我的以太网接口不工作：当我插入以太网电缆时，端口闪烁，但连接没有任何反应。我的 wifi 卡可以正常工作。当我运行 Windows 10 时，我的以太网也是如此。
运行之后的sudo modprobe e1000e && dmesg | grep e100结果是：
[ 0.094417] pci 0000:01:00.0: reg 0x18: [mem 0xee100000-0xee10ffff]
[ 0.104039] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.203751] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.203935] pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff]
[ 3.206159] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.206162] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.206214] e1000e 0000:02:00.0: Disabling ASPM L1
[ 3.206217] e1000e 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.206455] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.263128] e1000e 0000:02:00.0: The NVM Checksum Is Not Valid
[ 3.300313] e1000e: probe of 0000:02:00.0 failed with error -5
输出sudo lshw -C Network：
*-network UNCLAIMED
description: Ethernet controller
product: 82573L Gigabit Ethernet Controller
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:ee000000-ee01ffff ioport:3000(size=32)
*-network
description: Wireless interface
product: AR5212 802.11abg NIC
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:03:00.0
logical name: ap0
version: 01
serial: 00:19:7e:a1:f1:ad
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath5k driverversion=4.15.0-58-generic firmware=N/A ip=192.168.12.1 latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: irq:17 memory:edf00000-edf0ffff
*-network:0
description: Wireless interface
physical id: 1
bus info: pci@0000:03:00.0
logical name: wls3
serial: 00:19:7e:a1:f1:ac
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=ath5k driverversion=4.15.0-58-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11
*-network:1
description: Ethernet interface
physical id: 2
logical name: enp0s29f7u1i5
serial: a6:45:64:ad:da:45
capabilities: ethernet physical
configuration: broadcast=yes driver=cdc_ether driverversion=22-Aug-2005 firmware=ZTE CDC Ethernet Device link=no multicast=yes