主机设备信息和配置

主机设备信息和配置

我在 docker 容器中托管我的 owncloud 实例。我熟悉 docker 技术和可能性,但实际“操作”对我来说很新。目前我不确定我的主机设备是否像我预期的那样授予网络访问权限/速度(docker 容器使用桥接千兆位接口br0)。

主机设备信息和配置

我的主机设备支持千兆位:

tharmar@nuc:~$ dmesg |grep em1 
[    2.249914] e1000e 0000:00:19.0 em1: renamed from eth0 
[    2.262696] systemd-udevd[125]: renamed network interface eth0 to em1 
[    5.290467] device em1 entered promiscuous mode 
[    8.430199] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 
[    8.430231] br0: port 1(em1) entered forwarding state 
[    8.430240] br0: port 1(em1) entered forwarding state 
[   17.434250] br0: port 1(em1) entered forwarding state

我手动将主机 /etc/network/interfaces 更改为以下配置:

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#auto em1
#iface em1 inet dhcp
auto br0
iface br0 inet dhcp
    bridge_ports em1
    bridge_fd 9
    bridge_hello 2
    bridge_maxage 12
    bridge_stp off

我根据网上找到的教程(手头没有链接)调整了 br0 配置。在我的主机上,我达到了以下下载速度:

  • 互联网 = 5,64MB/s
  • 内部网络 = 88.0MB/s

Docker 容器信息

  • 图片:l3iggs/owncloud
  • 运行命令:

docker run --restart=always -v /media/500GB/owncloud/config:/usr/share/webapps/owncloud/config -v /media/500GB/owncloud/data:/usr/share/webapps/owncloud/data --name oc -p 80:80 -p 443:443 -d l3iggs/owncloud

docker 网络

tharmar@nuc:~$ docker network ls
NETWORK ID          NAME                DRIVER
c5444bf94367        bridge              bridge              
544630efd75a        none                null                
ab858df7af57        host                host  

docker network inspect bridge(我在这个网络中找到了我的容器)

{
    "Name": "bridge",
    "Id": "c5444bf94367cf747e0c05dc967587c608ae8401fa1fccf65233fd4334b91a43",
    "Scope": "local",
    "Driver": "bridge",
    "IPAM": {
        "Driver": "default",
        "Options": null,
        "Config": [
            {
                "Subnet": "172.17.0.0/16"
            }
        ]
    },
    "Containers": {
        "665f87dbf4f48d1ee96e71df592923323a91702b7bd0845ca59e0de6d068ce30": {
            "Name": "oc",
            "EndpointID": "7853f7630e4e1f64cd6241e1edb550906240e5acdb5cb158fe6cd5bd926171ab",
            "MacAddress": "02:42:ac:11:00:03",
            "IPv4Address": "172.17.0.3/16",
            "IPv6Address": ""
        }
        }
    },
    "Options": {
        "com.docker.network.bridge.default_bridge": "true",
        "com.docker.network.bridge.enable_icc": "true",
        "com.docker.network.bridge.enable_ip_masquerade": "true",
        "com.docker.network.bridge.host_binding_ipv4": "0.0.0.0",
        "com.docker.network.bridge.name": "docker0",
        "com.docker.network.driver.mtu": "1500"
    }
}

有人能告诉我瓶颈在哪里吗?我配置错了吗,还是根本没有配置?

如果您确实需要更多有关我的环境的信息,请随时询问,我会尽快更新问题。

相关内容