![Ubuntu 14.04 和最新支持的 AMD Catalyst 14.6 Beta 驱动程序 (fglrx) 间歇性挂起系统 - 稳定性不可靠](https://linux22.com/image/1103246/Ubuntu%2014.04%20%E5%92%8C%E6%9C%80%E6%96%B0%E6%94%AF%E6%8C%81%E7%9A%84%20AMD%20Catalyst%2014.6%20Beta%20%E9%A9%B1%E5%8A%A8%E7%A8%8B%E5%BA%8F%20(fglrx)%20%E9%97%B4%E6%AD%87%E6%80%A7%E6%8C%82%E8%B5%B7%E7%B3%BB%E7%BB%9F%20-%20%E7%A8%B3%E5%AE%9A%E6%80%A7%E4%B8%8D%E5%8F%AF%E9%9D%A0.png)
自从在 AMD64 系统上升级到 Ubuntu GNOME 14.04(带有 Radeon R9 290X 显卡)并安装官方 AMD Catalyst 14.6 Beta 驱动程序后,我的系统可靠性就受到了影响。它现在会间歇性地挂起最新的桌面系统(在 Ubuntu 14.04 上安装最新的官方测试版 Catalyst 驱动程序来设置显卡之前不会出现这种情况 - 而且在安装支持 Ubuntu 12.04.5 的先前最新 Catalyst Beta 驱动程序的 Ubuntu 12.04.5 版本时也不会出现这种情况)。有时桌面系统会锁定(硬挂起)并需要关闭电源,但有时系统会重新启动并正常启动,并显示 GDM 以供 GNOME 桌面登录。
这是驱动程序问题还是 X11 问题?我应该怎么做才能获得更多诊断信息?建议进行哪些测试以排除驱动程序故障?
请查看我的配置/日志...
$ lspci | grep -i vga
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS780L [Radeon 3000]
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT [Radeon R9 290X]
$ sudo grep fglrx /var/log/syslog
Oct 24 15:00:21 linexus kernel: [ 11.761650] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7503 MBytes.
Oct 24 15:00:21 linexus kernel: [ 11.761865] <6>[fglrx] vendor: 1002 device: 67b0 count: 1
Oct 24 15:00:21 linexus kernel: [ 11.762565] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
Oct 24 15:00:21 linexus kernel: [ 11.762799] <6>[fglrx] Kernel PAT support is enabled
Oct 24 15:00:21 linexus kernel: [ 11.762815] <6>[fglrx] module loaded - fglrx 14.20.7 [May 29 2014] with 1 minors
Oct 24 15:00:24 linexus kernel: [ 14.134971] fglrx_pci 0000:02:00.0: irq 44 for MSI/MSI-X
Oct 24 15:00:24 linexus kernel: [ 14.135698] <6>[fglrx] Firegl kernel thread PID: 1808
Oct 24 15:00:24 linexus kernel: [ 14.135788] <6>[fglrx] Firegl kernel thread PID: 1809
Oct 24 15:00:24 linexus kernel: [ 14.135854] <6>[fglrx] Firegl kernel thread PID: 1810
Oct 24 15:00:24 linexus kernel: [ 14.135975] <6>[fglrx] IRQ 44 Enabled
Oct 24 15:00:24 linexus kernel: [ 14.166286] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
Oct 24 15:00:24 linexus kernel: [ 14.166288] <6>[fglrx] Reserved FB block: Unshared offset:f738000, size:4000
Oct 24 15:00:24 linexus kernel: [ 14.166290] <6>[fglrx] Reserved FB block: Unshared offset:f73c000, size:4c4000
Oct 24 15:00:24 linexus kernel: [ 14.166291] <6>[fglrx] Reserved FB block: Unshared offset:fc00000, size:100000
Oct 24 15:00:24 linexus kernel: [ 14.166292] <6>[fglrx] Reserved FB block: Unshared offset:ffff4000, size:c000
$ sudo cat /var/log/Xorg.0.log
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 13.905] X Protocol Version 11, Revision 0
[ 13.905] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[ 13.905] Current Operating System: Linux linexus 3.13.0-37-generic #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 x86_64
[ 13.905] Kernel command line: BOOT_IMAGE=/ROOT/ubuntu-1@/boot/vmlinuz-3.13.0-37-generic root=ZFS=rpool/ROOT/ubuntu-1 ro boot=zfs
[ 13.905] Build Date: 30 July 2014 12:21:54AM
[ 13.905] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support)
[ 13.905] Current version of pixman: 0.30.2
[ 13.905] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.905] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.905] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 24 16:29:52 2014
[ 13.905] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.905] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.908] (==) ServerLayout "aticonfig Layout"
[ 13.908] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 13.908] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 13.908] (**) | |-->Device "aticonfig-Device[0]-0"
[ 13.908] (==) Automatically adding devices
[ 13.908] (==) Automatically enabling devices
[ 13.908] (==) Automatically adding GPU devices
...
