我的 U 盘有问题,我需要其中的数据,但是……:
lsusb
(几分钟后就再也看不到它了):总线 002 设备 023:ID 0951:1642 金士顿科技 DT101 G2
dmesg | grep sd
-> 没有看到,所以我只使用了dmesg
:[ 4293.962452] usb-storage 2-1:1.0: USB Mass Storage device detected [ 4293.963549] scsi11 : usb-storage 2-1:1.0 [ 4315.984032] usb 2-1: reset high-speed USB device number 18 using ehci-pci [ 4331.096037] usb 2-1: device descriptor read/64, error -110 [ 4346.312045] usb 2-1: device descriptor read/64, error -110 [ 4346.528035] usb 2-1: reset high-speed USB device number 18 using ehci-pci [ 4361.640034] usb 2-1: device descriptor read/64, error -110 [ 4376.856035] usb 2-1: device descriptor read/64, error -110 [ 4377.072046] usb 2-1: reset high-speed USB device number 18 using ehci-pci [ 4387.480025] usb 2-1: device not accepting address 18, error -110 [ 4387.592034] usb 2-1: reset high-speed USB device number 18 using ehci-pci [ 4398.000024] usb 2-1: device not accepting address 18, error -110 [ 4398.000100] usb 2-1: USB disconnect, device number 18 [ 4398.000186] scsi 11:0:0:0: Device offlined - not ready after error recovery [ 4398.112038] usb 2-1: new high-speed USB device number 19 using ehci-pci [ 4413.224038] usb 2-1: device descriptor read/64, error -110 [ 4428.440053] usb 2-1: device descriptor read/64, error -110 [ 4428.656039] usb 2-1: new high-speed USB device number 20 using ehci-pci [ 4443.768042] usb 2-1: device descriptor read/64, error -110 [ 4458.984057] usb 2-1: device descriptor read/64, error -110 [ 4459.200038] usb 2-1: new high-speed USB device number 21 using ehci-pci [ 4469.608032] usb 2-1: device not accepting address 21, error -110 [ 4469.720042] usb 2-1: new high-speed USB device number 22 using ehci-pci [ 4480.128018] usb 2-1: device not accepting address 22, error -110 [ 4480.128053] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 4480.392037] usb 6-1: new full-speed USB device number 10 using uhci_hcd [ 4495.708037] usb 6-1: device descriptor read/64, error -110 [ 4510.924046] usb 6-1: device descriptor read/64, error -110 [ 4511.140028] usb 6-1: new full-speed USB device number 11 using uhci_hcd
fdisk
也没看到- 我用 petrol 清洁了 pendrive - 它可以工作(Windows 8 已经看到了它 - 但是它的驱动程序存在问题...)
答案1
根据dmesg
摘录,列表中的设备消失lsusb
,以及 Windows 报告的驱动程序问题,您的 USB 驱动器已彻底损坏。优秀的数据恢复技术人员可能能够挽救其中的数据,因为通常只有 USB 接口芯片损坏,而不是闪存或其控制器。