序已安装,但当您插入 USB 板(Ralink MT7601U (148f:7601) Wi-Fi 适配器)时,它不会将其纳入 Wifi 网络连接。我阅读了所有背景信息,但它们对我不起作用。t.ly/mTDpy 和其他。有什么想法吗?
lsb_release -a 没有可用的 LSB 模块。 分销商 ID:Ubuntu 描述:Ubuntu 23.10 发行版:23.10 代号:mantic
系统盘
Bus 002 Device 017: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 002 Device 016: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
inxi-Fxxxrz
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK P8 series driver: r8169 v: kernel pcie: speed: 2.5 GT/s
lanes: 1 port: e000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
Device-2: Ralink MT7601U Wireless Adapter driver: N/A type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 bus-ID: 2-1.5:16 chip-ID: 148f:7601 class-ID: 0000
serial: <filter>
ls -l /sys/bus/usb/drivers/ |grep mt7601u drwxr-xr-x 2 root root 0 ene 12 21:31 mt7601u
$ rfkill 列表
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
$ip 链接
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether e0:3f:49:56:11:13 brd ff:ff:ff:ff:ff:ff
7: wlx00231301e685: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DORMANT group default qlen 1000
link/ether 00:23:13:01:e6:85 brd ff:ff:ff:ff:ff:ff
sudo dmesg |grep mt
[12044.107310] mt7601u: probe of 2-1.5:1.0 failed with error -22
[15475.275479] mt7601u 2-1.5:1.0: ASIC revision: 76010001 MAC revision: 76010500
[15475.298829] mt7601u 2-1.5:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[15475.699693] mt7601u 2-1.5:1.0: Error: your device needs default EEPROM file and this driver doesn't support