[ 13.909] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 13.909] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.909] (II) Loader magic: 0x7fb8bfbb7d40
[ 13.909] (II) Module ABI versions:
[ 13.909] X.Org ANSI C Emulation: 0.4
[ 13.909] X.Org Video Driver: 15.0
[ 13.909] X.Org XInput driver : 20.0
[ 13.909] X.Org Server Extension : 8.0
[ 13.910] (--) PCI:*(0:1:5:0) 1002:9616:1043:8388 rev 0, Mem @ 0xb0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000c000/256
[ 13.910] (--) PCI: (0:2:0:0) 1002:67b0:1002:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xcf800000/8388608, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 13.910] Initializing built-in extension Generic Event Extension
[ 13.910] Initializing built-in extension SHAPE
[ 13.910] Initializing built-in extension MIT-SHM
[ 13.910] Initializing built-in extension XInputExtension
[ 13.910] Initializing built-in extension XTEST
[ 13.910] Initializing built-in extension BIG-REQUESTS
[ 13.910] Initializing built-in extension SYNC
[ 13.910] Initializing built-in extension XKEYBOARD
[ 13.910] Initializing built-in extension XC-MISC
[ 13.910] Initializing built-in extension SECURITY
[ 13.910] Initializing built-in extension XINERAMA
[ 13.910] Initializing built-in extension XFIXES
[ 13.910] Initializing built-in extension RENDER
[ 13.911] Initializing built-in extension RANDR
[ 13.911] Initializing built-in extension COMPOSITE
[ 13.911] Initializing built-in extension DAMAGE
[ 13.911] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.911] Initializing built-in extension DOUBLE-BUFFER
[ 13.911] Initializing built-in extension RECORD
[ 13.911] Initializing built-in extension DPMS
[ 13.911] Initializing built-in extension Present
[ 13.911] Initializing built-in extension DRI3
[ 13.911] Initializing built-in extension X-Resource
[ 13.911] Initializing built-in extension XVideo
[ 13.911] Initializing built-in extension XVideo-MotionCompensation
[ 13.911] Initializing built-in extension SELinux
[ 13.911] Initializing built-in extension XFree86-VidModeExtension
[ 13.911] Initializing built-in extension XFree86-DGA
[ 13.911] Initializing built-in extension XFree86-DRI
[ 13.911] Initializing built-in extension DRI2
[ 13.911] (II) "glx" will be loaded by default.
[ 13.911] (WW) "xmir" is not to be loaded by default. Skipping.
[ 13.911] (II) LoadModule: "glx"
[ 13.911] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[ 13.918] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 13.918] compiled for 6.9.0, module version = 1.0.0
[ 13.918] Loading extension GLX
[ 13.918] (II) LoadModule: "fglrx"
[ 13.918] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 14.020] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 14.020] compiled for 1.4.99.906, module version = 14.20.7
[ 14.021] Module class: X.Org Video Driver
[ 14.022] (II) Loading sub module "fglrxdrm"
[ 14.022] (II) LoadModule: "fglrxdrm"
[ 14.022] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 14.025] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 14.025] compiled for 1.4.99.906, module version = 14.20.7
[ 14.025] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 14.025] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.20
[ 14.025] (II) AMD Proprietary Linux Driver Build Date: May 29 2014 10:25:55
[ 14.025] (++) using VT number 7
[ 14.042] (WW) Falling back to old probe method for fglrx
[ 14.063] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 14.066] ukiDynamicMajor: found major device number 250
[ 14.066] ukiDynamicMajor: found major device number 250
[ 14.066] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 14.066] ukiOpenDevice: node name is /dev/ati/card0
[ 14.066] ukiOpenDevice: open result is 9, (OK)
[ 14.356] ukiOpenByBusid: ukiOpenMinor returns 9
[ 14.356] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 14.379] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:0) found
[ 14.379] (--) Chipset Supported AMD Graphics Processor (0x67B0) found
...
