经过一番努力,我成功安装了 20.04 LTS,并且完全正常运行。实时更新似乎是个好主意,所以我启用了它。我通常让工作站 24/7 全天候开机。几个小时前,我试图用它观看 YouTube 视频,但我的 Sound BlasterX G6 没有声音。昨天它运行正常。
当我发现我的 NVIDIA 驱动程序也丢失时,我重新启动以检查 dmesg 输出。Ubuntu 以 640x640 分辨率启动,而不是 2560x1440。我重新安装了 NVIDIA 驱动程序并恢复了以前的分辨率。我找不到如何重新安装安装时自动安装的 Sound BlasterX G6 驱动程序。
有人能分享如何恢复我的声音的指导吗?另外,是什么原因导致我的所有驱动程序都被删除了?
编辑:
经过 Google 搜索后,我发现其他人也遇到了此硬件的问题。
我检查了上次启动时的 dmesg,看到以下内容:
[ 8.839387] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=11
[ 8.839388] usb 2-1.8: Product: Sound BlasterX G6
[ 8.839389] usb 2-1.8: Manufacturer: Creative Technology Ltd
[ 8.839390] usb 2-1.8: SerialNumber: 2F00614F63X
[ 8.840454] input: Creative Technology Ltd Sound BlasterX G6 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.3/0003:041E:3256.0003/input/input3
[ 8.897596] hid-generic 0003:041E:3256.0003: input,hidraw1: USB HID v1.00 Device [Creative Technology Ltd Sound BlasterX G6] on usb-0000:00:1d.0-1.8/input3
[ 8.898421] hid-generic 0003:041E:3256.0004: hiddev1,hidraw2: USB HID v1.00 Device [Creative Technology Ltd Sound BlasterX G6] on usb-0000:00:1d.0-1.8/input4
[ 13.012038] usb 2-1.8: USB disconnect, device number 11
[ 13.509684] usb 4-2: device descriptor read/all, error -110
[ 13.745393] usb 2-1.8: new full-speed USB device number 12 using ehci-pci
[ 13.855577] usb 2-1.8: New USB device found, idVendor=041e, idProduct=3256, bcdDevice=11.60
[ 13.855593] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=11
[ 13.855594] usb 2-1.8: Product: Sound BlasterX G6
[ 13.855595] usb 2-1.8: Manufacturer: Creative Technology Ltd
[ 13.855596] usb 2-1.8: SerialNumber: 2F00614F631
[ 13.856658] input: Creative Technology Ltd Sound BlasterX G6 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.3/0003:041E:3256.0005/input/input4
[ 13.913634] hid-generic 0003:041E:3256.0005: input,hidraw1: USB HID v1.00 Device [Creative Technology Ltd Sound BlasterX G6] on usb-0000:00:1d.0-1.8/input3
[ 13.914820] hid-generic 0003:041E:3256.0006: hiddev1,hidraw2: USB HID v1.00 Device [Creative Technology Ltd Sound BlasterX G6] on usb-0000:00:1d.0-1.8/input4
[ 18.885457] xhci_hcd 0000:08:00.0: Timeout while waiting for setup device command
[ 19.093604] usb 4-2: Device not responding to setup address.
[ 19.301378] usb 4-2: device not accepting address 3, error -71
[ 19.309486] usb usb4-port2: attempt power cycle
根据上面的 dmesg 输出,我关闭了工作站。当我重新打开电源时,我的音频输出又恢复了工作。
我唯一的问题是为什么我的 NVIDIA 驱动程序被删除了?
编辑:
运行软件更新程序后,我现在知道为什么我今天早上刚安装的驱动程序被删除了:
我刚刚发现 nvidia-450 是适用于我的硬件的驱动程序。为什么要删除这些驱动程序?我将运行更新程序,重新启动,然后查看是否再次丢失 2560x1440 分辨率。如果是,这就是我丢失它的原因。