我有一个旧的 Iomega Zip100 驱动器（标记为 ATAPI），我正尝试通过 USB-ATA/SATA 桥接器访问它。在 Windows 7 下，插入它会在设备管理器中出现错误（USB 大容量存储设备：此设备无法启动）；在 Linux（Ubuntu 或 Parted Magic）下，我收到dmesg以下消息：
[ 79.600104] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 80.276845] usbcore: registered new interface driver uas
[ 80.279191] Initializing USB Mass Storage driver...
[ 80.279319] scsi5 : usb-storage 1-1:1.0
[ 80.279489] usbcore: registered new interface driver usb-storage
[ 80.279490] USB Mass Storage support registered.
[ 104.300076] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 106.816100] usb 1-1: device descriptor read/64, error -32
[ 109.400083] usb 1-1: device descriptor read/64, error -32
[ 111.972077] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 114.416080] usb 1-1: device descriptor read/64, error -32
[ 116.988076] usb 1-1: device descriptor read/64, error -32
[ 119.525052] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 119.605160] usb 1-1: device descriptor read/8, error -32
[ 119.749098] usb 1-1: device descriptor read/8, error -32
[ 122.328071] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 122.386670] usb 1-1: device descriptor read/8, error -32
[ 122.531119] usb 1-1: device descriptor read/8, error -32
[ 122.632090] usb 1-1: USB disconnect, device number 2
[ 122.632124] scsi 5:0:0:0: Device offlined - not ready after error recovery
[ 125.204064] usb 1-1: new high speed USB device number 3 using ehci_hcd
[ 129.652662] usb 1-1: device descriptor read/64, error -32
[ 132.708186] usb 1-1: device descriptor read/64, error -32
[ 135.244085] usb 1-1: new high speed USB device number 4 using ehci_hcd
[ 137.732086] usb 1-1: device descriptor read/64, error -32
[ 140.280137] usb 1-1: device descriptor read/64, error -32
[ 142.812108] usb 1-1: new high speed USB device number 5 using ehci_hcd
[ 142.897135] usb 1-1: device descriptor read/8, error -32
[ 143.041068] usb 1-1: device descriptor read/8, error -32
[ 145.564480] usb 1-1: new high speed USB device number 6 using ehci_hcd
[ 145.625696] usb 1-1: device descriptor read/8, error -32
[ 145.770217] usb 1-1: device descriptor read/8, error -32
[ 145.872236] hub 1-0:1.0: unable to enumerate USB device on port 1
我尝试了驱动器上的几种跳线设置组合（主、电缆选择/驱动器 A、非驱动器 A）；是否可以通过这样的 USB 桥接器访问 ZIP 驱动器，还是需要将其插入主板上的“正确” IDE 通道？
答案1
如果是 USB/ATAPI，您必须希望 ATAPI 部分协商出良好的传输模式，因为您无法控制它。管道损坏意味着设备断开连接，这可能表示 DMA 模式错误或电缆不符合要求 (e)SATA-IDE 转换器应该会做得不同，甚至更好。