[ 14.381] (II) fglrx(0): pEnt->device->identifier=0x7fb8c114e4c0
[ 14.381] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 14.381] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 14.381] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 14.381] (==) fglrx(0): Default visual is TrueColor
[ 14.381] (**) fglrx(0): Option "DPMS" "true"
[ 14.381] (==) fglrx(0): RGB weight 888
[ 14.381] (II) fglrx(0): Using 8 bits per RGB
[ 14.382] (==) fglrx(0): Buffer Tiling is ON
[ 14.382] (II) Loading sub module "fglrxdrm"
[ 14.382] (II) LoadModule: "fglrxdrm"
[ 14.382] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 14.382] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 14.382] compiled for 1.4.99.906, module version = 14.20.7
[ 14.384] ukiDynamicMajor: found major device number 250
[ 14.384] ukiDynamicMajor: found major device number 250
[ 14.384] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 14.384] ukiOpenDevice: node name is /dev/ati/card0
[ 14.384] ukiOpenDevice: open result is 11, (OK)
[ 14.384] ukiOpenByBusid: ukiOpenMinor returns 11
[ 14.384] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 14.384] (**) fglrx(0): NoAccel = NO
[ 14.384] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 14.384] (--) fglrx(0): Chipset: "AMD Radeon R9 200 Series" (Chipset = 0x67b0)
[ 14.384] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0b00)
[ 14.384] (==) fglrx(0): board vendor info: original AMD graphics adapter
[ 14.384] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 14.384] (--) fglrx(0): MMIO registers at 0xfeac0000
[ 14.384] (--) fglrx(0): I/O port at 0x0000d000
[ 14.384] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 14.387] (II) fglrx(0): AC Adapter is used
[ 14.387] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 14.387] (--) fglrx(0): Video RAM: 4194304 kByte, Type: GDDR5
[ 14.387] (II) fglrx(0): PCIE card detected
[ 14.387] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 14.387] (II) fglrx(0): board/chipset is supported by this driver (original AMD board)
[ 14.387] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x100000000)
[ 14.387] (II) fglrx(0): RandR 1.2 support is enabled!
[ 14.387] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 14.387] (II) Loading sub module "fb"
[ 14.387] (II) LoadModule: "fb"
[ 14.388] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.391] (II) Module fb: vendor="X.Org Foundation"
[ 14.391] compiled for 1.15.1, module version = 1.0.0
[ 14.391] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.391] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 14.391] (II) Loading sub module "ddc"
[ 14.391] (II) LoadModule: "ddc"
[ 14.391] (II) Module "ddc" already built-in
[ 14.480] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 14.480] (II) fglrx(0): Output DFP2 has no monitor section
[ 14.480] (II) fglrx(0): Output DFP3 has no monitor section
[ 14.480] (II) fglrx(0): Output DFP4 has no monitor section
[ 14.480] (II) fglrx(0): Output DFP5 has no monitor section
[ 14.480] (II) fglrx(0): Output DFP6 has no monitor section
[ 14.480] (II) fglrx(0): Output DFP7 has no monitor section
[ 14.480] (II) Loading sub module "ddc"
[ 14.480] (II) LoadModule: "ddc"
[ 14.480] (II) Module "ddc" already built-in
[ 14.480] (II) fglrx(0): Connected Display0: DFP7
[ 14.480] (II) fglrx(0): Display0 EDID data ---------------------------
[ 14.481] (II) fglrx(0): Manufacturer: DEL Model: a08d Serial#: 826493516
[ 14.481] (II) fglrx(0): Year: 2013 Week: 14
[ 14.481] (II) fglrx(0): EDID Version: 1.3
[ 14.481] (II) fglrx(0): Digital Display Input
[ 14.481] (II) fglrx(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 14.481] (II) fglrx(0): Gamma: 2.20
[ 14.481] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 14.481] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.481] (II) fglrx(0): First detailed timing is preferred mode
