我无法让我的佳能 CanoScan 9000F Mark II 在 ubuntu 14.04 64bit 上运行。
sane-find-scanner
和
sudo sane-find-scanner
都产生：
found USB scanner (vendor=0x04a9 [Canon], product=0x190d [CanoScan]) at libusb:001:018
打字
scanimage -L
和 sudo scanimage -L
都产生：
device `pixma:04A9190D' is a CANON Canoscan 9000F Mark II multi-function peripheral
打字
scanimage -T
和 sudo scanimage -T
两者都使扫描仪启动，并且都产生
scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes... PASS
scanimage: reading one byte... PASS
scanimage: stepped read, 2 bytes... PASS
scanimage: stepped read, 4 bytes... PASS
scanimage: stepped read, 8 bytes... PASS
scanimage: stepped read, 16 bytes... PASS
scanimage: stepped read, 32 bytes... PASS
scanimage: stepped read, 64 bytes... PASS
scanimage: stepped read, 128 bytes... PASS
scanimage: stepped read, 256 bytes... PASS
scanimage: stepped read, 512 bytes... PASS
scanimage: stepped read, 1024 bytes... PASS
scanimage: stepped read, 2048 bytes... PASS
scanimage: stepped read, 2047 bytes... PASS
scanimage: stepped read, 1023 bytes... PASS
scanimage: stepped read, 511 bytes... PASS
scanimage: stepped read, 255 bytes... PASS
scanimage: stepped read, 127 bytes... PASS
scanimage: stepped read, 63 bytes... PASS
scanimage: stepped read, 31 bytes... PASS
scanimage: stepped read, 15 bytes... PASS
scanimage: stepped read, 7 bytes... PASS
scanimage: stepped read, 3 bytes... PASS
但当我尝试做
xsane
或者
sudo xsane
它们都显示一个窗口，提示“没有可用的设备”。
没有进入
/lib/udev/rules.d/40-libsane.rules
适用于 Canon CanoScan 9000F Mark II，但有一个适用于 Canon CanoScan 9000F 的条目，因此我更改了该条目的第二个值以匹配 9000F Mark II
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="190d", ENV{libsane_matched}="yes"
# Canon CanoScan 9000F
我也编辑了
/etc/sane.d/pixma.conf
包括以下行
usb
usb 0x04a9 0x190d
但什么都没起作用。你们中那些真正理解这些内容的人可能已经明白了，我只是在黑暗中摸索，真的不知道我在做什么！:) 任何帮助都将不胜感激。谢谢。