我有一个新的 [廉价、中国制造] 外置 SSD，16TB。它显示为正确容量的 exFAT 驱动器，并在我的 Windows 工作电脑上存储数据，但在 Ubuntu 中产生一连串错误并且无法识别。
- 这里的工作有上限吗？
- 有人知道如何解决吗？
一连串的命令 (dmesg) 显示它识别出这是一个超大容量驱动器，尝试了几次，其中几次尝试了两次，然后放弃了。当我插入它时，桌面没有任何反应。
我觉得这没什么用，但它是“便携式 SSD”，外壳上写着“MOBLLE SDUD STATE”——我想这是一种警告。我不想做任何聪明的事情，比如从它启动，只是用它来处理文件。所以，细节：
[ 14.239812] mce: CPU5: Package temperature/speed normal
[ 14.239812] mce: CPU4: Package temperature/speed normal
[ 35.592132] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[ 35.741026] usb 3-3: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 1.00
[ 35.741029] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 35.741030] usb 3-3: Product: Product
[ 35.741031] usb 3-3: Manufacturer: Vendor
[ 35.741033] usb 3-3: SerialNumber: A1
[ 35.762623] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 35.762821] scsi host0: usb-storage 3-3:1.0
[ 35.762968] usbcore: registered new interface driver usb-storage
[ 35.765626] usbcore: registered new interface driver uas
[ 36.772793] scsi 0:0:0:0: Direct-Access SDK ssd 5.00 PQ: 0 ANSI: 2
[ 36.773257] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.773663] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 36.773833] sd 0:0:0:0: [sda] 4096000000 4096-byte logical blocks: (16.8 TB/15.3 TiB)
[ 36.773943] sd 0:0:0:0: [sda] Write Protect is off
[ 36.773945] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 36.774071] sd 0:0:0:0: [sda] No Caching mode page found
[ 36.774076] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 36.800741] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 36.804325] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.804328] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.804331] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.804333] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff ff 00 00 01 00
[ 36.804337] blk_update_request: critical target error, dev sda, sector 32767999992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 36.804342] Buffer I/O error on dev sda, logical block 4095999999, async page read
[ 36.804349] Alternate GPT is invalid, using primary GPT.
[ 36.804359] sda: sda1 sda2
[ 36.833251] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 36.833616] sd 0:0:0:0: [sda] Attached SCSI disk
[ 36.834546] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.834549] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.834551] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.834554] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff f0 00 00 01 00
[ 36.834557] blk_update_request: critical target error, dev sda, sector 32767999872 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 36.835039] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.835041] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.835043] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.835044] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff f0 00 00 01 00
[ 36.835046] blk_update_request: critical target error, dev sda, sector 32767999872 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 36.835049] Buffer I/O error on dev sda, logical block 4095999984, async page read
[ 36.934613] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.934617] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.934620] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.934622] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff e0 00 00 01 00
[ 36.934626] blk_update_request: critical target error, dev sda, sector 32767999744 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 36.936631] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.936634] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.936636] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.936638] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff e0 00 00 01 00
[ 36.936641] blk_update_request: critical target error, dev sda, sector 32767999744 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 36.936645] Buffer I/O error on dev sda2, logical block 4095995872, async page read
和 lsusb：总线 003 设备 005：ID 048d：1234 Integrated Technology Express, Inc. 大容量存储
答案1
好吧，我们收到了很多关于在垃圾上浪费了 20 英镑的评论。
固件是错误的，它会随机覆盖数据，我不能只设置一个较小的分区（我尝试过 - 现在 Windows 也无法识别它），因为它可能会偏离外部以平衡磨损并且会使用虚拟内存 - 我想是 WOM - 只写内存。
买者自慎 - 但这是一次有趣的探索。希望这能为其他人节省 20 英镑。准备留下反馈。感谢您的想法。