[ 14.481] (II) fglrx(0): redX: 0.640 redY: 0.338 greenX: 0.315 greenY: 0.623
[ 14.481] (II) fglrx(0): blueX: 0.151 blueY: 0.063 whiteX: 0.313 whiteY: 0.329
[ 14.481] (II) fglrx(0): Supported established timings:
[ 14.481] (II) fglrx(0): 720x400@70Hz
[ 14.481] (II) fglrx(0): 640x480@60Hz
[ 14.481] (II) fglrx(0): 640x480@75Hz
[ 14.481] (II) fglrx(0): 800x600@60Hz
[ 14.481] (II) fglrx(0): 800x600@75Hz
[ 14.481] (II) fglrx(0): 1024x768@60Hz
[ 14.481] (II) fglrx(0): 1024x768@75Hz
[ 14.481] (II) fglrx(0): 1280x1024@75Hz
[ 14.481] (II) fglrx(0): Manufacturer's mask: 0
[ 14.481] (II) fglrx(0): Supported standard timings:
[ 14.481] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 14.481] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.481] (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 14.481] (II) fglrx(0): Supported detailed timing:
[ 14.481] (II) fglrx(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 14.481] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 14.481] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 14.481] (II) fglrx(0): Serial No: P7D0G3411CJL
[ 14.481] (II) fglrx(0): Monitor name: DELL S2740L
[ 14.481] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 14.481] (II) fglrx(0): EDID (in hex):
[ 14.481] (II) fglrx(0): 00ffffffffffff0010ac8da04c4a4331
[ 14.481] (II) fglrx(0): 0e170103803c2278eaeed5a356509f26
[ 14.481] (II) fglrx(0): 105054a54b00714f8180d1c001010101
[ 14.481] (II) fglrx(0): 010101010101023a801871382d40582c
[ 14.481] (II) fglrx(0): 450056502100001e000000ff00503744
[ 14.482] (II) fglrx(0): 304733343131434a4c0a000000fc0044
[ 14.482] (II) fglrx(0): 454c4c2053323734304c0a20000000fd
[ 14.482] (II) fglrx(0): 00384c1e5311000a20202020202000b4
[ 14.482] (II) fglrx(0): End of Display0 EDID data --------------------
[ 14.482] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 14.482] (II) fglrx(0): EDID for output DFP1
[ 14.482] (II) fglrx(0): EDID for output DFP2
[ 14.482] (II) fglrx(0): EDID for output DFP3
[ 14.482] (II) fglrx(0): EDID for output DFP4
[ 14.482] (II) fglrx(0): EDID for output DFP5
[ 14.482] (II) fglrx(0): EDID for output DFP6
[ 14.482] (II) fglrx(0): EDID for output DFP7
[ 14.482] (II) fglrx(0): Manufacturer: DEL Model: a08d Serial#: 826493516
[ 14.482] (II) fglrx(0): Year: 2013 Week: 14
[ 14.482] (II) fglrx(0): EDID Version: 1.3
[ 14.482] (II) fglrx(0): Digital Display Input
[ 14.482] (II) fglrx(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 14.482] (II) fglrx(0): Gamma: 2.20
[ 14.482] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 14.482] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.482] (II) fglrx(0): First detailed timing is preferred mode
[ 14.482] (II) fglrx(0): redX: 0.640 redY: 0.338 greenX: 0.315 greenY: 0.623
[ 14.483] (II) fglrx(0): blueX: 0.151 blueY: 0.063 whiteX: 0.313 whiteY: 0.329
[ 14.483] (II) fglrx(0): Supported established timings:
[ 14.483] (II) fglrx(0): 720x400@70Hz
[ 14.483] (II) fglrx(0): 640x480@60Hz
[ 14.483] (II) fglrx(0): 640x480@75Hz
[ 14.483] (II) fglrx(0): 800x600@60Hz
[ 14.483] (II) fglrx(0): 800x600@75Hz
[ 14.483] (II) fglrx(0): 1024x768@60Hz
[ 14.483] (II) fglrx(0): 1024x768@75Hz
[ 14.483] (II) fglrx(0): 1280x1024@75Hz
[ 14.483] (II) fglrx(0): Manufacturer's mask: 0
[ 14.483] (II) fglrx(0): Supported standard timings:
[ 14.483] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 14.483] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.483] (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 14.483] (II) fglrx(0): Supported detailed timing:
[ 14.483] (II) fglrx(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 14.483] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 14.483] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 14.483] (II) fglrx(0): Serial No: P7D0G3411CJL
[ 14.483] (II) fglrx(0): Monitor name: DELL S2740L
