OpenSUSE 有线连接可以工作,但 WiFi 不能连接

OpenSUSE 有线连接可以工作,但 WiFi 不能连接

我可以使用有线连接在 OpenSUSE 上连接到 Internet。我可以连接到无线网络并访问 Google,但无法访问其他网站。

我不知道从哪里开始。我尝试过谷歌搜索,但我找到的所有内容都是 5-6 年前的论坛帖子,我怀疑它们是否相关。

我安装了 OpenSUSE Tumbleweed。我有一台大约 2014 年生产的三星笔记本电脑。

这是我的无线卡信息:

linux-dfyi:~ # hwinfo --wlan
13: PCI 100.0: 0282 WLAN controller                             
  [Created at pci.378]
  Unique ID: yWPJ.kQy5U_ZUp+C
  Parent ID: z8Q3.SQ434Dh94vE
  SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: network
  Model: "Intel Centrino Advanced-N 6235 AGN"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x088e "Centrino Advanced-N 6235"
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x4060 "Centrino Advanced-N 6235 AGN"
  Revision: 0x24
  Driver: "iwlwifi"
  Driver Modules: "iwlwifi"
  Device File: wlp1s0
  Features: WLAN
  Memory Range: 0xf7c00000-0xf7c01fff (rw,non-prefetchable)
  IRQ: 29 (no events)
  HW Address: fe:fb:db:90:37:00
  Permanent HW Address: c4:d9:87:09:0d:71
  Link detected: no
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v00008086d0000088Esv00008086sd00004060bc02sc80i00"
  Driver Info #0:
    Driver Status: iwlwifi is active
    Driver Activation Cmd: "modprobe iwlwifi"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #9 (PCI bridge)

风滚草版本:

NAME="openSUSE Tumbleweed"
# VERSION="20170729"
ID=opensuse
ID_LIKE="suse"
VERSION_ID="20170729"
PRETTY_NAME="openSUSE Tumbleweed"
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:tumbleweed:20170729"

任何帮助,将不胜感激!我不知道从哪里开始,但准备好学习!

答案1

您未连接到无线网络。 ( Link detected: no)。 “Google”页面已离线缓存。

尝试打开无线硬件。如果您的笔记本电脑上有开关,请打开开关。当无线硬件“打开”时,使用右下角的系统托盘选择 WiFi 网络并输入密码。

PS:最好的做法是使用“sudo”从非特权帐户输入管理命令。

相关内容