可能重复:
显卡,这样我就可以有 4 个显示器
我刚刚使用我之前的硬件设置安装了 ubuntu 11.10:4 台显示器和 2 个相同的 nvidia 显卡。
在所有 4 个显示器上拖动窗口效果很好,但当我最大化窗口时,它总是扩展到 2 个屏幕上。(2x 双视图)。
我在 11.04 中找到了解决方法,但我记不清是什么了……你们中有人可以启动并运行四台显示器,并且只在一个屏幕上最大化窗口吗
我的 xorg.conf 如下所示:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011
Section "ServerLayout"
# Removed Option "Xinerama" "1"
# Removed Option "Xinerama" "0"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 0 1080
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SMB2220N"
HorizSync 31.0 - 80.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Samsung SMB2220N"
HorizSync 31.0 - 80.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
# Removed Option "TwinView" "True"
# Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "TwinView" "True"
# Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
答案1
问题是不要使用双屏视图。使用双屏视图时,窗口系统会将您的屏幕识别为两个显示器的总和并采取相应的行动。全屏应用程序也会以这种方式跨越两个屏幕。
运行sudo nvidia-settings
并禁用双视图。