你好,早上好,我有一个无法解决的问题。我一直在寻找一些可能的解决方案,但并没有弄清楚。我的问题如下,我的电脑机箱后面有两个音频输出,后面的前面工作正常,但前面我无法让它工作。然后我找到了我认为有用的所有信息,如果有人能指导我解决问题,我提前谢谢您。
命令的输出:lspci | grep Audio
00: 1b.0 Audio device: Intel Corporation 8 Series / C220 Series High Definition Audio Controller Chipset (rev 05)
01: 00.1 Audio device: Advanced Micro Devices, Inc. [AMD / ATI] Cape Verde / Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
在 Alsamixer 中我可以看到以下信息:
Card: HDA Intel PCH
Chip: IDT 92HD89E2
在 alsamixer 中也是如此,在系统信息中:
/ Proc / asound / cards
0 [PCH]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7f10000 irq 31
/ Proc / asound / devices
Sequencer
2: [1]: control
3: [1- 3]: digital audio playback
4: [1-7]: digital audio playback
5: [1-8]: digital audio playback
6: [1- 9]: digital audio playback
7: [1-10]: digital audio playback
8: [1-11]: digital audio playback
9: [1- 0]: hardware dependent
10: [0]: control
11: [0- 0]: digital audio playback
12: [0- 0]: digital audio capture
13: [0- 1]: digital audio playback
14: [0- 2]: digital audio capture
15: [0-0]: hardware dependent
33: timer
/ Proc / asound / pcm
00-00: 92HD89E2 Analog: 92HD89E2 Analog: playback 1: capture 1
00-01: 92HD89E2 Digital: 92HD89E2 Digital: playback 1
00-02: 92HD89E2 Alt Analog: 92HD89E2 Alt Analog: capture 1
至于我在 Alsamixer 中获得的不同控制,有以下几点:
<Master> PCM Front Surround Center LFE Side Line Line Boo Line Boo Mic Boos Mic Boos S / PDIF S / PDIF D Beep Capture Capture Digital Input So Input So Loopback
命令输出:aplay -l
**** List of PLAYBACK hardware devices ****
Card 0: PCH [HDA Intel PCH], device 0: 92HD89E2 Analog [92HD89E2 Analog]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
Card 0: PCH [HDA Intel PCH], device 1: 92HD89E2 Digital [92HD89E2 Digital]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
Card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
Card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
Card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
Card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
Card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
Card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
Sub devices: 1/1
Subdevice # 0: subdevice # 0
命令的输出:pacmd list
答案1
在(的输出)下方pacmd list-cards
,剪辑了部分我的声卡。
index: 3
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 9
properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 34"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#2: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#3: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#4: Built-in Audio Analog Stereo
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"