[ 14.483] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 14.483] (II) fglrx(0): EDID (in hex):
[ 14.483] (II) fglrx(0): 00ffffffffffff0010ac8da04c4a4331
[ 14.483] (II) fglrx(0): 0e170103803c2278eaeed5a356509f26
[ 14.483] (II) fglrx(0): 105054a54b00714f8180d1c001010101
[ 14.483] (II) fglrx(0): 010101010101023a801871382d40582c
[ 14.483] (II) fglrx(0): 450056502100001e000000ff00503744
[ 14.483] (II) fglrx(0): 304733343131434a4c0a000000fc0044
[ 14.483] (II) fglrx(0): 454c4c2053323734304c0a20000000fd
[ 14.483] (II) fglrx(0): 00384c1e5311000a20202020202000b4
[ 14.483] (II) fglrx(0): Printing probed modes for output DFP7
[ 14.483] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 14.483] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 14.483] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 14.483] (II) fglrx(0): Modeline "1600x900"x60.0 148.50 1600 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1152x864"x60.0 148.50 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 14.484] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.484] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.484] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.484] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.484] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.484] (II) fglrx(0): Output DFP1 disconnected
[ 14.484] (II) fglrx(0): Output DFP2 disconnected
[ 14.484] (II) fglrx(0): Output DFP3 disconnected
[ 14.484] (II) fglrx(0): Output DFP4 disconnected
[ 14.484] (II) fglrx(0): Output DFP5 disconnected
[ 14.484] (II) fglrx(0): Output DFP6 disconnected
[ 14.484] (II) fglrx(0): Output DFP7 connected
[ 14.484] (II) fglrx(0): Using exact sizes for initial modes
[ 14.484] (II) fglrx(0): Output DFP7 using initial mode 1920x1080
[ 14.484] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 14.484] (II) fglrx(0): DPI set to (96, 96)
[ 14.484] (II) fglrx(0): Eyefinity capable adapter detected.
[ 14.484] (II) fglrx(0): Adapter AMD Radeon R9 200 Series has 6 configurable heads and 1 displays connected.
[ 14.484] (==) fglrx(0): PseudoColor visuals disabled
[ 14.485] (II) Loading sub module "ramdac"
[ 14.485] (II) LoadModule: "ramdac"
[ 14.485] (II) Module "ramdac" already built-in
[ 14.485] (==) fglrx(0): NoDRI = NO
[ 14.485] (==) fglrx(0): Capabilities: 0x00000000
[ 14.485] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 14.485] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 14.485] (==) fglrx(0): UseFastTLS=0
[ 14.485] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 14.485] (--) Depth 24 pixmap format is 32 bpp
[ 14.485] Loading extension ATIFGLRXDRI
[ 14.485] (II) fglrx(0): doing swlDriScreenInit
[ 14.485] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 14.485] ukiDynamicMajor: found major device number 250
[ 14.485] ukiDynamicMajor: found major device number 250
[ 14.485] ukiDynamicMajor: found major device number 250
[ 14.485] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 14.485] ukiOpenDevice: node name is /dev/ati/card0
[ 14.485] ukiOpenDevice: open result is 12, (OK)
[ 14.485] ukiOpenByBusid: ukiOpenMinor returns 12
[ 14.485] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 14.485] (II) fglrx(0): [uki] DRM interface version 1.0
[ 14.485] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 14.485] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 14.485] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fb8bf77b000
[ 14.485] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 14.485] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 14.485] (II) fglrx(0): swlDriScreenInit done
[ 14.485] (II) fglrx(0): Kernel Module Version Information:
[ 14.485] (II) fglrx(0): Name: fglrx
[ 14.485] (II) fglrx(0): Version: 14.20.7
[ 14.486] (II) fglrx(0): Date: May 29 2014
[ 14.486] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 14.486] (II) fglrx(0): Kernel Module version matches driver.
