我的系统开始出现异常,间歇性锁定。我看到以下消息syslog
:
Nov 18 22:22:00 claypool kernel: [ 3428.078156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Nov 18 22:22:00 claypool kernel: [ 3428.078163] ata3.00: irq_stat 0x40000000
Nov 18 22:22:00 claypool kernel: [ 3428.078167] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Nov 18 22:22:00 claypool kernel: [ 3428.078182] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Nov 18 22:22:00 claypool kernel: [ 3428.078184] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
Nov 18 22:22:00 claypool kernel: [ 3428.078188] ata3.00: status: { DRDY }
Nov 18 22:22:00 claypool kernel: [ 3428.080887] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Nov 18 22:22:00 claypool kernel: [ 3428.080890] ata3.00: irq_stat 0x40000000
Nov 18 22:22:00 claypool kernel: [ 3428.080893] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Nov 18 22:22:00 claypool kernel: [ 3428.080905] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Nov 18 22:22:00 claypool kernel: [ 3428.080906] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
Nov 18 22:22:00 claypool kernel: [ 3428.080910] ata3.00: status: { DRDY }
然后是这个:
Nov 18 23:13:56 claypool kernel: [ 6544.000798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 18 23:13:56 claypool kernel: [ 6544.000804] ata1.00: failed command: FLUSH CACHE EXT
Nov 18 23:13:56 claypool kernel: [ 6544.000814] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Nov 18 23:13:56 claypool kernel: [ 6544.000815] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
Nov 18 23:13:56 claypool kernel: [ 6544.000819] ata1.00: status: { DRDY }
Nov 18 23:13:56 claypool kernel: [ 6544.000825] ata1: hard resetting link
Nov 18 23:14:01 claypool kernel: [ 6549.360324] ata1: link is slow to respond, please be patient (ready=0)
Nov 18 23:14:06 claypool kernel: [ 6554.008091] ata1: COMRESET failed (errno=-16)
Nov 18 23:14:06 claypool kernel: [ 6554.008103] ata1: hard resetting link
Nov 18 23:14:11 claypool kernel: [ 6559.372246] ata1: link is slow to respond, please be patient (ready=0)
Nov 18 23:14:16 claypool kernel: [ 6564.020228] ata1: COMRESET failed (errno=-16)
Nov 18 23:14:16 claypool kernel: [ 6564.020235] ata1: hard resetting link
Nov 18 23:14:21 claypool kernel: [ 6569.380109] ata1: link is slow to respond, please be patient (ready=0)
Nov 18 23:14:31 claypool kernel: [ 6579.460243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 18 23:14:31 claypool kernel: [ 6579.486595] ata1.00: configured for UDMA/133
Nov 18 23:14:31 claypool kernel: [ 6579.486601] ata1.00: retrying FLUSH 0xea Emask 0x4
Nov 18 23:14:31 claypool kernel: [ 6579.486939] ata1.00: device reported invalid CHS sector 0
Nov 18 23:14:31 claypool kernel: [ 6579.486952] ata1: EH complete
Nov 18 23:17:01 claypool CRON[3910]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Nov 18 23:17:01 claypool CRON[3908]: (CRON) error (grandchild #3910 failed with exit status 1)
Nov 18 23:17:01 claypool postfix/sendmail[3925]: fatal: open /etc/postfix/main.cf: No such file or directory
Nov 18 23:17:01 claypool CRON[3908]: (root) MAIL (mailed 1 byte of output; but got status 0x004b, #012)
Nov 18 23:39:01 claypool CRON[4200]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
23:39 之后没有标记任何消息。当我下次尝试使用机器时,它不会从屏幕保护程序(空白屏幕)返回,也不会切换到另一个终端,我不得不硬重启它。
[更新] 的输出smartctl
是这里。我很难获得它,因为/
它以只读方式安装(?!),这会阻止大多数应用程序运行。
此外,它可能没有关系,但我有以下令人担忧的消息dmesg
:
[ 10.084596] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.098477] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 10.098483] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [??? 0x00000700-0x0000073f flags 0x30]
[ 10.098486] ACPI: This conflict may cause random problems and system instability
[ 10.098487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.098509] i2c i2c-1: nForce2 SMBus adapter at 0x700
[ 10.112570] Linux agpgart interface v0.103
[ 10.155329] atk: Resources not safely usable due to acpi_enforce_resources kernel parameter
[ 10.161506] it87: Found IT8712F chip at 0x290, revision 8
[ 10.161517] it87: VID is disabled (pins used for GPIO)
[ 10.161527] it87: in3 is VCC (+5V)
[ 10.161528] it87: in7 is VCCH (+5V Stand-By)
[ 10.161560] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [??? 0x00000290-0x000002af flags 0x45]
[ 10.161562] ACPI: This conflict may cause random problems and system instability
[ 10.161564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[更新 2] 我按照 Phil 的建议换了一条新的 SATA 线。smartctl 的当前输出是这里,如果有帮助的话。
[更新 3] 我不认为电缆能解决问题。系统尚未锁定,但我的媒体播放器几分钟前崩溃了,并且我在 中看到以下内容syslog
:
Nov 20 16:07:17 claypool kernel: [ 2294.400033] ata1: link is slow to respond, please be patient (ready=0)
Nov 20 16:07:47 claypool kernel: [ 2324.084581] ata1: COMRESET failed (errno=-16)
Nov 20 16:07:47 claypool kernel: [ 2324.084588] ata1: limiting SATA link speed to 1.5 Gbps
Nov 20 16:07:47 claypool kernel: [ 2324.084592] ata1: hard resetting link
我收到以下回复smartctl
:
$ sudo smartctl -a /dev/sda
[sudo] password for chris:
sudo: Can't open /var/lib/sudo/chris/0: Read-only file system
smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Device: /0:0:0:0 Version:
scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
答案1
不要忘记,您用来安装 Ubuntu 的 Live CD(或 Live USB)系统也是一个功能齐全的环境,不依赖于您的硬盘。您可以从安装光盘启动并访问您可能需要的任何程序来调查问题。如果我怀疑硬盘有问题,我的首要任务是从 Live CD 或 USB 驱动器启动并备份硬盘上的所有关键数据。然后我使用实时系统上的工具来诊断问题。
答案2
这似乎是硬盘故障。更换电缆没有解决问题。“重新分配的扇区数”远远smartctl
高于阈值,这是故障前指标。幸运的是,我有备份,仍然可以从磁盘读取以复制旧数据。
答案3
我最近遇到了这个错误。原来是连接硬盘和主板的 SATA 电缆出了问题。买了两条新的,过去一周一直运行良好。
另外,在“系统”->“管理”->“磁盘实用程序”中检查驱动器的 SMART 数据。它可能会告诉你它失败的原因。我的电缆问题报告没有