[ 14.486] (II) fglrx(0): Kernel Module Build Time Information:
[ 14.486] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.13.0-37-generic
[ 14.486] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 14.486] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 14.486] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 14.486] (II) fglrx(0): [uki] register handle = 0x00004000
[ 14.490] (II) fglrx(0): DRI initialization successfull
[ 14.490] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
[ 14.491] (==) fglrx(0): Backing store enabled
[ 14.491] Loading extension FGLRXEXTENSION
[ 14.491] (**) fglrx(0): DPMS enabled
[ 14.491] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 14.491] (**) fglrx(0): Textured Video is enabled.
[ 14.491] (II) LoadModule: "glesx"
[ 14.491] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/glesx.so
[ 14.528] (II) Module glesx: vendor="X.Org Foundation"
[ 14.528] compiled for 1.4.99.906, module version = 1.0.0
[ 14.528] Loading extension GLESX
[ 14.528] (II) fglrx(0): GLESX enableFlags = 8784
[ 14.529] (II) fglrx(0): GLESX is enabled
[ 14.529] (II) LoadModule: "amdxmm"
[ 14.529] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/amdxmm.so
[ 14.532] (II) Module amdxmm: vendor="X.Org Foundation"
[ 14.532] compiled for 1.4.99.906, module version = 2.0.0
[ 14.535] Loading extension AMDXVOPL
[ 14.535] Loading extension AMDXVBA
[ 14.535] (II) fglrx(0): Enable composite support successfully
[ 14.536] (WW) fglrx(0): Option "VendorName" is not used
[ 14.536] (WW) fglrx(0): Option "ModelName" is not used
[ 14.536] (II) fglrx(0): X context handle = 0x1
[ 14.536] (II) fglrx(0): [DRI] installation complete
[ 14.536] (==) fglrx(0): Silken mouse enabled
[ 14.537] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 14.538] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.578] (--) RandR disabled
[ 14.582] (II) SELinux: Disabled on system
[ 14.583] ukiDynamicMajor: found major device number 250
[ 14.583] ukiDynamicMajor: found major device number 250
[ 14.583] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 14.583] ukiOpenDevice: node name is /dev/ati/card0
[ 14.583] ukiOpenDevice: open result is 13, (OK)
[ 14.583] ukiOpenByBusid: ukiOpenMinor returns 13
[ 14.583] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 14.584] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 14.584] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 14.584] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 14.715] ukiDynamicMajor: found major device number 250
[ 14.715] ukiDynamicMajor: found major device number 250
[ 14.715] ukiDynamicMajor: found major device number 250
[ 14.715] ukiOpenDevice: node name is /dev/ati/card0
[ 14.715] ukiOpenDevice: open result is 14, (OK)
[ 14.715] ukiGetBusid returned 'PCI:2:0:0'
[ 14.715] ukiOpenDevice: node name is /dev/ati/card1
[ 14.715] ukiOpenDevice: open result is -1, (No such device)
[ 14.715] ukiOpenDevice: open result is -1, (No such device)
[ 14.715] ukiOpenDevice: Open failed
[ 14.715] ukiOpenDevice: node name is /dev/ati/card2
[ 14.715] ukiOpenDevice: open result is -1, (No such device)
[ 14.715] ukiOpenDevice: open result is -1, (No such device)
[ 14.715] ukiOpenDevice: Open failed
...